Berenson Euro Rustica Series 2-1/2" (64 mm) Center to Center Rustic Iron Cup Pull, - 2975-1RI-C

Euro Rustica Cup Pull For Cabinet Projects

Euro Rustica cup pull 64mm center to center identifies this Berenson Corporation cabinet pull as a 2-1/2 inch center to center handle designed for standard drilled hole spacing on cabinet doors or drawers. The cup pull design creates a recessed grip that gives fingers a defined place to pull, helping users open and close fronts with a controlled handhold. The Euro Rustica name ties this pull to the Euro Rustica collection, allowing coordinated use across a project for a consistent visual line on multiple fronts. The material is zinc die cast, which provides a rigid formed body so the pull keeps its shape under typical opening and closing loads. The finish is Rustic Iron, giving the pull a dark, textured metal look that supports rustic or traditional cabinet styles where a weathered appearance is desired.

Key Euro Rustica Details That Support Use

• The center to center dimension is 2-1/2 inches (64 mm), so the mounting points align with common cabinet drilling patterns and streamline layout across multiple doors and drawers.
• The overall length is 5-1/8 inches, which spreads the visual mass of the pull across more of the drawer front and offers a wider gripping span for different hand positions.
• The projection is 1 inch, giving clearance between the cabinet face and the pull so fingers slide under the cup edge without crowding adjacent doors or trim.
• The width is 1-3/8 inches, which defines the vertical footprint on the face and helps plan rail heights and spacing when lining up multiple pulls in a row.
• The material is zinc die cast, delivering a solid metal part that accepts the Rustic Iron finish cleanly for a uniform appearance on every installed pull.

Mounting And Size Details For Euro Rustica Pull

This Berenson Euro Rustica cup pull is specified with a 2-1/2 inch (64 mm) center to center dimension, which ties directly into standard bore patterns when laying out cabinet hardware. The projection of 1 inch keeps the pull standing off the face just enough to get fingers behind the cup, without protruding excessively into walk paths or tight spaces. The 5-1/8 inch length and 1-3/8 inch width define a clear mounting footprint that helps position the pull on rails and stiles so edges and reveals remain balanced. The screw size is M4 x 45mm, indicating a metric threaded connection sized for common cabinet front thicknesses where metric hardware is used.

Euro Rustica Cup Pull Use And Fit Considerations

Where This Rustic Iron Cup Pull Works Best

The Rustic Iron finish on this Euro Rustica cabinet cup pull creates a dark, aged metal look that pairs well with wood cabinetry where a traditional or rustic appearance is desired. The cup style design focuses the grip beneath the lip of the pull, which suits drawer fronts and doors that are opened from the lower edge. With a 5-1/8 inch length, the pull spans a useful portion of typical drawer widths, giving users a stable grasp even when pulling from one side. The 1 inch projection sets the cup away from the face enough for fingers to reach under comfortably, which is practical on thicker door profiles or applied moldings.

The 2-1/2 inch (64 mm) center to center specification connects directly to a widely used hole spacing, so it works on new cabinet builds drilled for this measurement or on existing fronts already bored at that distance. The 1-3/8 inch width keeps the pull compact vertically, fitting nicely on narrower rails while still showing enough surface area for the Rustic Iron finish to be visible. Being part of the Euro Rustica collection, this pull can be matched visually with other hardware pieces from the same line, supporting a consistent design across doors, drawers, and different cabinet runs.

Details That Support Consistent Installation Results

The 2-1/2 inch (64 mm) center to center measurement gives a fixed reference for drilling, which helps installers repeat placement across a bank of cabinets with minimal layout variation. The 5-1/8 inch overall length means that, once centered on the bore pattern, the pull will extend a predictable distance to each side, simplifying alignment with neighboring fronts. The 1 inch projection defines how far the pull stands off the surface, which helps plan clearances near adjacent walls, appliances, or overlapping doors.

The 1-3/8 inch width provides a known vertical span, making it easier to place the pull evenly on narrow or wide rails while maintaining consistent margins from panel edges. The zinc die cast construction creates a stable, dimensionally consistent body so each 2975-1RI-C pull seats against the cabinet face in the same way. The specified M4 x 45mm screw size indicates a matching metric thread, which supports direct fastening through standard cabinet door and drawer front thicknesses that are drilled for M4 hardware, contributing to secure mounting.

Common Questions About The Euro Rustica Cup Pull

Select This Euro Rustica Pull For Matching Jobs

The Euro Rustica cup pull 64mm center to center from Berenson Corporation combines a 2-1/2 inch mounting spread, 5-1/8 inch overall length, and Rustic Iron finish to support coordinated cabinet projects. With zinc die cast construction, 1 inch projection, and 1-3/8 inch width, it offers a defined footprint for planning layouts on doors and drawers. For projects using the Euro Rustica collection and 2975-1RI-C specifications, this pull provides a consistent hardware option that aligns visual style, hole spacing, and grip feel across multiple cabinet fronts.