Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Würth #8 x 7/16" truss head screw is a dedicated installation fastener for mounting European cup hinges, drawer slides, and other cabinet hardware to panel-built cabinets where the short 7/16-inch length keeps the screw safely within the panel without breaking through the back face.
Most European hinge mounting plates and drawer slide brackets call for a short screw that seats the hardware flush against the panel surface without punching through to the cabinet interior. At 7/16 inch, this screw drives fully into the hardware hole and threads into the panel substrate while leaving a comfortable margin of material behind the tip. That makes it the right choice for 3/4-inch panel stock where a longer screw would risk break-through on a thin back panel, an interior partition, or a line-bored face. Cabinet shops assembling frameless boxes and face-frame kitchens both encounter this situation on nearly every hinge and slide installation.
The truss head sits wide and low over the mounting-plate hole, spreading clamping force across the flange rather than concentrating it at a small contact ring. That bearing surface helps seat the hinge plate or slide bracket firmly without distorting the hardware or pulling through the mounting hole under repeated door or drawer cycling. The combo recess accepts a #2 Phillips or a #2 square bit, which means an installer switching between driver setups on a busy production day does not need to stop and swap bits. The zinc finish is appropriate for the dry, climate-controlled environment inside a finished cabinet.
A box of 5,000 is sized for cabinet shops running consistent hinge and drawer slide installations across multiple jobs. At the rate hardware gets mounted on a production run of kitchen or bath cabinets, a single-box inventory keeps the work moving without frequent restocking interruptions. Installers and finish carpenters who source hardware on-site will also find this pack size useful when a job involves a full kitchen or a large built-in with many components to mount.
The 7/16-inch length keeps the tip safely inside 3/4-inch panel stock. A longer screw risks breaking through the back of a thin partition, a cabinet interior surface, or a line-bored panel side where clearance behind the hardware hole is limited.
It is sized for standard European cup hinge mounting plates and drawer slide brackets that use a #8 gauge mounting screw. Always confirm the hardware manufacturer's specified gauge and head clearance before installing.
Yes. The combo recess accepts both a #2 Phillips and a #2 square bit in the same opening, so either driver works.
The truss head is a non-countersunk profile designed to bear against the face of the mounting plate. It does not countersink into the hardware or the panel surface, which is the correct seating geometry for most hinge plates and slide brackets.
The zinc finish is designed for dry indoor use. For installations in high-humidity areas like laundry rooms or outdoor cabinetry, a screw with a more robust corrosion-resistant coating is the better choice.
When panel thickness, hardware geometry, and installation pace all matter on the same job, this 7/16-inch truss head screw covers all three: it stays within the panel, seats the hardware cleanly, and comes in a volume that keeps a busy shop supplied.
Sold In: 5000 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  WW90210 Mfr# 0614176153961 1 | #2 x 1" Square Drive Insert Bit, 2 Piece Bit | ||||
Sold in: 1000 Each |  WW44120 Mfr# 3670000248961 1000 | Würth #8 x 7/16" Truss Head Hinge and Drawer Slide Installation Screw Combo Drive - Sharp Point Coarse Thread Zinc, 3670000248961 1000 - 1000/Box | ||||
Sold in: 1 Each |  WW90220 Mfr# 0614176139961 1 | #2 x 2" Square Drive Insert Bit, 2 Piece Bit | ||||
Sold in: 1 Each |  WW90230 Mfr# 0614176140961 1 | #2 x 3" Square Drive Insert Bit, 2 Piece Bit | ||||
Sold in: 1 Each |  WW90240 Mfr# 0614176142961 1 | #2 x 4" Square Drive Insert Bit, 2 Piece Bit | ||||
Sold in: 1 Each |  WW90260 Mfr# 0614176143961 1 | #2 x 6" Square Drive Insert Bit, 2 Piece Bit |