Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rev-A-Shelf base cabinet filler adds pull-out storage to a narrow space in new base cabinet construction. This maple base cabinet filler is the Rev-A-Shelf 432 series model 432-BF-3C, built as a 3 inch base cabinet filler with four adjustable wood shelves. The unit comes fully assembled and uses one top and two bottom pre-mounted full extension ball bearing slides. Those slides provide a verified 135 lb load rating. Chrome rails on the adjustable wood shelves help keep items contained during use. For buyers searching by part number, 432-BF-3C and RS432-BF-3C refer to this narrow wood cabinet filler organizer for base cabinets. The listed filler height is 30 inches, and the product is intended for new cabinet construction only.
Key specs to confirm: This 3 inch base cabinet filler is a Rev-A-Shelf 432 series maple pull-out designed for base cabinets. The verified height is 30 inches, and this specific model includes four adjustable wood shelves with chrome rails. Confirm that your cabinet plan includes space for a filler of this width and height, and confirm that the project is new cabinet construction because the product data states fillers can only be installed with new cabinet construction. Verify the opening layout, surrounding cabinet dimensions, and installation clearances needed for one top and two bottom pre-mounted full extension ball bearing slides. The verified load rating is 135 lb. Any additional dimensional tolerances or installation details should be confirmed with the manufacturer or technical documentation.
What's included: One fully assembled Rev-A-Shelf 432-BF-3C base cabinet pull-out filler in maple, four adjustable wood shelves, chrome rails on the shelves, and pre-mounted full extension ball bearing slides.
What to verify before ordering: Confirm the cabinet is being built new, confirm the planned filler width is 3 inches, confirm the required 30 inch height works with your cabinet run, and confirm slide clearance, adjacent door and drawer interference, and intended storage weight.
A base cabinet pull-out filler is often chosen when a kitchen layout leaves a narrow gap between cabinets, appliances, or end panels. Instead of covering that space with a fixed strip, a buyer may want a usable storage area for slim items that are hard to place elsewhere. This Rev-A-Shelf 432 series organizer is built for that type of application. The 3 inch base cabinet filler format works where a wider organizer would not fit, and the pull-out design helps bring stored items forward for easier access.
For installers, the fully assembled construction can simplify planning because the main unit, adjustable wood shelves, chrome rails, and pre-mounted slide system are already part of the product. For homeowners and serious DIY buyers, the four adjustable wood shelves allow shelf spacing changes based on what will be stored. That matters when the organizer is used for spices, wraps, oils, or other narrow kitchen items that vary in height.
The verified slide setup is also important. This 432-BF-3C uses one top and two bottom pre-mounted full extension ball bearing slides. Full extension travel helps the buyer reach contents farther back in the organizer. The verified 135 lb load rating gives a clear reference point when deciding whether the intended contents fit the product's stated capacity. If a project involves unusually heavy items or a special cabinet layout, the buyer should confirm the exact installation guidance with the manufacturer before ordering.
This wood cabinet filler organizer is also not a universal retrofit item. The product data states that fillers can only be installed with new cabinet construction. That requirement matters in remodel planning. If the cabinet run is already built, the buyer should confirm whether the existing layout can accept this product before assuming fit. The listed filler height is 30 inches, so matching that height to the cabinet design is another early checkpoint.
When comparing base cabinet filler products, buyers usually look at material, shelf configuration, slide type, assembly status, and installation context. This Rev-A-Shelf base cabinet filler gives verified details in each of those areas. It is a maple unit, it comes fully assembled, it includes four adjustable wood shelves with chrome rails, and it uses full extension ball bearing slides that are pre-mounted at one top and two bottom positions.
That level of product definition helps buyers avoid vague listings that do not clearly state what is included or how the organizer is meant to be installed. The 30 inch height and 3 inch width are also useful for cabinet planning because narrow fillers must match the cabinet run closely. The new construction requirement is especially important in comparison shopping, since some buyers may assume every filler can be added later. Here, the verified product data says otherwise, so the project should be planned around that requirement.
Another practical comparison point is shelf adjustability. Adjustable wood shelves can support changing storage needs over time, while chrome rails help keep contents better contained during pull-out movement. For buyers searching by model references such as RS432-BF-3C or 432-BF-3C, this listing identifies the product clearly as a Rev-A-Shelf 432 series base cabinet pull-out filler rather than a generic trim piece.
The Rev-A-Shelf 432-BF-3C is a pull-out base cabinet filler with shelves, not a fixed cover strip.
The Rev-A-Shelf 432-BF-3C is made for base cabinet applications.
The product data states this base cabinet filler can only be installed with new cabinet construction.
This Rev-A-Shelf base cabinet filler is the 3 inch wide version with a listed height of 30 inches.
The 432-BF-3C includes four adjustable wood shelves with chrome rails.
This base cabinet pull-out filler uses one top and two bottom pre-mounted full extension ball bearing slides.
The Rev-A-Shelf 432 series filler has a verified 135 lb load rating.
The product data says the Rev-A-Shelf base cabinet filler comes fully assembled.
The buyer should confirm new construction status, 3 inch filler space, 30 inch height fit, slide clearance, and nearby door or drawer interference.
Additional installation dimensions are not verified here, so follow manufacturer installation guidance and local building requirements where applicable.
Rev-A-Shelf 432 series gives buyers a clearly defined base cabinet pull-out filler for narrow storage in new cabinet construction. This maple base cabinet filler comes fully assembled with four adjustable wood shelves, chrome rails, and pre-mounted full extension ball bearing slides. Before purchase, confirm the 3 inch width, 30 inch height, cabinet layout, and slide clearance needed for your build. Checking those fit details early helps you order the correct 432-BF-3C for the cabinet run you are planning.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  RS432-BF-9C Mfr# 432-BF-9C | Rev-A-Shelf 432 Maple 9" 4-Shelf Base Cabinet Fillers with Standard Slides, 432-BF-9C | ||||
Sold in: 1 Each |  RS432-BF-6C Mfr# 432-BF-6C | Rev-A-Shelf 432 Maple 6" 4-Shelf Base Cabinet Fillers with Standard Slides, 432-BF-6C |
