Berenson Andante 2-1/2" (64 mm) Center to Center Brushed Nickel Cup Pull, 7884-1BPN-P

Berenson Andante Cup Pull For Cabinet Projects

Berenson Andante cup pull is a zinc die cast cabinet handle in the Andante collection with a brushed nickel finish, so it gives casework a consistent look using a defined series and metal base. The 2-1/2 inch (64 mm) center to center drilling sets a standard mounting spread, which helps align multiple pulls on doors and drawers using common boring patterns. The pull length of 4-1/16 inches covers typical drill errors slightly, so minor layout shifts stay hidden once the pull is mounted. A projection of 1 inch keeps the grip close to the front, which helps when working around tight walkways or adjacent doors. The width of 1-1/4 inches provides a stable hand contact area, which helps users get a secure grip when opening heavier cabinet drawers or doors.

Key Andante Series Details For Daily Use

• The Andante collection designation ties this cup pull to a named series, which helps match new installations to existing Berenson Andante hardware across a shop or project.
• The zinc die cast material creates a metal body for the pull, which supports repeated handling on cabinet doors and drawers in residential or shop environments.
• The brushed nickel finish gives the pull a muted metal appearance, which helps it coordinate with other brushed nickel hardware on cabinets and furniture.
• The 4-1/16 inch overall length spans past the 2-1/2 inch (64 mm) center to center points, which helps cover the drilled area around mounting holes on the cabinet front.
• The 1-1/4 inch width creates a modest cup profile, which provides finger clearance inside the pull while keeping the footprint contained on narrower rails.

Mounting Size And Fit For This Cup Pull

The 2-1/2 inch (64 mm) center to center dimension defines the hole spacing, so installers can drill or reuse standard 64 mm patterns when setting this Berenson Andante cup pull. The cup pull body length of 4-1/16 inches gives enough coverage around the mounting points, which helps conceal chips or slightly oversized holes in the face material. With a projection of 1 inch, the pull stands just far enough off the surface to create a usable finger grip, which helps when drawers are flush with adjacent fronts. The 1-1/4 inch width manages the cup depth and edge distance, which matters when laying out pulls on narrow rails or stile faces that have limited vertical space.

Using The Berenson 7884-1BPN-P In Cabinet Work

Where This Brushed Nickel Cup Pull Works Best

This Berenson Andante Series 7884-1BPN-P cup pull is part of the decorative Handles and Pulls class, so it fits cabinet and furniture applications where appearance and function both matter. The 2-1/2 inch (64 mm) center to center spacing aligns with a common drilling pattern, which suits new builds that follow metric or imperial jigs in that range. The brushed nickel finish matches other brushed nickel decorative hardware, which helps keep a unified look across doors, drawers, and panels. The zinc die cast construction supports use on frequently accessed fronts, which benefits kitchen, bath, or shop cabinets that see regular opening cycles. The 4-1/16 inch length and 1-1/4 inch width give the pull a compact footprint, which works on smaller drawer fronts and narrow face frames where larger pulls could look oversized.

Details That Support Repeatable Layout And Results

The defined 2-1/2 inch (64 mm) center to center measurement simplifies jig setup, which helps installers repeat hole spacing across a run of cabinets using one consistent setting. The 1 inch projection sets a predictable standoff from the surface, which helps avoid interference with adjacent doors or walls when planning reveals. The overall length of 4-1/16 inches gives a known coverage distance, which lets installers position holes so the cup pull edges align visually across multiple fronts. The 1-1/4 inch width keeps the pull profile tight, which matters when aligning hardware between rails, raised panels, or molding details. Being part of the Andante collection lets shops standardize on this profile, which helps with future replacements or additions that must match existing Berenson Andante hardware.

Common Questions About This Andante Cup Pull

Select This Cup Pull For Matching Cabinet Runs

The Berenson Andante cup pull in brushed nickel combines a 2-1/2 inch (64 mm) center to center layout with a 4-1/16 inch length and compact 1-1/4 inch width, so it suits cabinet fronts needing consistent sizing. The zinc die cast construction and Andante collection styling align with other Berenson decorative Handles and Pulls, which helps keep projects visually unified. For cabinet work built around a 64 mm drilling pattern and a brushed nickel finish, this Berenson 7884-1BPN-P cup pull offers a defined option for drawers and doors.