Berenson Forte Series 4" (102 mm) Center to Center Weathered Nickel Pull, - 8276-1WN-P

Berenson Forte 4 Inch Pull For Cabinets

Berenson Forte 4 inch pull is a zinc die cast cabinet handle from the Forte collection in a weathered nickel finish, so it provides a consistent look for cabinets where this specific style and size are required. The 4 inch center to center drilling matches many common cabinet layouts, which helps align the pull with existing hole patterns on doors and drawers. Overall length of 4-3/8 inches gives a little overhang past the mounting holes, which provides comfortable gripping area at each end during daily use. A projection of 1-1/4 inches spaces the hand away from the cabinet face, which helps fingers clear door and drawer fronts when opening. Width of 1/2 inch creates a slim profile across the front, which keeps the pull from crowding narrow rail or stile sections on cabinet doors. The Berenson 8276-1WN-P part number identifies this exact Forte Series cabinet pull for repeat ordering.

Forte Series Pull Details That Help Installers

• The zinc die cast material forms a solid pull body, which supports routine cabinet door and drawer use in kitchens, baths, or similar interior spaces without adding excessive weight to the front.
• The weathered nickel finish provides a muted metal appearance, which coordinates with other weathered nickel decorative hardware in the same area for a unified installation.
• The 4 inch center to center dimension sets the hole spacing, which lets installers match drilling patterns across multiple fronts for consistent alignment along cabinet runs.
• The 4-3/8 inch overall length defines the edge-to-edge footprint, which helps lay out pulls so they fit cleanly between panel details or adjacent doors.
• The 1-1/4 inch projection creates stand-off from the cabinet face, which gives fingers usable clearance behind the pull while still keeping the handle close to the door surface.
• The 1/2 inch width keeps the pull relatively slim, which suits narrower rails and avoids interfering with nearby hardware on compact fronts.
• The 8-32 x 1 inch screw size specification sets the thread and length, which supports matching to typical cabinet door and drawer front thicknesses drilled for this thread standard.

Mounting Dimensions For Accurate Pull Placement

The 4 inch center to center measurement defines the mounting hole distance, which lets installers drill consistent, repeatable holes across a bank of cabinets. With overall length at 4-3/8 inches, layout work can reference both mounting points and full handle span, which is useful when positioning near panel edges or adjacent hardware. A 1-1/4 inch projection gives installers a known stand-off, which helps align this pull with neighboring hardware pieces that share similar projection. The 3/8 inch base diameter sets the footprint where the pull meets the door or drawer front, which matters when positioning on narrow frames or next to decorative profiles.

Using This Weathered Nickel Pull In Projects

Where The Berenson Forte 4 Inch Pull Fits

This Berenson Forte Series 4 inch center to center pull fits cabinet doors and drawers that are drilled on a 4 inch spread, which is a common layout on many residential and light commercial cabinets. The weathered nickel finish ties into installations using other weathered nickel decorative hardware, which helps maintain continuity across a full kitchen, bath, or built-in project. Its 4-3/8 inch overall length suits medium-width fronts, which gives enough handle presence without dominating smaller doors. The 1/2 inch width lets the pull sit comfortably on face frames or slab fronts, which is useful on cabinets where rail or stile dimensions are limited.

Why These Forte Pull Details Support Consistency

The defined 4 inch center to center spacing means installers can rely on standard drilling jigs, which speeds layout work and helps keep handles aligned along long cabinet runs. Zinc die cast construction gives the pull a uniform shape and surface, which supports consistent appearance from one handle to the next across multi-piece installations. The 1-1/4 inch projection and 3/8 inch base diameter provide fixed stand-off and contact area, which help maintain an even visual reveal and finger clearance on every cabinet. The 8-32 x 1 inch screw size specification lets shops and installers match drilling and thread selection, which reduces rework when preparing doors and drawers for this hardware. The Berenson 8276-1WN-P identifier ties all these dimensions and finish details to a single part, which simplifies reordering for future phases or service work.

Installer Questions About This Berenson Forte Pull

Selecting This Forte Pull For Matching Installs

This Forte Series 4 inch center to center weathered nickel pull from Berenson Corporation combines a 4-3/8 inch overall length, 1-1/4 inch projection, and zinc die cast construction, giving you defined dimensions for consistent cabinet layouts. When a project calls for weathered nickel hardware on a 4 inch spread, using the Berenson 8276-1WN-P part keeps your drilling, alignment, and finish coordinated across doors and drawers.