Berenson Cadence Pull 96mm Center To Center Uses

Berenson Cadence pull 96mm center to center identifies a zinc die cast handle from the Cadence Collection in an antique silver finish, so you get a decorative hardware pull that matches that specific series and finish for consistent cabinet projects. The 3-3/4 inch center to center drilling, also expressed as 96mm, sets the mounting hole spacing, so you can align this pull with existing holes laid out on that standard size without altering your door or drawer fronts. A length of 4-1/32 inch defines the overall span of the pull, giving enough hand clearance across the front of typical cabinet doors and drawers while keeping the footprint compact on narrow faces. The 1-1/8 inch projection states how far the pull stands off the surface, providing finger room for a solid grip while limiting how far it extends into walkways or adjacent storage space. A 5/16 inch width keeps the pull visually light, which matters when coordinating multiple Cadence pieces across a run of cabinetry.

Key Cadence Antique Silver Pull Details

• The Cadence Collection designation ties this pull to a specific Berenson series, so matching handles and pulls can share the same design language on a full kitchen or built-in run.
• The antique silver finish defines the surface color and character, so you can coordinate this pull with hinges, knobs, and other decorative hardware using similar tones on the same installation.
• The zinc die cast material identifies a cast metal construction, so the pull provides a solid feel at the grip point where doors and drawers are operated repeatedly.
• The 3-3/4 inch (96mm) center to center dimension fixes the mounting hole distance, so layout on cabinet doors and drawers can follow that common drilling pattern during new work or straightforward replacements.
• The 4-1/32 inch overall length positions the grip area relative to the mounting points, helping you visualize how the pull will sit on rail and stile widths or drawer heads.
• The 1-1/8 inch projection and 5/16 inch width together define the pull profile, so you can anticipate clearance around adjacent doors, counters, or appliance panels on the job.

Cadence Pull Fit, Mounting, And Projection Use

The 3-3/4 inch center to center measurement guides where to drill or reuse mounting holes, so this Cadence pull suits cabinet doors and drawers laid out for that spread without reworking the front. The base size of 1/4 inch on each end describes how much area sits against the surface, which helps in planning edge distances from stiles or drawer side margins during layout. With a projection of 1-1/8 inch, the pull stands off far enough from the face to allow fingers behind the bar, supporting comfortable operation when hands are reaching at different angles. The 4-1/32 inch length defines how much of the drawer or door front is spanned visually and functionally, so you can align the pull proportionally on narrow bath doors or standard kitchen fronts. Being part of the Handles and Pulls category under decorative hardware and moldings positions this Cadence piece clearly as a functional handle on frequently used cabinet fronts.

Cadence Series Pull In Real Project Work

Where This Cadence Antique Silver Pull Fits

The Cadence Collection reference places this pull within Berenson decorative hardware, so it fits projects where a coordinated family of handles and pulls is planned across multiple cabinet locations. As a product in the Handles and Pulls, Berenson class and in the Decorative Hardware & Moldings category, it is oriented toward cabinet and furniture fronts where a metal handle is required for daily operation. The antique silver finish identifies a muted metallic tone, so the pull fits designs calling for a softer silver color across kitchens, baths, or built-in storage rather than a bright chrome look. With a center to center of 3-3/4 inch (96mm), the pull works on cabinet doors and drawers drilled to that common industry spacing, supporting both new layouts using that measurement and replacements on fronts already set to 96mm.

Why These Cadence Pull Details Reduce Rework

The specified 3-3/4 inch center to center dimension limits guesswork during layout, so installers can rely on that exact drilling distance to match jigs and templates already set up for 96mm hardware. The 4-1/32 inch overall length gives a predictable edge-to-edge footprint, helping align the pull on rails and stiles without crowding panel profiles or neighboring hardware. With a projection of 1-1/8 inch, the pull offers sufficient stand-off for fingers, which supports smoother door and drawer operation when fronts are flush with surrounding cabinetry. The base width of 1/4 inch at each mounting point indicates the contact area against the surface, helping plan how the pull meets door or drawer edges for a consistent appearance across a bank of fronts. Being manufactured by Berenson Corporation with part number 9704-199-P ties the pull to a specific specification, so matching additional pieces for ongoing work or future phases uses the same design, dimensions, and finish.

Common Questions About This Berenson Cadence Pull

Select This Cadence Pull For Defined 96mm Layouts

This Cadence pull from Berenson Corporation combines a 3-3/4 inch (96mm) center to center layout, 4-1/32 inch length, and 1-1/8 inch projection in an antique silver zinc die cast construction. When your cabinet plan or replacement work calls for that exact spacing and finish, this handle keeps drilling, alignment, and appearance consistent from one front to the next.