
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Berenson Andante cabinet pull sets up a consistent handle layout around a 3-3/4 inch center to center drilling pattern, so cabinet doors and drawers line up visually across a run. This pull is part of the Andante Collection from Berenson Corporation, tying into a defined style family for coordinated installations. The pull is made from zinc die cast, giving a solid metal body that handles repeated use on active cabinets. Its antique pewter finish establishes a muted, traditional look that blends with many stained or painted cabinet surfaces in shops, kitchens, or built-ins. Overall length of 4-15/16 inches covers the bore pattern with a bit of overhang at each end, which helps when laying out multiple handles on wider drawer fronts. A projection of 1-1/8 inches spaces hands off the door face, creating room to grasp the pull comfortably in daily use.
This Berenson Andante pull uses a 3-3/4 inch center to center distance, which aligns with common 96mm drilling patterns often used in cabinet layouts. That spacing allows installers to use one bore setup across all doors and drawers where this pull is specified, helping reduce layout adjustments between metric and imperial references. With a 4-15/16 inch overall length, the pull extends beyond the mounting points, which is useful when centering the handle visually on fronts of varying widths. A projection of 1-1/8 inches sets the handle off the face enough for a full three-finger grip, which can improve comfort when operating heavier drawers or larger doors.
The Berenson Andante Series 7888-1AP-P pull, described as an Andante Pull 96mm CC Antique Pewter, fits work where a 3-3/4 inch center to center spacing is already standard or preferred. That dimension lines up well across a bank of cabinet doors and drawer fronts, helping maintain straight, uniform handle rows. With its zinc die cast construction, the pull suits installations in residential or shop cabinetry where metal hardware is expected to handle repeated opening cycles. The antique pewter finish supports projects aiming for a traditional or aged-metal look, which can complement wood tones or painted finishes without reflecting too much light. Because the width is 11/16 inch, this pull can sit comfortably on narrower rails, stiles, or small drawers without overwhelming the face.
The specified 3-3/4 inch center to center layout, described in tandem with the 96mm CC notation, ties imperial and metric references together, which is useful when using drilling equipment marked in either system. Installers can set jigs to 96mm spacing and know that aligns with the 3-3/4 inch requirement for this model. The 4-15/16 inch length offers clear reference points at each end of the pull, helping when aligning to panel edges or to midlines during installation. A projection of 1-1/8 inches defines how far the pull stands off the surface, so designers can account for this stand-off in tight spaces such as near adjacent walls or tall cabinet frames. The 11/16 inch width also informs layout on narrow members, supporting decisions on where this handle visually balances against rails and drawer heights. Identifying the pull by its manufacturer part number 7888-1AP-P gives a precise reference when repeating or expanding a job later.
The Berenson Andante cabinet pull uses a 3-3/4 inch center to center spacing, so mounting holes are placed that distance apart for consistent alignment across cabinets.
The 7888-1AP-P Andante Series antique pewter pull has an overall length of 4-15/16 inches, which covers the bore pattern and helps center the handle on doors and drawers.
This 96mm cabinet handle from Berenson is made from zinc die cast, providing a solid metal construction suitable for frequent cabinet door and drawer use.
The zinc die cast cabinet pull has a projection of 1-1/8 inches, spacing the grip off the cabinet face and creating room for fingers to grasp it comfortably.
This cabinet hardware pull has an antique pewter finish, giving it a subdued metal look that coordinates with other antique pewter decorative hardware.
This Berenson 3-3/4 inch cabinet handle is identified by manufacturer part number 7888-1AP-P, which specifies its Andante Collection design and antique pewter finish.
The Berenson Andante cabinet pull, with its 3-3/4 inch center to center layout and 4-15/16 inch length, provides a defined drilling pattern and coverage for cabinet fronts. Its zinc die cast body and antique pewter finish align with projects that call for metal hardware in a muted tone. When cabinet designs specify this center to center spacing and look, this 7888-1AP-P pull from Wurth Baer Supply offers a clearly documented option that ties dimensions, material, and finish into one part number.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | BQ3011-AP Mfr# 3011-1AP-P | Berenson Andante 5-1/16" (128 mm) Center to Center Antique Pewter Pull, 3011-1AP-P | ||||
Sold in: 1 Each | BQ3012-AP Mfr# 3012-1AP-P | Berenson Andante 2-1/2" (64 mm) Center to Center Antique Pewter Cup Pull, 3012-1AP-P | ||||
Sold in: 1 Each | BQ3009-DBZ Mfr# 3009-1DBZ-P | Berenson Andante 2-1/2" (64 mm) Center to Center Dull Bronze Cup Pull, 3009-1DBZ-P | ||||
Sold in: 1 Each | BQ7884-BPN Mfr# 7884-1BPN-P | Berenson Andante 2-1/2" (64 mm) Center to Center Brushed Nickel Cup Pull, 7884-1BPN-P | ||||
Sold in: 1 Each | BQ7891-BPN Mfr# 7891-1BPN-P | Berenson Andante Brushed Nickel 1-3/16" (30 mm) Diameter Knob, 7891-1BPN-P | ||||
Sold in: 1 Each | BQ7893-AP Mfr# 7893-1AP-P | Berenson Andante Antique Pewter 1-3/16" (30 mm) Diameter Knob, 7893-1AP-P |