Hickory Hardware Refined Rustic pull is a 3 inch center to center cabinet pull in a Black Iron finish that provides a coordinated grip point for doors or drawers, which lets you align multiple fronts with a consistent handle layout. The pull uses a zinc die cast construction that forms a solid, rigid handle body, which supports everyday cabinet use in kitchens, baths, or shop fixtures where frequent opening and closing happens. The Black Iron finish defines the visual tone of the pull, which helps match projects that call for darker decorative hardware on wood or painted surfaces. The 4-3/4 inch overall length spans slightly beyond the 3 inch mounting centers, which gives fingers more space to grab while keeping mounting holes at a standard spacing. The 1-1/4 inch projection sets how far the pull stands off the face, which affects clearance for fingertips during operation.
The 3 inch center to center measurement defines the distance between mounting points on this pull, which aligns with drill layouts that already use 3 inch spacing on replacement jobs or new cabinet runs. The pull is specified with a 4-3/4 inch overall length, which sets the visible footprint on the stile or drawer front during layout. A projection of 1-1/4 inch determines how far the pull extends from the cabinet face, which affects hand clearance and the feel when grasping from above or below. The 7/8 inch width defines the front dimension across the face of the pull, which influences placement near door edges or rails where available flat space matters. Screw size is listed as 8-32 x 1 inch, which describes the thread and length used to fasten the pull through typical cabinet fronts.
The P3001-BI Black Iron pull is part of the Refined Rustic collection, which aims at projects that call for a rustic-style decorative hardware line on cabinets or furniture. The 3 inch center to center dimension lets this pull sit on standard drilling layouts, which helps when matching existing 3 inch holes on replacement fronts. With an overall length of 4-3/4 inch, the pull presents a moderate span on doors and drawers, which suits both smaller cabinet faces and medium-width drawer fronts. The Black Iron finish defines a dark visual element on the cabinet surface, which supports design schemes where the hardware is meant to contrast with lighter woods or paints. Material is specified as zinc die cast, which forms a rigid pull body suitable for repeated opening motions in normal cabinet use zones. The 7/8 inch width focuses the visual mass of the handle, which keeps it proportional on face frames or frameless fronts where rail height may be limited.
The 3 inch center to center measurement provides a fixed drilling pattern, which simplifies laying out rows of pulls on multiple doors or drawers with consistent alignment. A projection of 1-1/4 inch establishes the stand-off distance from the front, which helps hands clear the surface without crowding nearby trim or adjacent fronts. The 4-3/4 inch overall length gives a predictable bar span, which aids in centering the pull on narrower doors while still leaving edge margins. The 7/8 inch width defines the visible band of hardware across the rail, which supports even spacing when coordinating with other Refined Rustic pieces on the same run. The Black Iron finish stays constant across units, which maintains a uniform appearance when installing many pulls in a kitchen, bath, or office bank of cabinets.
The Hickory Hardware Refined Rustic pull has a 3 inch center to center measurement, which sets the distance between mounting holes for cabinet doors or drawers.
The pull length is listed as 4-3/4 inch, which defines the total span of the handle across the cabinet surface.
The P3001-BI pull is made from zinc die cast, which creates a solid handle body for normal cabinet use.
The pull projection is 1-1/4 inch, which describes how far the grip extends off the cabinet face for finger clearance.
The handle has a Black Iron finish, which provides a dark appearance suited to rustic-style cabinet designs.
The mounting screw size is specified as 8-32 x 1 inch, which refers to the thread and length used to fasten the pull through the front.
The Hickory Hardware Refined Rustic pull with 3 inch center to center spacing, Black Iron finish, and 4-3/4 inch overall length offers a defined set of dimensions that support planned cabinet layouts. The zinc die cast construction and 1-1/4 inch projection give this pull a practical grip profile for day-to-day operation. For projects needing a dark, rustic-style handle with a standard 3 inch drilling pattern, the P3001-BI pull from Wurth Baer Supply provides a clearly specified option ready to match that requirement.
Sold In: 1 Each
