EPCO BP Pull 5-1/16" (128 mm) Center to Center, Stainless Steel, BP128-SS

EPCO Stainless Steel Bar Pull For Cabinets

EPCO stainless steel bar pull gives cabinets a straight modern grip using a 5-1/16 inch (128 mm) center to center layout, so installers can line up drill points accurately across multiple doors and drawers. The pull is part of the EPCO BP Series, which keeps the look consistent when using several sizes on the same project. Stainless steel material creates a solid-feeling handle that stands up to repeated daily use on busy kitchen or commercial cabinet runs. The stainless steel finish matches the base metal, so any minor wear shows less contrast over time on working surfaces. Overall length of 7-3/8 inch leaves enough bar past the screw posts for a comfortable grab, helping users open heavier fronts without fingers slipping. A projection of 1-27/64 inch spaces the hand away from the cabinet face, which helps prevent knuckles from hitting door edges during operation.

Key Stainless Steel Bar Pull Details For Jobs

• The 5-1/16 inch (128 mm) center to center dimension sets a standard hole pattern, which simplifies layout on new cabinet doors and helps align multiple pulls in a straight, repeatable run.
• The stainless steel material forms a rigid bar, giving the pull a solid feel during opening and closing and supporting use on frequently accessed cabinet fronts.
• The stainless steel finish matches the material, so handling wear blends with the surface and keeps visual changes more uniform across a bank of cabinets.
• The 7-3/8 inch overall length provides extended bar ends beyond the posts, offering users more grab area when pulling on wider or heavier doors and drawers.
• The 1-27/64 inch projection holds the gripping surface away from the cabinet face, giving fingers clearance behind the bar and reducing contact with door or drawer fronts.
• The 8-32 x 1 inch screw size pairs with the pull threads, allowing straightforward fastening into standard cabinet door and drawer thicknesses using common shop tools.

Mounting Dimensions And Fit For This Pull

The 128 mm center to center mounting on the EPCO BP128-SS stainless steel bar pull establishes a precise spacing between screw holes, which supports accurate drilling with jigs or templates across cabinet runs. At 5-1/16 inch between fasteners, the pull fits layouts that follow metric 128 mm spacing, so shop drawings and onsite installation can reference both metric and imperial values. The 7-3/8 inch overall length defines how much of the handle shows on the front, which helps in planning visual balance on narrower or wider drawer fronts. A projection of 1-27/64 inch from the mounting surface sets how far the handle stands off the face, leaving enough space for fingers to wrap behind the bar without rubbing painted or laminated fronts. Using an 8-32 x 1 inch screw size aligns the pull with common cabinet construction, keeping mounting straightforward during production or retrofit work.

Using The BP128-SS Pull In Cabinet Projects

Where This EPCO BP Series Pull Fits Best

The EPCO BP Series BP128-SS stainless steel bar pull works on cabinet doors and drawers that benefit from a 128 mm center to center layout, so it fits designs based on widely used metric drilling patterns. Its 5-1/16 inch hole spacing allows it to sit comfortably on standard kitchen base cabinets, wall cabinets, and similar casework where mid-length pulls are preferred for leverage and proportion. The 7-3/8 inch overall length gives enough span to look balanced on medium-width drawer fronts, which helps maintain a consistent line when used alongside other EPCO BP Series sizes in the same project. Stainless steel material and a stainless steel finish give the pull a uniform appearance across residential or light commercial cabinetry where a brushed metal look is part of the design scheme. With a projection of 1-27/64 inch off the face, the handle clears typical door styles and drawer fronts, supporting everyday gripping without the user's hand crowding the cabinet surface during opening.

Details That Support Repeatable Cabinet Installations

The 128 mm center to center measurement on the BP128-SS stainless steel bar pull contributes to repeatable installations because installers can set drilling jigs once and run the same pattern across many cabinet fronts. This 5-1/16 inch spacing also coordinates with common factory-bored patterns, which helps align replacement work when updating fronts that already use the 128 mm standard. The 1-27/64 inch projection controls how far the bar stands off the cabinet face, giving installers a known clearance dimension when coordinating with nearby doors, appliances, or adjacent hardware on tight layouts. Its 7-3/8 inch overall length provides a predictable visual footprint, which aids in laying out pulls in straight horizontal lines along stacked drawers or across banks of cabinets. Stainless steel material combines with the stainless steel finish to keep the appearance consistent from one piece to the next, helping larger jobs present a uniform line of hardware when all pulls from the EPCO BP Series are mounted to the same specifications. The specified 8-32 x 1 inch screw size ties the handle to a standard machine thread, allowing fabricators to prep doors and drawers for this thread specification during shop assembly.

Common Questions About The BP128-SS Bar Pull

Selecting This Pull For Cabinet Installations

The EPCO BP128-SS stainless steel bar pull combines a 5-1/16 inch (128 mm) center to center pattern, 7-3/8 inch overall length, and 1-27/64 inch projection, giving installers a known set of dimensions for cabinet layout. Stainless steel material with a matching stainless steel finish supports projects that call for a consistent metal appearance on doors and drawers. With mounting based on 8-32 x 1 inch screws, this handle aligns with standard cabinet construction practices, streamlining installation on both shop-built and onsite work. Use this pull when a metric 128 mm pattern and stainless steel look match the cabinet design requirements.