
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Wurth 15 gauge angled finish nail gives you a 2 inch long finishing brad built for detailed woodworking and finish carpentry tasks. The nail length supports secure fastening in typical trim and cabinet stock, which helps parts stay tight under normal use. The 15 gauge size provides a balance between holding power and a relatively small penetration profile, which reduces surface disruption on finished faces. This fastener is designed as an angled finishing brad, so it aligns with angled magazine finish tools, helping you reach into corners and tight areas. Sold in 4000 count quantities under part ES550OB, it supports longer production runs before restocking. The product sits in the Finish Nails fastener category, so it suits applications where a finished appearance matters on moldings, frames, and cabinetry.
This Wurth 15 gauge x 2 inch angled finishing brad nail is specified to fit several established finish nailer models. It fits Senco Finish br Pro 41XP, Finish br Pro 35, SFN30, SFN40, and SNI tools, so installers using these nailers can run this nail as part of their normal workflow. It also fits Porter Cable DA250B and similar models, which connects the fastener to another widely used nailer family. This defined fit allows crews using these tools to keep a single nail type on hand across multiple tasks, helping streamline stocking at the bench or on the service truck. Positioning within fasteners and finish nails also aligns it with nailers already configured for finishing brads on trim, frames, and cabinetry.
The ES550OB angled finishing brad nail is specified for vanities, so it supports fastening face frames, trim pieces, and small structural elements on bath cabinetry. It is listed for molding and trim, which covers casings, baseboards, crown profiles, and similar finish runs where discreet fasteners are important. Dowels and joints are named applications, meaning this nail can pin glued joints during assembly, helping hold components steady while adhesives cure. Cabinet door frames and drawer assembly are also called out, so it plays a role in building and repairing these everyday cabinet components. Picture frames, scribe moldings, furniture repair, carvings, and ornamentals round out the applications, showing that the nail is suited for small, precise fastening in detailed woodwork. Blind pinning of upholstered and trim panels is specified, so the fastener can secure panels from hidden faces. Rattan is also listed, indicating use in fastening this material in furniture or decorative work.
Because this fastener is a 15 gauge by 2 inch angled finishing brad nail, it combines a moderate shank size with enough length to grip both thin trims and thicker cabinet components, which supports consistent holding performance in the named applications. The angled form works with angled nailers listed in the fit details, so shots can be driven close to inside corners or along tight reveals, which helps place nails where they are structurally effective yet visually discreet. Its role in vanities, molding, trim, and cabinet door frames means the nail must sit cleanly in visible surfaces, supporting a finished look after filling or touch-up. Tasks like drawer assembly, dowels and joints, furniture repair, carvings, and ornamentals rely on controlled penetration, and the 2 inch length allows installers to tune depth for these components. For blind pinning of upholstered and trim panels and work with rattan, the 15 gauge format gives enough bite to hold flexible or layered materials against frames or substrates, which helps panels and woven elements stay aligned over time.
The ES550OB fastener is a Wurth 15 gauge by 2 inch long angled finishing brad nail, so it is intended for finish nailing tasks rather than framing or structural nailing.
These nails are specified for vanities, molding and trim, dowels and joints, cabinet door frames, drawer assembly, picture frames, scribe moldings, furniture repair, carvings, ornamentals, upholstered and trim panels, and rattan.
These nails fit Senco Finish br Pro 41XP, Finish br Pro 35, SFN30, SFN40, SNI, Porter Cable DA250B, and similar models, so crews using those tools can run this fastener.
The 2 inch length allows the nail to pass through typical trim or molding profiles into the substrate, which improves holding power without relying on oversized fasteners.
The 15 gauge size provides a solid shank for cabinet door frames, helping joints stay tight while still leaving a hole size suitable for normal finish touch-up.
These finish nails are listed for drawer assembly, so they can fasten sides, fronts, and backs to drawer components where a clean finished appearance is important.
The Wurth 15 gauge x 2 inch angled finishing brad nail ES550OB connects directly to trim, cabinet, furniture, and panel applications named in its description, so it aligns with common shop and onsite work. Its fit with Senco finish nailers such as Pro 41XP, Pro 35, SFN30, SFN40, SNI, and Porter Cable DA250B and similar models ties the fastener to established tools already used by many installers. For teams needing a consistent angled finish nail across vanities, molding and trim, dowels and joints, cabinet door frames, drawer assembly, picture frames, scribe moldings, furniture repair, carvings, ornamentals, upholstered and trim panels, and rattan, ES550OB provides a defined 15 gauge by 2 inch option.
Sold In: 1 Box
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Box | WWN15100E Mfr# ES525OB | Würth 15 Gauge x 1 in Long Angled Finishing Brad Nail, 4000/Box - ES525OB | ||||
Sold in: 1 Box | WWN15125E Mfr# ES532OB | Würth 15 Gauge x 1-1/4 in Long Angled Finishing Brad Nail, 4000/Box - ES532OB | ||||
Sold in: 1 Box | WWN15150E Mfr# ES538OB | Würth 15 Gauge x 1-1/2 in Long Angled Finishing Brad Nail, 4000/Box - ES538OB | ||||
Sold in: 1 Box | WWN15175E Mfr# ES545OB | Würth 15 Gauge x 1-3/4 in Long Angled Finishing Brad Nail, 4000/Box - ES545OB | ||||
Sold in: 1 Box | WWN15225E Mfr# ES557OB | Würth 15 Gauge x 2-1/4 in Long Angled Finishing Brad Nail, 4000/Box - ES557OB | ||||
Sold in: 1 Box | WWN15250E Mfr# N15250E | Würth 15 Gauge x 2-1/2 in Long Angled Finishing Brad Nail, 4000/Box - N15250E |