Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
96 x 4-3/32 crown moulding with 3/4 rope describes a maple wood molding that runs 96 inches in length and about 4-1/16 inches in width, so it spans long cabinet runs or wall sections with a single continuous profile. The moulding is made from maple, which matches maple cabinetry and trim work in kitchens, offices, or built-ins where a consistent wood species is important. This crown moulding is combined with a 3/4 inch rope moulding, creating a rope detail that adds visual depth along the lower portion of the crown. The rope detail is assembled with a top quality crown and a top quality rope moulding, so the decorative profile is already aligned and joined. The moulding is described as square, true and ready-to-finish, which supports clean fit-up against cabinet tops or walls and lets you apply your preferred finish on site.
This Omega National Products crown moulding is part of a wood moldings product class, so it is intended to be installed as decorative trim on cabinetry or casework. The 4-1/16 inch width creates a defined reveal from the cabinet face or wall surface up toward the ceiling, supporting standard crown installation layouts. Because the moulding is square and true, the edges are shaped to sit neatly where cabinet tops meet walls or soffits, helping installers align the profile without fighting twist or irregular faces. The 96 inch length gives installers enough material to run across typical cabinet banks, which can reduce cutting and joining compared to shorter sticks. Being ready-to-finish, the maple surface is prepared for staining or clear coating after fitting and fastening, aligning finishing workflow with other maple components on the job.
This Omega National Products crown moulding sits within decorative hardware and moldings, specifically crown moldings, so it is suited for upper cabinet tops, built-in units, and similar woodwork where a capped edge is required. The maple construction aligns with maple wood moldings, fitting projects that use maple doors, frames, or face frames, which helps maintain a uniform species throughout the installation. With its 4-1/16 inch width, the profile works above standard-height wall cabinets and tall pantry units, where the proportion of crown to cabinet height needs to remain visually balanced. The integrated 3/4 inch rope moulding detail adds an extra element to the face of the crown, which supports use on higher visibility runs such as kitchen focal walls, mantels, or office built-ins. Because the moulding is square and true, it sits well against straight cabinet runs and walls, supporting clean lines in finished millwork.
The combination of a top quality crown and a top quality rope moulding assembled as one piece removes the step of aligning a separate rope detail to the crown, which supports faster setups and repeatable joints across multiple cabinets. The 96 inch length allows long cuts that match common cabinet run dimensions, helping installers position scarf or coped joints away from high-visibility areas. The ready-to-finish maple surface ties directly into finishing schedules for other maple components, so stain or clear coat can be applied across doors, frames, and this crown in a coordinated sequence. The fact that the moulding is square, true and ready-to-finish means its faces are already prepared for final sanding and coating, supporting predictable results when finishing and fitting corners. The defined dimensions of 4-1/16 inches wide and 96 inches long provide clear planning data for layout, cutting lists, and waste calculations on cabinet or trim jobs.
This crown moulding is described as 4-1/16 inches wide and 96 inches long, which helps plan runs across cabinet tops or walls using clear length and face measurements.
The crown moulding is made from maple, so it aligns with maple cabinetry and woodwork where matching species supports consistent color and grain when finished.
This product is a crown moulding with 3/4 inch rope assembled, meaning a crown and a 3/4 inch rope moulding are combined as one finished profile.
Square, true and ready-to-finish indicates the maple moulding is straight, properly milled, and prepared for stain or clear coat application after installation trimming.
This moulding is manufactured by Omega National Products, which identifies the source brand for matching with their other wood moldings.
Manufacturer part MA04981MUF8 identifies this specific 96 inch by 4-1/16 inch maple crown moulding with 3/4 inch rope in the Omega National Products line.
This Omega National Products 96 inch by 4-1/16 inch maple crown moulding with 3/4 inch rope suits projects that call for maple wood moldings and an integrated rope profile. The square, true and ready-to-finish maple construction supports straightforward installation and finishing across cabinet and trim runs.
Sold In: 1 Each