Berenson Stainless Steel Series 8-13/16" (224 mm) Center to Center Stainless Steel Pull, - 7070-9SS-C

Stainless Steel Pull 224mm For Cabinet Use

stainless steel pull 224mm describes a Berenson Stainless Steel Series handle designed as a functional pull for cabinet and furniture doors or drawers, so it gives a defined gripping point wherever a consistent opening motion is needed. The center to center mounting dimension of 8-13/16 inches, or 224 mm, sets the exact spread for the two mounting points, which helps match drilling layouts across multiple fronts. The overall length of 10-13/16 inches provides extended hand contact area, which supports comfortable operation on wider or taller fronts. Its stainless steel material forms a solid, metal construction that supports repeated pulling in everyday woodworking environments. The stainless steel finish visually aligns with other stainless details, which helps maintain a coordinated hardware appearance. As part of the Berenson Stainless Steel Series, the pull follows a consistent style language, which matters when repeating hardware across an entire project.

Stainless Steel Series Pull Details That Matter

• The stainless steel material creates a sturdy handle body, which supports frequent opening and closing motions on cabinets in active workspaces.
• A stainless steel finish maintains a uniform metallic look, which helps the pull visually coordinate with stainless hinges, appliances, or trim in the same area.
• The 8-13/16 inch center to center dimension fixes the drilling pattern, which simplifies laying out a straight row of pulls using the same hole spacing.
• The 10-13/16 inch overall length extends beyond the mounting points, which offers more hand contact area on wider drawers or doors.
• A projection of 1-1/4 inches spaces the grip away from the surface, which creates clearance for fingers to hook behind the pull during use.
• A width of 1/2 inch defines the grip thickness, which creates a predictable feel along the bar for consistent opening force.
• A base diameter of 1/2 inch sets a compact footprint at each end, which helps the pull sit neatly on face frames or slab fronts.
• The M4 x 45mm screw size specification defines the thread and length, which aligns the pull with common cabinet boring setups using metric mounting.

Mounting And Fit Details For This Berenson Pull

The 8-13/16 inch center to center measurement defines the hole spacing for this Berenson Corporation pull, so it fits layouts bored to that exact distance. The specified M4 x 45mm screw size sets the thread pattern that engages the pull, which supports consistent fastening into drilled fronts that accept metric machine screws. A projection of 1-1/4 inches determines how far the handle stands off the surface, which provides working finger space while keeping the profile compact on door and drawer faces. The 1/2 inch width and 1/2 inch base diameter define the bar and foot proportions, which help the pull seat evenly against flat cabinet faces. Together, these dimensions give installers a defined template for drilling and positioning when repeating this handle across multiple units.

Using This 10-13/16 Inch Stainless Steel Pull

Where This Berenson Stainless Steel Pull Fits Best

This Berenson Stainless Steel Series pull, with an 8-13/16 inch center to center, suits cabinet and furniture applications laid out for that mounting spread, so it integrates into projects based on that drilling standard. The overall length of 10-13/16 inches makes it well suited to wider drawers or doors, where a longer handle improves reach across the front. Its stainless steel material aligns with woodworking projects that feature other metal components, so the pull becomes part of a coordinated hardware set. A stainless steel finish visually supports installations around stainless-faced appliances or fixtures, which can help unify the appearance across a kitchen or work area. With a projection of 1-1/4 inches and a 1/2 inch bar width, the pull offers a defined gripping edge, which is useful on fronts that see frequent use throughout the day.

Dimensional Details That Support Repeatable Results

The specified 224 mm, or 8-13/16 inch, center to center distance lets installers base jigs and drilling patterns on a single fixed value, which supports fast, repeatable mounting across banks of cabinets. The 10-13/16 inch overall length defines how far the bar extends beyond the mounting holes, which assists with aligning the handle relative to door or drawer edges for a consistent visual reveal. A projection of 1-1/4 inches controls how far the pull stands off the face, which helps keep doors and drawers from contacting adjacent surfaces when gripped from the side. The 1/2 inch width and 1/2 inch base diameter establish the bar and foot size, which clarifies how the pull will sit on narrow rails or thicker slab fronts. The M4 x 45mm screw size pairs the handle with a common machine thread, which helps streamline installation workflows built around metric fasteners. As a product of Berenson Corporation in the Handles and Pulls class, the part number 7070-9SS-C ties these dimensions and finish to a specific catalog item, which aids consistent reordering for future phases of the same project.

Common Questions About This Berenson Cabinet Pull

Select This Stainless Steel Pull For Precise Layouts

The Berenson Stainless Steel Series 7070-9SS-C pull combines stainless steel construction, a stainless finish, and a 224 mm center to center layout, so it supports consistent cabinet hardware spacing. With defined dimensions for length, projection, width, and base diameter, the handle offers predictable results across doors and drawers laid out to the same drilling standard. For projects built around stainless hardware and metric mounting details, this pull aligns appearance and measurements in a single part ready for repeat use.