Berenson Forte Series 6" (152 mm) Center to Center Weathered Nickel Pull, - 8270-1WN-P

Berenson Forte 6 Inch Pull For Cabinets

Berenson Forte 6 inch pull is a zinc die cast cabinet handle designed for projects that call for a 6 inch center to center mounting. The Forte Series design defines this pull as part of a coordinated decorative hardware collection, which helps maintain visual consistency across a run of doors and drawers. Its weathered nickel finish provides a distinct surface appearance, which supports design choices that lean toward a worn or aged metal look on cabinetry. The 6-5/8 inch overall length means the grip extends beyond the 6 inch mounting span, which gives fingers room to grab the pull comfortably in typical cabinet layouts. A base diameter of 9/16 inch at each end concentrates the contact area at the door or drawer face, which supports stable seating against the surface during installation and daily use.

Key Details That Shape Everyday Cabinet Use

• The zinc die cast material defines the body of this pull, which creates a solid-feeling handle for routine cabinet opening and closing in kitchen, bath, or shop environments.
• The weathered nickel finish sets the surface tone, which helps this pull coordinate with other weathered nickel decorative hardware on adjoining doors and drawer fronts.
• The 6 inch center to center dimension fixes the drilling layout, which allows straightforward alignment on doors or drawers already bored for this standard spacing.
• The 6-5/8 inch overall length extends slightly beyond the mounting span, which offers additional gripping length for hands when pulling wider or heavier fronts.
• The 9/16 inch base diameter defines the footprint at each end, which spreads contact across the cabinet face for secure seating once the pull is fastened.
• The 8-32 x 1 screw size specification identifies the thread and length, which aligns this pull with common cabinet door and drawer mounting practices.

Mounting Dimensions For Straightforward Alignment

The 6 inch center to center measurement sets the exact distance between mounting holes, which simplifies layout when drilling new fronts or matching existing 6 inch patterns. The 6-5/8 inch overall length gives a clear visual reference beyond the mounting span, which supports even reveals when aligning multiple pulls across upper and lower cabinets. The 9/16 inch base diameter controls how much of the pull contacts the door or drawer surface, which helps the ends sit flush and tidy against flat cabinet faces. The specified 8-32 x 1 screw size defines the thread and nominal length used for attachment, which ties this pull into typical cabinet construction thicknesses that accept this screw format.

Using This Forte Series Pull In Cabinet Projects

Weathered Nickel Forte Pull In Cabinet Runs

This Forte Series 6 inch center to center cabinet pull locates its mounting posts exactly 6 inches apart, which suits cabinets drilled on that spacing throughout a kitchen or bath run. The 6-5/8 inch total length carries the weathered nickel finish across a slightly longer bar, which visually bridges wider drawer fronts or tall doors with a continuous handle line. Its 11/16 inch width creates a defined gripping surface along the bar, which supports a consistent hand feel as doors and drawers are opened from different angles. The 9/16 inch base diameter at each end keeps the transition from pull to door compact, which works well on narrow frame sections or slab fronts where space around the mounting area is limited.

Details That Support Repeatable Mounting Results

The defined 6 inch center to center dimension gives installers a fixed drilling template, which supports repeatable hole placement across multiple fronts on a job. The 8-32 x 1 screw size specification ties the pull to a widely used cabinet thread standard, which streamlines tool setup when driving the same screw type through consecutive doors and drawers. The 6-5/8 inch overall length acts as a visual guide during layout, which helps align pulls parallel to door edges or drawer tops for consistent sight lines. The 11/16 inch width keeps the bar proportionate to typical face frame and panel dimensions, which helps maintain balanced spacing between the handle and nearby edges. Together, these measured details define a predictable interface between the Forte Series pull and the cabinet faces it is mounted on, which supports efficient installation and uniform results across a project.

Common Questions About This Berenson Forte Pull

Selecting This Pull For Weathered Nickel Projects

The Berenson Forte 6 inch pull combines a 6 inch center to center mounting layout with a weathered nickel finish, which aligns functional drilling requirements with a defined visual style. Its zinc die cast construction, 6-5/8 inch overall length, 11/16 inch width, and 9/16 inch base diameter create a predictable footprint on cabinet faces, which helps plan consistent spacing and alignment across multiple fronts. For projects built around weathered nickel decorative hardware, these dimensions and finish details position this Forte Series pull as a practical option when a 6 inch center to center handle is required.