Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson stainless steel pull 7067-9SS-C is a long Stainless Steel Series handle that provides a continuous grip area across wider cabinet fronts, which helps when opening tall doors or broad drawers with one steady pull. The stainless steel material creates a consistent look with other stainless hardware in a project, which supports a coordinated appearance across multiple cabinets. The pull length of 28-3/8 inches spreads the hand contact over a larger area, which can reduce localized stress on the cabinet surface during repeated use. A center to center dimension of 26-7/16 inches defines the mounting hole spacing, which matters when laying out drilling patterns or matching existing holes during cabinet updates. The 1-1/4 inch projection sets how far the handle stands off the face, which affects finger clearance. The 1/2 inch width establishes a slim profile, which can help when arranging multiple fronts in tight reveals.
The 26-7/16 inch center to center figure gives the critical distance between mounting points, which guides drilling when preparing new cabinet fronts or aligning to an existing pattern. The 28-3/8 inch overall length shows how much bar will visually extend across the surface, which influences where the pull is positioned on tall doors or wide drawers. A projection of 1-1/4 inches sets the space between the cabinet face and the grip area, which affects hand clearance when pulling from above, below, or the side. The 1/2 inch width defines the thickness of the pull in the viewing direction, which can matter when coordinating with neighboring fronts where space between edges is tight. The M4 x 45mm screw size specification points to the fastener thread and length, which ties directly into how the pull seats against standard cabinet materials during mounting.
This Berenson Stainless Steel Series pull, with its 28-3/8 inch overall length, suits wider cabinet doors and drawers where a longer grip bar better matches the scale of the front. The 26-7/16 inch center to center spacing works for layouts that favor extended pulls across pantry doors or large base cabinets, because the mounting points land far apart for a stretched visual line. The stainless steel material and stainless steel finish support use in projects that already rely on stainless elements, so the handle can sit comfortably next to stainless appliances or other stainless hardware. The 1/2 inch width maintains a lean profile along the cabinet surface, which is useful on fronts where a bulky handle could visually crowd the design. The 1-1/4 inch projection also shapes how the pull feels in hand, as the stand-off leaves room to curl fingers behind the bar on deeper fronts.
The defined 26-7/16 inch center to center value allows repeatable hole placement across multiple doors and drawers, which supports straight, level hardware lines on installed cabinets. Because the overall length is fixed at 28-3/8 inches, each pull presents the same visual span on every front, which helps create a uniform rhythm across a run of cabinetry. The 1/2 inch width keeps the handle thickness consistent from one unit to the next, which assists in maintaining the same sightline profile regardless of door size. With the projection set at 1-1/4 inches, the distance from the cabinet face to the grip stays predictable, which is helpful when aligning pulls so they clear raised profiles or adjacent panels. The stainless steel construction and finish remain the same on each piece, which keeps color and surface character aligned as hardware is repeated through a kitchen or other built-ins.
The pull has an overall length of 28-3/8 inches, a center to center of 26-7/16 inches, a projection of 1-1/4 inches, and a width of 1/2 inch, which guides layout and visual proportion.
The 26-7/16 inch center to center provides the exact spacing between mounting holes, which directs drilling when setting up new fronts or matching an existing pattern.
The pull uses stainless steel material with a stainless steel finish, which keeps appearance consistent with other stainless components in a project.
The 1-1/4 inch projection sets the stand-off from the cabinet face, which determines how much space is available for fingers behind the pull during use.
The M4 x 45mm screw size indicates the thread and length referenced for this pull, which relates to how it fastens through typical cabinet doors or drawers.
The Stainless Steel Series designation places this pull within a defined Berenson collection, which helps maintain stylistic consistency when selecting other handles from the same series.
The Berenson Stainless Steel Series pull 7067-9SS-C combines a 28-3/8 inch length with a 26-7/16 inch center to center pattern, which suits wider cabinet fronts that benefit from a long, continuous grip. Its stainless steel material and stainless steel finish align with projects that emphasize stainless elements, helping hardware match nearby stainless components. With a 1-1/4 inch projection and 1/2 inch width, the pull provides predictable clearance and a slim visual line, which is useful when planning hardware across multiple doors and drawers. For projects that need consistent dimensions and a defined series identity, this Berenson stainless steel pull offers a clear, repeatable set of measurements to work into cabinet layouts.
Sold In: 1 Each
