#8 Washer Head Screw For Face Frames
#8 x 1-1/4 washer head screw describes a Wurth fastener built for face frame and pocket-hole work, so installers get a screw sized for common cabinet joinery instead of a general-purpose wood screw. The coarse thread engages soft woods, MDF, and particleboard, giving strong hold in these materials where finer threads can strip out. The round washer head spreads load at the pocket-hole shoulder, helping prevent the head from crushing into the bottom of the face frame hole during drive-in. The Type 17 auger point starts into wood efficiently by cutting its own path, which reduces splitting risk in soft substrates. A #2 square drive recess pairs with square drive bits, providing positive bit engagement during assembly. The case hardened black finish creates a hard outer surface, supporting wear resistance at the drive recess over repeated installations.
Key Screw Details For Cabinet Workflows
- The #8 x 1-1/4 length targets typical face frame and pocket-hole joints, so fabricators can pull frame members tight without excess projection on the back side.
- The coarse thread is specified for soft woods, MDF, and particleboard, giving bite in these engineered and soft materials where thread purchase is critical.
- The round washer head is designed to prevent the head from crushing into the bottom of the face frame hole, helping preserve pocket geometry and appearance.
- The #2 square drive recess works with square drive bits, supporting controlled torque transfer with reduced cam-out during powered installation.
- The Type 17 auger point cuts into the wood as it advances, promoting smoother starts and reducing driving effort at the beginning of the screw path.
- The case hardened black screw body provides a hardened outer layer, supporting head integrity and drive strength under the stresses of cabinet assembly.
Fastener Design That Supports Repeatable Installation
The Wurth face frame and pocket-hole screw pairs coarse threads with a Type 17 auger point, so the screw advances aggressively into soft woods, MDF, and particleboard while starting cleanly. This combination matters when driving into edge or pocket locations, because the cutting point reduces resistance at entry as the coarse thread quickly locks the joint. The #8 diameter and 1-1/4 inch length are sized to draw typical face frame components together, helping installers seat joints firmly without excessive over-penetration through the mating piece. The round washer head bears against the face frame hole shoulder, so drive pressure is spread across a wider surface instead of concentrating at a small bugle head, which helps maintain a consistent seat at the pocket.
Using This Face Frame Pocket-Hole Screw On Jobs
Where This Wurth Pocket-Hole Screw Performs
This Wurth #8 x 1-1/4 washer head face frame and pocket-hole screw is specified for soft woods, MDF, and particleboard, so it fits cabinet shops and installers working primarily with these substrates. In a face frame assembly, the coarse thread grips the rail or stile material, while the washer head pulls from the pocket side, giving clamping action across the joint. The black case hardened body handles the torque of powered drivers, which is useful during production runs where repeated cycling can stress lesser fasteners. The round washer head geometry supports applications where the screw head remains accessible in a pocket, presenting a broad bearing surface against the machined recess.
Details That Help Accuracy And Reduce Rework
The combination of a Type 17 auger point and coarse thread allows this screw to start cutting as it enters the wood, which helps the screw follow the intended drive path and can assist in maintaining alignment through the joint. By resisting crushing into the bottom of the face frame hole, the round washer head helps keep the pocket shoulder intact, so the joint seats predictably when torque is applied. The #2 square drive interface keeps the bit positively engaged, supporting consistent torque delivery without repeated slipping that can damage the head recess. Because the length and diameter are defined as #8 x 1-1/4, shop setups and drilling patterns can be standardized around this size, which supports repeatable results across multiple cabinets and face frame runs.
Common Questions About This Wurth Screw
What materials is this Wurth face frame screw designed for?
This screw uses a coarse thread specified for soft woods, MDF, and particleboard, so it is suited to common cabinet and casework substrates using those materials.
Why choose a #8 x 1-1/4 washer head screw for pocket holes?
The #8 x 1-1/4 size supports typical face frame and pocket-hole joints, and the washer head pulls against the pocket shoulder to draw members tightly together.
How does the Type 17 auger point help during installation?
The Type 17 auger point cuts its way into the wood as it starts, which promotes a smoother entry and reduces initial driving resistance in soft woods and panels.
What is the advantage of the round washer head on this screw?
The round washer head is designed to prevent the head from crushing into the bottom of the face frame hole, helping maintain a solid bearing surface at the pocket.
Why does this screw use a #2 square drive recess?
The #2 square drive recess works with square drive bits to provide firm engagement, so torque transfers reliably when driving screws in cabinet assemblies.
What does case hardened black construction mean in practice?
The case hardened black screw has a hardened outer layer that supports the strength of the head and drive recess during powered installation work.
Selecting This Screw For Face Frame Jobs
The Wurth #8 x 1-1/4 washer head face frame and pocket-hole screw combines coarse threading, a Type 17 auger point, and a round washer head to support consistent cabinet joinery in soft woods, MDF, and particleboard. The #2 square drive recess pairs with common square drive bits, and the case hardened black construction is built for repeated driving in shop or jobsite conditions. For face frame and pocket-hole joints in these specified materials, this screw offers a targeted fastener choice aligned to that work.
