Timberline Taper Point Drill Bit For No10 Screws

Timberline taper point drill bit gives you a dedicated way to match the pilot hole to a No10 screw, so the screw follows a tapered path that reduces splitting and improves driving in typical woodworking work. The bit is made from high speed steel, which lets it cut steadily in wood and similar materials during repeated drilling. The 1/8 inch size is tailored to create the correct tapered clearance for a No10 screw along the shank, so threads can bite while the upper portion does not bind. A 1/8 inch shank connects the cutting section to the adapter, keeping the bit centered during use in drilling tools. This drill bit belongs to the Timberline line of boring and drilling solutions, so it fits into normal shop drilling workflows where matching screw size and pilot geometry matters.

Key Drill Bit Details That Support Fast Work

• The high speed steel construction resists wear at the cutting edges, so the taper point can maintain its shape over many No10 screw pilot holes.
• The taper of the drill matches the taper of the corresponding size screw, which guides the screw straight and helps limit splitting in wood during installation.
• The drill is sized for No10 screws, so hole geometry is tuned to that screw size and helps the threads hold while the shank seats cleanly.
• The 1/8 inch shank provides a consistent interface to the drill adapter, helping the bit run true in powered drilling tools during repetitive operations.
• The 1/4 inch hex shank drill adapter connects this bit to hex-drive tools, allowing quick swaps between bits during assembly or installation work.
• The bit functions within the Timberline boring and drilling class, supporting cabinet, furniture, or general woodworking where No10 wood screws are standard.

Drill Bit Mounting And Tool Compatibility Details

This Timberline 1/8 inch x 2-3/4 inch high speed steel taper point drill bit connects through a 1/4 inch hex shank drill adapter, so it can be driven by tools that accept hex-drive bits. The drill adapter design lets the bit work in any Quick-Change chuck, so installers can shift between drilling and driving tasks with minimal downtime. The bit also functions in cordless drills, letting field installers handle No10 screw pilot holes where power outlets are not available. Standard drills can drive the bit as well, so shop environments with corded equipment can use it without special tooling. The bit also operates in screw guns, which helps production lines drill and drive No10 screws using the same general drive interface.

Using The Timberline Taper Point Bit On Real Jobs

Where This Taper Point Drill Bit Fits Best

The Timberline 1/8 inch x 2-3/4 inch high-speed steel taper point drill bit is part of a boring and drilling product class, so it suits woodworking and cabinet-related screw installation where No10 screws are in the layout. The taper of the drill matches the taper of the corresponding size screw, which tailors it to work wherever that screw size joins two or more pieces. In cabinet builds and furniture frames, that matching taper helps the No10 screw pull parts together while limiting stress near the entry hole. When used with cordless drills, installers can drill tapered pilots on site in face frames, brackets, or cleats that rely on No10 screws. In shop settings with standard drills or screw guns, the bit supports production runs of repeat pilot holes that share the same screw specification.

Why This Drill Bit Supports Consistent Results

The high speed steel construction gives the cutting edges strength, so the taper point geometry stays closer to its original profile over many holes, which helps each No10 screw seat in a predictable way. Because the taper of the drill matches the taper of the corresponding size screw, the pilot transitions from smaller at the tip to larger near the surface, so the screw threads engage consistently along their length. The 1/8 inch shank works with the 1/4 inch hex shank drill adapter to hold the bit securely, so runout is limited and holes stay aligned with layout marks. Using the bit in any Quick-Change chuck lets crews swap between this tapered pilot and a driving bit quickly, which reduces tool-handling time during repetitive No10 screw installation. The ability to run in cordless drills, standard drills, and screw guns ties this one bit into multiple stations, supporting consistent results across field and shop work.

Common Questions About This Timberline Drill Bit

Select This Bit For No10 Screw Pilot Work

The Timberline 1/8 inch x 2-3/4 inch high speed steel taper point drill bit is set up for No10 screws, so it aligns the pilot hole with that screw size. Its taper matches the taper of the corresponding size screw, which supports cleaner driving and reduced splitting in wood. With a 1/4 inch hex shank drill adapter, the bit runs in Quick-Change chucks, cordless and standard drills, and screw guns. For shops and installers standardizing on No10 screws, this Timberline taper point drill bit offers a focused way to keep pilot holes consistent across different tools.