Berenson Toccata Series Oil Rubbed Bronze 18" (457 mm) Center to Center Appliance Pull, -8293-1ORB-P
Description
Berenson Toccata Appliance Pull For Appliances
Berenson Toccata appliance pull is a zinc die cast handle in the Toccata Series, so it gives a consistent look when matching other pulls from the same collection. The oil rubbed bronze finish provides a dark, traditional tone that works well on appliance panels needing a warmer metal color. With a center to center measurement of 18 inches, this pull aligns with long appliance panel drilling for a clean, straight installation. The overall length of 19-13/16 inches gives extra grip area beyond the mounting points, which helps when opening heavier appliance doors. A projection of 2-5/16 inches sets the grip away from the panel, creating space for fingers and reducing contact with the door surface. The 7/8 inch width offers a substantial handhold without crowding adjacent fronts.
Key Toccata Series Appliance Pull Details
- The zinc die cast material provides a solid, consistent base, which supports repeatable performance across multiple installations in a project using the same pull.
- The oil rubbed bronze finish gives a darker appearance, which helps align the pull with traditional or transitional appliance panel designs.
- The 18 inch center to center dimension matches long appliance drilling layouts, which supports accurate handle placement on tall or wide fronts.
- The 19-13/16 inch overall length extends slightly beyond the mounting span, which offers more gripping surface for opening and closing heavier units.
- The 2-5/16 inch projection holds the pull off the surface, which provides room for a full hand grip and helps reduce knuckle contact with the panel face.
- The 7/8 inch width and 7/8 inch base dimensions keep the pull visually balanced, which supports a uniform look across doors and drawer fronts.
Mounting And Fit Details For This Pull
This 18 inch center to center pull is designed around a long mounting span, so it suits appliance panels where the handle needs to bridge a wider distance. The 19-13/16 inch overall length defines the end-to-end footprint on the front, which helps in planning clearances near panel edges or adjacent doors. A projection of 2-5/16 inches fixes how far the handle stands off, which is useful when aligning it with surrounding cabinet pulls for a level, consistent grab depth. The 7/8 inch width and matching base dimensions set the bearing area against the panel, which matters when laying out the pull on narrower stiles or rails. The zinc die cast construction supports a stable thread interface for mounting, which is important when fastening through thicker appliance panels.
Using This 18 Inch Pull In Appliance Projects
Where This Oil Rubbed Bronze Pull Fits Best
This appliance pull belongs to the Toccata Series, so it fits projects that already use Toccata cabinet hardware and need an 18 inch center to center handle for panel-ready appliances. The oil rubbed bronze finish supports designs calling for a darker, more traditional metal tone on refrigerator or dishwasher panels. With a length of 19-13/16 inches and 7/8 inch width, the pull works well on full-height doors where a longer handle balances the scale of the panel. The 2-5/16 inch projection helps when appliances sit near deep counter overhangs, because the stand-off distance defines the grip space available between the handle and adjacent surfaces. The matching 7/8 inch base dimensions keep both ends of the pull proportionate, which is useful when lining it up with stiles or decorative trim.
Details That Support Consistent Mounting Results
The 18 inch center to center spacing gives a clear drilling layout, which simplifies repeating the same hole pattern across multiple appliance panels. The zinc die cast material creates a uniform body, which supports consistent seating of the bases against the door surface once tightened. A 2-5/16 inch projection sets a fixed grab depth, which helps installers align this pull with other handles that share similar stand-off dimensions. The 7/8 inch width provides a stable gripping face, which is helpful for users pulling heavier appliance doors open throughout daily use. Base dimensions of 7/8 inch define the contact area at each end, which matters when checking that the pull lands fully on flat portions of the panel. The specified 10-24 x 3/4 inch screw size defines the thread type at the pull, which is important when matching the mounting fastener to panel thickness requirements.
Common Questions About This Toccata Appliance Pull
What is the center to center size of this pull?
This Toccata Series appliance pull has an 18 inch center to center dimension, which sets the exact drilling distance between mounting holes on the appliance panel.
How long is the Berenson Toccata appliance pull overall?
The Berenson Toccata appliance pull has a 19-13/16 inch overall length, which defines the end-to-end footprint on the door or drawer front.
What material is this 18 inch appliance pull made from?
This 18 inch center to center pull is made from zinc die cast, which provides a uniform metal body for the handle and mounting threads.
What finish does the 8293-1ORB-P appliance pull have?
The 8293-1ORB-P appliance pull has an oil rubbed bronze finish, which gives the handle a darker look for traditional-style appliance fronts.
How far does this Toccata Series pull project from the panel?
This Toccata Series appliance pull has a projection of 2-5/16 inches, which defines how far the grip stands off from the appliance panel surface.
What screw size does this appliance pull use?
This appliance pull is specified with 10-24 x 3/4 inch screws, which sets the thread size and basic length used for fastening through the panel.
Selecting This Pull For Appliance Panels
The Berenson Toccata appliance pull in oil rubbed bronze combines an 18 inch center to center span with a 19-13/16 inch overall length, so it suits full-size appliance fronts needing a long handle. Zinc die cast construction and 7/8 inch base dimensions establish a solid mounting footprint on the panel. A 2-5/16 inch projection and 7/8 inch width define a comfortable, consistent grip. With part number 8293-1ORB-P, this pull aligns with Toccata Series hardware layouts across a project.