Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Würth #6 x 1-1/4" Face Frame and Pocket-Hole Screw pairs a fine thread with a pan head, Type 17 Auger point, and #2 Phillips drive in a Black finish. It is sized for 3/4-inch hardwood face frame stock, where fine-thread engagement prevents splitting and delivers the holding power tight-grained species demand.
Coarse-thread pocket-hole screws are the right call for pine, poplar, and plywood. Switch to fine thread when the face frame is maple, oak, cherry, or another tight-grained hardwood. The closer thread spacing puts more thread surface in contact with dense wood fibers, which translates to stronger pull-out resistance and a joint that stays tight through seasonal movement. The 1-1/4-inch length is the standard match for 3/4-inch face-frame stock driven at the 15-degree pocket angle — the threaded section reaches the mating member without over-penetrating.
The pan head sits flat against the pocket face, spreading the clamping load evenly across the joint rather than acting as a wedge. That geometry is what makes a pan or washer head the right choice for face-frame work: the head pulls the pieces together rather than trying to push through them. The Type 17 Auger point adds a longitudinal flute that clears chips at the tip, so the screw bites in one smooth motion instead of stalling against dense grain. The Black finish is a functional detail in hardwood cabinet shops — it disappears inside dark stained or painted interiors and against black pocket-hole jig guides, keeping the finished cabinet surface clean.
This screw is at home on a production line building face-frame cabinets in maple or oak. Cabinet makers who cut their own face frames, finish carpenters joining hardwood rails to stiles on site, and custom shops that run a mix of species all reach for a fine-thread pan-head screw when the hardwood goes into the jig. The 10,000-piece box supports uninterrupted production without reordering mid-run. Because the Phillips drive is universal, the same driver bit services pocket-hole joints, hinge plates, and drawer-slide hardware without a changeover.
Fine thread is designed for hardwood face frames. The tighter thread pitch puts more thread surface in contact with dense wood fibers like maple and oak, improving pull-out resistance and reducing the risk of splitting that a coarse thread can cause in tight-grained species.
This screw is optimized for hardwood. For softwood, pine, poplar, or plywood face frames, a coarse-thread version of the same screw is the better fit. Fine thread in low-density materials does not grip as effectively as coarse.
Yes. The pan head bears flat against the angled pocket wall, distributing clamping force across the joint face. It does not countersink or wedge into the wood, which is the correct head behavior for face-frame pocket-hole joinery.
It uses a #2 Phillips bit, which is standard equipment on most cordless drills and pocket-hole jigs.
The Black finish reduces visual contrast inside dark cabinet interiors and blends with black pocket-hole jig guides, so it has a practical role beyond appearance. It is not a corrosion-protection coating rated for exterior use. This screw is for interior cabinet and millwork applications.
When the face frame is hardwood and the joint needs to hold, this fine-thread pan-head screw provides the thread engagement, head geometry, and point design to do the job right — box after box.
Sold In: 10000 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  WW90260 Mfr# 0614176143961 1 | #2 x 6" Square Drive Insert Bit, 2 Piece Bit | ||||
Sold in: 1000 Each |  WW10200 Mfr# 3670000036961 1000 | Würth #6 x 1-1/4" Pan Head Face Frame and Pocket-Hole Screw Phillips Drive - Type 17 Auger Point Fine Thread Black, 3670000036961 1000 - 1000/Box |