Timberline Taper Point Drill Bit For No12 Screws

Timberline taper point drill bit is a high speed steel bit designed so the taper of the drill matches the taper of the corresponding size screw, which helps form a properly shaped pilot hole for that screw size. The Timberline 630-268 bit is described as DRILL BIT, TAPERPOINT, NO12 SCREW, so it is sized for work that uses No12 screws in wood or similar materials where a tapered pilot is preferred. The bit is a 9/64 inch x 2-15/16 inch high-speed steel taper point drill bit with a 9/64 inch shank, giving a consistent interface where a 9/64 inch shank is required. This drill bit is part of Timberline bits, blades and cutters in the boring and drilling product class, so it fits into a drilling setup focused on creating tapered pilots before driving screws.

Key Details That Support Drilling Performance

• The high speed steel material is specified for this Timberline drill bit, which supports durable cutting edges under typical boring and drilling tasks where a tapered pilot hole is required before driving screws.
• The 9/64 inch x 2-15/16 inch size defines the bit length and cutting diameter, which helps match the drill to layouts where that specific pilot diameter and overall length fit the workpiece thickness and drilling depth.
• The taper of the drill is stated to match the taper of the corresponding size screw, which shapes the pilot hole to follow the screw profile so the screw engages gradually along its length instead of biting only at the tip.
• The Timberline 630-268 description lists this as DRILL BIT, TAPERPOINT, NO12 SCREW, which aligns the bit to applications using No12 screws so hole sizing stays consistent with that screw standard during assembly.
• The 9/64 inch shank is identified for this bit, which matters when selecting chucks or adapters that accept a 9/64 inch shank so the bit seats correctly and runs true while drilling.

Mounting And Drill Interface For Daily Use

This Timberline taper point drill bit is specified with a 1/4 inch hex shank drill adapter, so it can be used in interfaces that accept hex shank tools while still presenting its 9/64 inch shank to the adapter. The hex shank adapter detail connects directly to quick-change workflows, because the web description states that it can be used in any Quick-Change chuck. The same description notes use in cordless and standard drills, and screw guns, which ties the bit to common jobsite and shop drill drivers without requiring special machines. The 9/64 inch shank sizing works with the adapter arrangement to create a stable grip, so the bit can be driven by the drill while the hex adapter engages the chuck.

Using This Drill Bit In Real Install Work

Where The Timberline Taper Point Drill Bit Fits

This Timberline 9/64 inch x 2-15/16 inch high speed steel taper point drill bit fits drilling tasks that call for a tapered pilot sized for a No12 screw, as identified by the DRILL BIT, TAPERPOINT, NO12 SCREW description. When a project uses No12 screws, the fact that the taper of the drill matches the taper of the corresponding size screw helps the pilot track the screw body form. This supports applications where screws must pull parts together cleanly, because a pilot that follows the screw taper allows the screw to advance into the material rather than wedge the fibers abruptly. The product category of bits, blades and cutters under boring and drilling also positions this drill bit as part of a drilling setup for woodworking and similar material fastening using screws.

Why The Design Supports Consistent Pilot Holes

The Timberline taper point drill bit is made from high speed steel, and that material choice supports edges that cut a clean tapered pilot when used within its intended boring and drilling scope. The specified 9/64 inch x 2-15/16 inch dimensions provide a known pilot diameter and working length, so hole depth and reach can be planned to match workpiece thickness where No12 screws are used. The 9/64 inch shank balances with the cutting size, which allows the bit to be supported by the 1/4 inch hex shank drill adapter while still presenting its 9/64 inch body through the material. Because the web description confirms that the drill bit can be used in any Quick-Change chuck, cordless and standard drills, and screw guns, installers can keep one bit aligned across different drivers while maintaining the same tapered pilot profile.

Common Questions About This Timberline Drill Bit

Selecting This Drill Bit For Tapered Screw Work

The Timberline 9/64 inch x 2-15/16 inch high speed steel taper point drill bit 630-268 ties directly to projects that rely on No12 screws and need a tapered pilot that follows the screw shape. The stated match between the drill taper and the corresponding size screw supports consistent pilot geometry, while the 1/4 inch hex shank drill adapter and 9/64 inch shank connect the bit to Quick-Change chucks, cordless and standard drills, and screw guns. For work involving No12 screws where a tapered pilot is specified, this Timberline taper point drill bit offers a defined size and interface that match that task.