Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
10 inch appliance pull describes this Schaub and Company handle with a 10 inch center to center drilling that aligns wide appliance panels or tall cabinet doors along a straight, predictable line. The pull belongs to the Traditional Series, so its styling supports classic kitchen and built-in designs where a consistent look matters across doors and large panel fronts. The material is solid brass, which gives the handle a dense feel that installers appreciate when fastening through appliance-panel thicknesses and heavy cabinetry. The finish is oil rubbed bronze, so it delivers a dark, traditional tone that pairs with matching hinges and smaller pulls in similar finishes. The handle width is 1 inch, giving the hand a defined edge to grip when opening heavier doors. A projection of 2-1/8 inches creates space between the panel and the userâ??s knuckles, helping movement stay clear of raised door profiles.
The 10 inch center to center dimension on this Schaub and Company appliance pull defines where to drill through doors or appliance panels, so layouts can be repeated accurately from front to front. The handleâ??s 10-1/2 inch overall length gives a small extension past those centers, creating a visually centered pull that still respects the fixed drilling pattern. A 2-1/8 inch projection sets the handle off the surface, so front-mounted fasteners can be planned without crowding nearby trim or adjacent hardware. The 1 inch width provides a clear, straight reference edge that can help align the pull parallel to door edges or cabinet rails during layout work. Together, these measurements allow installers to map handle positions and drilling steps using straightforward, repeatable dimensions.
The Schaub and Company 739-10B appliance pull, identified in the Classic Series and Traditional Series references, is built around a 10 inch center to center drilling that suits tall doors, panel-ready appliances, and wide pantry fronts where a longer grip looks proportional. The oil rubbed bronze finish ties into traditional and classic design schemes, so it works on face-framed kitchens, detailed door styles, and built-ins with warm-toned hardware. The 1 inch width and 10-1/2 inch overall length let the pull visually anchor larger fronts, giving users a clear point of contact on heavy doors. Because the pull is made from solid brass, it matches other solid brass decorative hardware from similar collections, allowing a continuous material story on doors, drawer fronts, and integrated appliance panels.
The 10 inch appliance pull layout starts with the 10 inch center to center spacing, which lets installers create drilling jigs or templates that can be used across multiple cabinet runs, saving layout time from one opening to the next. The 10-1/2 inch overall length means there is only a quarter inch of handle extending beyond each mounting point, resulting in predictable clearances at stiles and panel edges. With a 2-1/8 inch projection, the gripping surface stays well off the face of doors and panels, which reduces the chance of fingers brushing adjacent fronts when appliances or tall doors swing. The 1 inch width gives a flat, steady bar that helps keep the pull square to door edges during final tightening. The solid brass construction supports a secure feel when the pull is fastened through thicker appliance panels or reinforced cabinet doors. The oil rubbed bronze finish maintains a unified appearance wherever the same finish is specified on related handles and pulls.
The 10 inch appliance pull has a 10 inch center to center dimension, which sets the drilling distance between mounting holes for consistent handle placement.
The Schaub and Company 739-10B appliance pull has a 10-1/2 inch overall length, giving slight overhang beyond the 10 inch mounting centers for a balanced look.
The appliance pull projects 2-1/8 inches from the mounting surface, providing hand clearance between the gripping bar and the cabinet or appliance panel face.
The Traditional Series appliance pull is made from solid brass, giving it a substantial feel that suits heavy doors and panel-ready appliance fronts.
This Schaub and Company handle has an oil rubbed bronze finish, aligning with traditional hardware palettes and matching other oil rubbed bronze decorative pieces.
The solid brass appliance handle is 1 inch wide, creating a defined gripping surface that works well on tall cabinet doors and wider appliance panels.
The 10 inch appliance pull from Schaub and Company combines a 10 inch center to center drilling, 10-1/2 inch overall length, and 2-1/8 inch projection to support predictable layouts on large fronts. The solid brass construction and oil rubbed bronze finish align with traditional designs and heavier doors. For projects where a Traditional Series style, 1 inch grip width, and consistent 10 inch drilling pattern matter, this 739-10B pull from Wurth Baer Supply provides a defined hardware choice for appliance panels and tall cabinet runs.