Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Würth #7 x 1-1/4" face frame and pocket-hole screw is a coarse-thread pan head fastener designed for pocket-hole joinery in softwood, pine, poplar, and similar materials. At 1-1/4 inches, it is the standard length for pulling 3/4-inch stock tight at a pocket-hole joint, making it a natural fit for cabinet face frame construction, box assembly, and furniture joinery in softer species.
The 1-1/4-inch length is the accepted standard for pocket-hole joinery in 3/4-inch workpieces. It provides enough thread penetration into the mating member to create a strong pull without bottoming out or breaking through the far face. This is the length cabinet shops reach for when building face frames from rails and stiles, attaching a face frame to a cabinet box, or assembling drawer boxes from 3/4-inch sheet goods. When the material is softwood, poplar, or secondary hardwood, the coarse thread on this screw engages quickly and holds firmly without requiring a pilot hole beyond the pocket itself.
The pan head profile distributes clamping load across the pocket wall rather than concentrating it at a narrow bearing edge. This matters in face frame work where the pocket is often drilled close to the end grain of a rail or stile — a wider bearing surface reduces the chance of the head pulling through or distorting the joint. The Type 17 Auger point features a longitudinal flute that clears chips ahead of the thread, lowering the torque needed to seat the screw fully. The #2 square drive is designed so the screw stays on the bit during placement at the awkward angles pocket-hole jigs often create — a useful characteristic when the bit is correctly sized for the recess.
Cabinet shops building painted face frames from poplar or pine, furniture manufacturers working through high volumes of 3/4-inch material, and millwork operations joining softwood components all share the same need: a screw that drives consistently and doesn't require adjustment between pieces. The black finish is an added detail that keeps installed screws from standing out in painted white or dark cabinet interiors. At 7,500 per box, restocking interruptions are minimal during production runs. This screw is for indoor work in dry environments — the black finish is not a corrosion-resistant coating for exterior or high-humidity applications.
Yes. For pocket-hole joints in 3/4-inch workpieces, 1-1/4 inch is the standard length. It provides adequate thread engagement in the mating piece without risk of breaking through the far face.
Coarse thread is the correct choice for softwoods, poplar, pine, plywood, and MDF. The wider thread pitch engages more material per turn and provides strong pull-out resistance in these lower-density species. Fine thread is the appropriate choice for dense hardwoods like maple, oak, or cherry.
The Type 17 Auger point has a flute cut into the tip that clears wood fibers as the screw starts. This lowers driving torque, reduces splitting, and helps the screw seat without stalling in denser areas of the workpiece.
This screw is compatible with standard pocket-hole jigs set for 3/4-inch material. The 1-1/4-inch length and pan head geometry match the pocket angle and bearing surface produced by most common jig setups for that stock thickness.
No. The coarse thread is designed for softwoods and engineered panels. For hardwood species like maple, oak, or cherry, a fine-thread face frame screw is the appropriate choice to prevent splitting and achieve proper holding power.
When the job is pocket-hole joinery in 3/4-inch softwood and the shop runs through fasteners in quantity, this Würth #7 x 1-1/4" pan head screw delivers the right geometry, thread, and pack size to keep assembly moving.
Sold In: 7500 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  WW90260 Mfr# 0614176143961 1 | #2 x 6" Square Drive Insert Bit, 2 Piece Bit | ||||
Sold in: 6000 Each |  WW12300 Mfr# 3670000034961 6000 | Würth #7 x 1-1/2" Pan Head Face Frame and Pocket-Hole Screw Square Drive - Type 17 Auger Point Coarse Thread Black, 3670000034961 6000 - 6000/Box | ||||
Sold in: 1000 Each | WW12200 Mfr# 3670000034961 1000 | Würth #7 x 1-1/2" Pan Head Face Frame and Pocket-Hole Screw Square Drive - Type 17 Auger Point Coarse Thread Black, 3670000034961 1000 - 1000/Box | ||||
Sold in: 1000 Each |  WW12000 Mfr# 3670000035961 1000 | Würth #7 x 1-1/4" Pan Head Face Frame and Pocket-Hole Screw Phillips Drive - Type 17 Auger Point Coarse Thread Black, 3670000035961 1000 - 1000/Box |