Wurth 20 gauge 3/8 inch staple describes a fine wire staple designed for detailed fastening where a light but secure hold is needed. The 3/8 inch leg length fastens thin stock such as casebacks, molding, upholstery layers, and dust covers without driving too deep, which supports clean results on lighter materials. The 1/2 inch crown spreads the holding force over a wider area, helping the staple grip sheet goods and fabrics without cutting through as easily. Being in the staples product class under fasteners positions this as a fastening solution specifically for woodworking and related shop work. The ES5010 manufacturer part number gives installers and buyers a precise reference for reordering or matching spec sheets on jobs that call out this staple pattern.
This staple is identified for use in tools such as Senco SFW10XP-F05, SFW10XP-F, DFP, and similar models, which ties the ES5010 pattern directly to common fine wire staplers in woodworking and upholstery shops. When a project specifies those staplers, using this staple pattern supports consistent driving depth and crown profile across the workpiece. The 20 gauge wire size pairs with that tool family, helping the legs form correctly in substrates typically used for casebacks, molding, upholstery, and dust covers. By relying on the ES5010 part number and listed tool fits, buyers can match fastener and stapler in a repeatable way across multiple jobs and locations.
The stated applications of casebacks, molding, upholstery, and dust covers define this ES5010 staple as a light-duty fastening solution for panel backing and trim in woodworking and related trades. On casebacks, the 3/8 inch leg length secures thin backing boards to cabinet or furniture frames, helping hold them flat without excessive penetration that could affect the other side. On molding, the fine 20 gauge wire fastens small trims where a slimmer staple profile supports less visible surface disruption before finishing. For upholstery, the 1/2 inch crown offers broader contact on fabrics, helping them stay tensioned along edges and corners. When used on dust covers, the same crown width helps hold light sheet material against frame members, supporting a continuous barrier on the underside of furniture or storage pieces.
The ES5010 manufacturer part number and SAP description "STAPLE,3/8"X20GA,1/2" CROWN,5M" tie all key dimensions into a single reference, which aids purchasers who repeat jobs that specify this staple format. The 20 gauge designation defines a wire size that works with tools like the Senco SFW10XP-F05, SFW10XP-F, DFP and similar staplers, supporting reliable driving and clinching performance in the listed applications. The 3/8 inch length and 1/2 inch crown combination shapes how the staple holds materials: the shorter leg helps protect thin back panels and fabrics, while the wider crown spreads the load along the surface. Sold in full box quantities only, this format supports shop workflows where a consistent fastener is used across multiple cabinets, furniture pieces, or upholstery runs without frequent part changes.
The ES5010 staples are listed for casebacks, molding, upholstery, and dust covers, so they serve light-duty fastening on backing panels, trim pieces, fabrics, and light sheet materials in woodworking and related work.
These staples fit Senco SFW10XP-F05, SFW10XP-F, DFP, and similar models, aligning with common fine wire staplers used in woodworking and upholstery shops for consistent driving.
The 3/8 inch leg length is suited to thinner materials like casebacks and dust covers, helping fasten them to frames without driving too deep into delicate panels or fabrics.
The 1/2 inch crown spreads holding force across a wider strip on the surface, which helps grip molding, upholstery, and dust covers more evenly and reduces the chance of tearing.
The ES5010 is classified under fasteners in the staples product class, identifying it as a dedicated stapling fastener for woodworking and similar shop applications.
ES5010 staples are sold in full box quantities only through Wurth Baer Supply, matching purchasing patterns for shops that consume staples regularly on production or installation jobs.
The Wurth 20 gauge x 1/2 inch crown x 3/8 inch length ES5010 staple gives buyers a clearly defined fastener for casebacks, molding, upholstery, and dust covers. With stated fit to Senco SFW10XP-F05, SFW10XP-F, DFP and similar models, it aligns with common shop staplers already in service. Sold in full box quantities only with discount available for full case orders, it supports production-focused purchasing. Select ES5010 when projects call for this specific combination of 20 gauge wire, 3/8 inch leg, and 1/2 inch crown across repeated woodworking or upholstery tasks.
Sold In: 1 Box