
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Hickory Hardware Metropolis pull describes this Belwith Keeler cabinet pull from the Metropolis collection, which provides a consistent look when matching other Metropolis handles across a project. The zinc die cast material creates a solid-feeling pull that supports everyday cabinet and drawer use. The satin nickel finish delivers a muted metallic surface that works well where a softer look than polished metal is preferred. The 3-3/4 inch (96 mm) center to center dimension sets fixed mounting hole spacing, which helps align multiple pulls in a straight, repeatable layout. The 5 inch overall length gives enough hand contact area for gripping, which helps on heavier cabinet doors or wide drawers. A projection of 1-1/8 inch sets the stand-off from the cabinet face, leaving finger clearance behind the pull. The 5/8 inch width defines the front face size, giving a slim profile that fits narrow rail sections.
The 3-3/4 inch (96 mm) center to center dimension establishes the exact distance between mounting holes, which lets drilling jigs or templates be set once and reused across a bank of cabinets. The 5 inch overall length means the pull extends slightly past the holes, which helps visually balance the handle on typical drawer fronts. A projection of 1-1/8 inch determines how far the gripping surface sits off the cabinet face, giving clearance for fingers to wrap behind the pull during opening and closing. The 5/8 inch width provides a slim contact face, which suits applications where stile or rail width is limited. The use of 8-32 x 1 inch screws matches a widely used cabinet thread and length, which aligns with common door and drawer construction dimensions in many shop-built and manufactured cabinets.
The 3-3/4 inch (96 mm) center to center layout makes this pull well suited to cabinets and drawers drilled on standard 96 mm spacing, supporting straightforward replacements or new installs on that pattern. The 5 inch overall length fits many base and wall cabinet doors without overpowering narrower fronts, which helps maintain proportion in smaller kitchen or bath layouts. The 1-1/8 inch projection keeps the pull far enough from the face for comfortable grip, which is useful on heavier drawers that need a firm handhold. The 5/8 inch width offers a streamlined look on both face frame and frameless cabinet styles where rail space can be tight. The satin nickel finish coordinates with other satin nickel decorative hardware, which supports a consistent appearance across hinges, latches, and additional pulls on the same job.
The precise 3-3/4 inch (96 mm) center to center measurement allows installers to use fixed drilling jigs, which helps maintain straight lines of pulls across long cabinet runs. The 5 inch total length gives a known edge-to-hole relationship, which simplifies positioning when aligning multiple pulls vertically on tall pantry doors. The 1-1/8 inch projection sets a uniform stand-off depth, which helps doors and drawers feel consistent to the hand from one cabinet to the next. The 5/8 inch width keeps the pull footprint narrow, which supports alignment on slim rails without overhanging edges. The zinc die cast material supports repeatable casting dimensions, which aids in keeping spacing and sight lines even when many pulls are installed side by side. The 8-32 x 1 inch screw size matches standard cabinet hardware threads, which coordinates with common shop drilling and tapping setups.
The Hickory Hardware Metropolis pull has a 3-3/4 inch (96 mm) center to center measurement, which sets the fixed distance between mounting holes for layout and drilling.
The PA0223-SN satin nickel pull has an overall length of 5 inches, which provides added grip area beyond the 3-3/4 inch mounting hole spacing.
This cabinet pull has a projection of 1-1/8 inch, which sets how far it stands off the cabinet face for finger clearance behind the handle.
The front face width of this cabinet pull is 5/8 inch, which gives it a slim profile suitable for narrower rails or smaller cabinet fronts.
This Metropolis pull is made from zinc die cast material with a satin nickel finish, combining a solid metal body with a smooth, muted metallic appearance.
The PA0223-SN pull uses 8-32 x 1 inch screws, aligning with common cabinet hardware threading and typical door and drawer thicknesses.
This Belwith Keeler Metropolis series pull combines a 3-3/4 inch (96 mm) center to center layout with a 5 inch overall length, which fits many cabinet doors and drawers on standard spacing. The zinc die cast construction and satin nickel finish provide a solid metal handle with a consistent appearance across multiple installations. The defined 1-1/8 inch projection and 5/8 inch width give predictable grip clearance and a slim profile suited to both small and large fronts. For projects built around 96 mm hole spacing and satin nickel hardware, this PA0223-SN pull offers a clearly specified option that aligns dimensions, finish, and mounting details.
Sold In: 1 Each