Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Würth #10 x 1-inch pan head hinge and drawer slide installation screw is a dedicated mounting fastener for attaching European cup hinges, side-mount drawer slides, and similar cabinet hardware to interior cabinet panels. The 1-inch length is sized for typical 3/4-inch sheet goods, giving full thread engagement through the hardware mounting plate and into the panel without over-penetrating.
At 1 inch, this screw threads through a standard hinge mounting plate or drawer slide bracket and drives into 3/4-inch cabinet-side material with enough engagement to hold the hardware securely through daily cycling. It is long enough to seat fully without wobble but short enough to stop well clear of the panel face on a standard 3/4-inch side. That makes it the practical choice when the hardware is going directly into a panel rather than into a face-frame rail, where a longer screw would typically be specified. For frameless cabinetry and hardware mounted to panel surfaces, the 1-inch length covers the most common install scenario.
The nickel finish coordinates visually with the satin and brushed-metal tones of most European hinge bodies and drawer slide brackets, so the fastener does not stand out inside a finished cabinet box. The pan head profile sits flat on the bearing surface of the mounting plate rather than trying to countersink, which is the correct head type for hardware installation: countersunk heads would wedge into the hardware hole instead of clamping it down. Coarse thread on a #10 gauge gives good pull-out resistance in the engineered panel materials that make up the majority of cabinet boxes.
Cabinet shops installing European concealed hinges and side-mount drawer slides through this length range will find this screw covers the standard case. It is equally at home on a production line driving hundreds of hinges a day and in a smaller shop or field install where the crew needs a reliable, identifiable hardware screw ready to go. The box quantity of 1000 suits both settings. Because the screw is positioned as a hardware mounting fastener rather than a structural or joinery screw, it belongs in the drawer next to the hinge boxes and slide cartons, not in the general fastener bin.
Yes. Hinge mounting plates use flat-bearing holes sized for a pan head, which clamps the plate against the cabinet surface. A countersunk head would wedge into the hole rather than bearing on the plate face.
A 1-inch screw passes through a typical hinge or slide mounting plate and threads into 3/4-inch panel material with solid engagement, stopping well short of the panel face. Shorter screws may not achieve full thread engagement; longer screws risk breaking through on thinner or routed panels.
The coarse thread and sharp point are suited to the panel materials most cabinet boxes are built from, including plywood, particleboard, and MDF. For very dense hardwood panels, a pilot hole is recommended to ease driving.
Most European hinge mounting plates and standard drawer slide brackets use holes sized for a #6 or #8 screw. Confirm the mounting hole diameter on your specific hardware before ordering a #10 gauge. This screw is well suited to hardware with larger mounting holes or applications where added holding diameter is specified.
A standard #2 Phillips bit. No specialty bit is needed.
With 1000 screws per box and a length matched to standard 3/4-inch cabinet panels, this Würth hardware installation screw keeps hinge and drawer slide work moving without hunting for the right fastener mid-job.
Sold In: 1000 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 10 Each |  WW614176461 Mfr# 0614176461005 10 | #2 x 1" Phillips Drive Insert Bit (10/Bag) |