Berenson Toccata Series 6 Inch Pull Use

Berenson Toccata Series 6 inch pull gives you a defined 6 inch center to center grip that works well when you want consistent handle spacing across multiple cabinet doors or drawers. The Verona Bronze finish provides a specific bronze look that helps coordinate with other Verona Bronze decorative hardware on the job. Material listed as zinc die cast means the pull body is cast from zinc, which creates a solid metal feel that installers can drive screws into confidently. The overall length of 7-13/16 inches lets this pull extend slightly past the drilled centers, giving users more leverage when pulling heavier drawers. A projection of 1-11/16 inches holds the hand away from the cabinet face, which helps reduce knuckle contact on thicker door profiles. The 9/16 inch width provides a slim front view while still presenting enough surface for a comfortable fingertip grip during everyday use.

Key Toccata Verona Bronze Pull Details

• The 6 inch center to center drilling lets you lay out handle locations on a straight 6 inch pattern, simplifying repeat drilling across a full run of cabinets and supporting quick layout using standard 6 inch templates.
• The 7-13/16 inch overall length allows the pull ends to visually frame the 6 inch hole spacing, which helps align the hardware visually with door and drawer proportions while maintaining comfortable hand placement.
• The 1-11/16 inch projection keeps the gripping surface away from the cabinet face, giving fingers room behind the pull so doors and drawers can be operated comfortably even on thicker fronts.
• The 9/16 inch width presents a slim profile, so the pull adds function without looking bulky, which matters when lining up several pulls on modern, clean-face cabinet designs.
• The 5/8 inch base diameter at each mounting point creates a defined footprint on the door or drawer, helping the pull visually cover the drilled area around each fastener location.
• The Verona Bronze finish on this Toccata Series pull provides a coordinated bronze color, which lets you match this handle with other Verona Bronze components in the same space.

Mounting And Fit Details For This Pull

The 6 inch center to center measurement defines exactly where the mounting holes land, so you can set up jigs or drilling guides for 6 inch spacing and repeat that measurement across all cabinet fronts. The base diameter of 5/8 inch tells you how much area around each mounting point is covered by the pull, which is useful when working over existing holes or when you want predictable reveal around the hardware. A projection of 1-11/16 inches means the pull stands off from the cabinet face by that amount, providing enough clearance for gripping from above, below, or straight on. The overall length of 7-13/16 inches gives you the total space the pull occupies on the face, helping you position it correctly relative to door rails, stiles, and drawer edges.

Using This 8238-1VB-P Pull In Projects

Where The Berenson Toccata Pull Works Best

The Berenson Corporation Toccata Series pull in Verona Bronze belongs to the Handles and Pulls product class, so it is suited for cabinet and furniture applications where a standard handle is required. The 6 inch center to center layout fits projects designed around that drilling pattern, which is common on wider drawers and doors needing a longer handhold. Its 7-13/16 inch overall length allows the pull to sit comfortably on medium to large cabinet fronts without looking undersized. The 9/16 inch width works well on both face-frame and frameless installations where a slimmer pull is preferred. Because the pull is specified as zinc die cast, it is appropriate anywhere a metal decorative pull is desired within woodworking and cabinetry work.

Why These Toccata Dimensions Support Consistent Results

The precise 6 inch center to center dimension lets installers standardize layouts, reducing measurement variation from cabinet to cabinet. With a known projection of 1-11/16 inches, the pull offers consistent clearance behind the gripping area, which helps doors and drawers operate the same way across an entire kitchen or bank of cabinets. The 5/8 inch base diameter defines the contact circle at each mounting point, giving a predictable bearing surface against the door or drawer face. This matters when aligning multiple pulls along a rail, because each base reads as a consistent visual marker. The 7-13/16 inch overall length and 9/16 inch width create a repeatable footprint that can be mirrored left-to-right and top-to-bottom, helping maintain straight visual lines through long cabinet runs. The specific Verona Bronze finish keeps color and sheen consistent whenever the same pull is used throughout a room.

Common Questions About This Verona Bronze Pull

Selecting This Toccata Pull For Your Job

The Berenson Toccata Series 6 inch pull in Verona Bronze combines a 6 inch center to center drilling, 7-13/16 inch overall length, and 1-11/16 inch projection to support consistent cabinet layouts. Specifying this zinc die cast pull with its defined 5/8 inch base diameter and 9/16 inch width lets you plan hole spacing, clearances, and alignment precisely on doors and drawers. For projects built around Verona Bronze decorative hardware, using this 8238-1VB-P handle ties fit, color, and dimensions together across the installation.