Berenson Vibrato Series 3-3/4" (95 mm) Center to Center Verona Bronze Pull, - 7905-1VB-P
Description
Vibrato Pull 96mm CC Verona Bronze For Cabinets
Vibrato pull 96mm cc Verona bronze identifies this Berenson Vibrato Series cabinet pull as a 3-3/4 inch center to center handle, so it lines up with standard drilled holes on many cabinet doors and drawers in kitchen or shop builds. The zinc die cast material forms a solid pull body, which supports everyday opening and closing without the bulk of heavier metal in typical residential or light commercial cabinetry. The Verona Bronze finish defines the surface appearance, so this pull visually suits darker stains or warm-toned painted fronts where a bronze tone is preferred. The overall length of 5-3/16 inches extends the ends beyond the screw centers, giving fingers more room to grip along the bar on wider drawer fronts. A projection of 1-5/16 inches sets the standoff from the cabinet face, helping fingers clear edge profiles during use.
Practical Details Of This Berenson Vibrato Pull
- The 3-3/4 inch center to center dimension matches common boring patterns, so this pull works well when replacing handles on existing doors or drawers drilled at that standard spacing.
- The zinc die cast construction creates a consistent shape, which helps matching pulls line up visually across multiple cabinet faces in a run.
- The Verona Bronze finish defines a specific bronze tone, so the visible hardware coordinates with other Verona Bronze pieces in the same space.
- The 5-3/16 inch overall length sets the handle footprint on the front, which matters when covering previous outlines or aligning with rail widths.
- The 5/16 inch width keeps the pull profile slim, which is useful on narrower drawer fronts or small doors where larger bars would crowd the face.
- The 1/2 inch base dimensions fix the contact area at each mounting point, so the pull seats consistently against the cabinet surface.
Mounting And Fit Details For This Cabinet Pull
The 3-3/4 inch center to center measurement defines the screw hole spacing, which allows this pull to be mounted where holes are drilled at 96 mm or 3-3/4 inches apart on cabinet faces. The 1-5/16 inch projection determines how far the gripping surface stands off from the door or drawer, giving enough clearance for fingers while keeping the pull close to the face for a lower profile look. The 5/16 inch width describes the thickness across the bar, so installers can judge how this pull will sit visually on narrow or wide rails. The 1/2 inch base dimensions indicate the size of each mounting foot, which helps align the pull edges with door rails or stile lines during installation.
Using The Berenson Vibrato Pull In Cabinet Projects
Where This Vibrato Series Pull Fits Best
The Berenson Vibrato Series 3-3/4 inch center to center pull is part of a decorative handles and pulls category, so it is suited to cabinet doors and drawers where a defined style is needed. With a length of 5-3/16 inches, it spans more of the rail than a small knob, which can help on wider drawers that benefit from a longer grip area. The Verona Bronze finish ties this pull to other Verona Bronze hardware, so it fits well in rooms where that finish is used on multiple cabinet fronts. As a Berenson decorative hardware piece, it aligns with projects that specify Berenson Corporation products for consistent styling across an entire kitchen, bath, or built-in installation.
Details That Support Consistent Cabinet Results
The 3-3/4 inch center to center dimension provides a fixed drilling layout, which simplifies repeating the same hole spacing across banks of doors and drawers during layout. The 1-5/16 inch projection works with this spacing to create a consistent hand clearance, so each pull along a run feels similar when grasped. The 5/16 inch width and 1/2 inch base dimensions give predictable visual borders, helping installers line up edges with rails, stiles, or drawer fronts for clean sightlines. The zinc die cast construction maintains uniform shape from pull to pull, which supports straight, even lines when many units are installed on larger cabinet installations. The Verona Bronze finish remains the defining color, tying each piece together so banks of cabinets present a coordinated appearance using the same pull model.
Common Questions About This Verona Bronze Pull
What is the center to center size of this pull?
The Berenson Vibrato Series pull has a 3-3/4 inch center to center measurement, so it matches cabinets drilled at 96 mm spacing for straightforward alignment and replacement.
How long is the Berenson Vibrato Series pull overall?
The pull length is 5-3/16 inches, which sets how much of the drawer or door front the handle spans for grip and visual balance.
What material is this Verona bronze cabinet pull made from?
The Vibrato Series pull is made from zinc die cast, providing a formed metal body suited to typical cabinet door and drawer use.
What is the projection of this Berenson 7905-1VB-P pull?
The pull projects 1-5/16 inches from the cabinet face, giving finger clearance while keeping the handle close for a compact profile.
How wide is the Vibrato Verona bronze cabinet pull?
The pull has a width of 5/16 inch across the bar, which keeps the profile slim on narrower doors or drawer fronts.
What are the base dimensions on this cabinet handle?
Each base measures 1/2 inch, setting a defined contact area that helps position the pull consistently on cabinet fronts.
Selecting This Vibrato Pull For Cabinet Work
The Berenson Vibrato Series 3-3/4 inch center to center Verona Bronze pull combines zinc die cast construction, a 5-3/16 inch overall length, and a 1-5/16 inch projection, giving installers a defined size and finish for coordinated cabinet door and drawer projects.