Würth #7 x 1" Bugle Head Drywall Screw Phillips Drive - Sharp Point Coarse Thread Black, 367000026296110000 - 10000/Box

Bugle Head Drywall Screw For Reliable Fastening

Bugle head drywall screw in a #7 x 1 inch size gives installers a familiar drywall fastener format that bites securely while keeping head size predictable across a job. The fully threaded shank engages material along the full screw length, so the load is carried by the entire fastener, which helps distribute holding power across more fibers in typical drywall and wood framing substrates. Case hardened construction provides a hardened outer surface, which supports driving into standard framing or wood-based materials with reduced head damage under a properly set driver. The black finish clearly identifies this drywall screw style on site, simplifying bin organization when sorting different screw types. A sharp point starts into material without preformed threads in common drywall applications, which supports steady workflow when moving quickly across multiple board positions.

Key Drywall Screw Details That Support Work

• The #7 x 1 inch size defines both gauge and length, giving consistent depth of penetration relative to drywall thickness and typical backing, which matters when balancing grip with controlled breakthrough on interior fastening jobs.
• Bugle head geometry spreads the head bearing area against the drywall face, so the screw can seat consistently into the surface, which supports a smoother plane for later finishing operations across the installed board run.
• Fully threaded design means threads run from tip to near the head, engaging material along the full embedded length, which helps maintain pull-out resistance wherever the screw is driven within its standard working depth.
• Case hardened construction provides a hardened surface layer on the screw body, supporting drive torque transmission from the bit to the screw, which helps limit cam-out and head deformation during routine powered installation.
• The black finish creates a clear visual cue on fastener type and style in storage and on site, which simplifies separating drywall screws from other fasteners during staging, loading, and daily installation work.
• The coarse thread pattern matches the coarse thread description in the product data, giving an aggressive bite into common backing materials, which supports fast driving and firm seating during repetitive drywall fastening.

Installation-Oriented Details For Drywall Fastening

The Phillips drive configuration on this drywall screw is designed for use with #2 Phillips drive bits, so installers can work with a widely used bit size across most powered drivers. A sharp point at the tip engages standard drywall and common backing materials by cutting into the surface as rotation begins, which supports starting each screw without pre-tapped threads in normal drywall work. Because the screw is fully threaded, engagement begins early and continues up the shank, which gives steady pull as the fastener draws the drywall against the substrate. The black finish on the screw body provides clear contrast against light-colored drywall sheets, helping installers visually confirm drive depth and spacing during installation passes along studs or other framing.

Drywall Screw Performance In Real Job Conditions

Where This Wurth Drywall Screw Is Used

This Wurth #7 x 1 inch bugle head drywall screw is described as a drywall screw, so it is suited to fastening drywall sheets to suitable backing where a #7 gauge and 1 inch length match the required penetration. The coarse thread described in the product data gives this screw a thread form intended to bite into typical backing materials for drywall, such as common framing members or similar substrates, where coarse threading helps the screw pull down quickly. Because the screw is fully threaded, the threads grip all along the embedment depth in the backing, which helps the sheet stay tight to the substrate once the head is seated. The black screw body stands out against standard drywall board color, allowing crews to visually scan for screw rows when planning follow-up finishing steps over installed panels.

How Screw Design Supports Consistent Results

The bugle head design described in the product data creates a broader bearing surface at the head, supporting a controlled seating profile into the face of the drywall, which matters when aiming for a surface ready for finishing compound. The Phillips drive style, specified for #2 Phillips drive bits, allows the driver bit to sit into the head recess in a familiar cross-shaped pattern that transfers torque to the screw, supporting predictable driving behavior with common drill drivers. Case hardened construction provides a hardened outer surface on the screw, which helps the head and drive recess resist rounding under normal installation torque, supporting repeated, consistent seating without frequent bit slippage. The sharp point described in the data lets the screw bite into drywall and backing as rotation begins, so each placement can start quickly at marked locations, helping crews move systematically across studs or other supports with minimal repositioning.

Questions About This Wurth Drywall Screw

Selecting This Drywall Screw For Your Next Job

This Wurth #7 x 1 inch bugle head drywall screw combines a fully threaded, case hardened body with a coarse thread and sharp point, giving tradespeople a drywall screw format tuned for engaging suitable backing while seating cleanly into board faces. The Phillips drive that uses #2 Phillips drive bits aligns with standard driver setups already used on many sites, which supports straightforward adoption into existing workflows. The black finish helps keep this screw visually distinct during setup and installation, offering a drywall-specific fastener option ready for repetitive fastening along framing members.