Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Blum CLIP top hinge opens full overlay doors to 120 degrees on both face-frame and frameless cabinets, with a self-close spring and a nickel finish, fastening to the cabinet via a screw-on base plate sold separately.
The 10 degrees of additional swing compared to a standard hinge makes a real difference in tight kitchens and utility spaces: a door that opens to 120 degrees clears adjacent appliances, deep drawers, and narrow aisles more cleanly than one limited to 110. That extra travel is the reason to specify this hinge over the standard model. The 35mm cup bores into the back of the door, and the straight arm clips to a Blum base plate mounted to the cabinet. That plate is a separate purchase and must be a Blum plate matched to this series. For cabinets without pre-drilled 5mm system holes, the screw-on mount here attaches with wood screws directly into the side panel or face-frame stile, so no line-bore prep is needed.
The hinge body is plated steel finished in nickel, a neutral tone that pairs cleanly with brushed or satin nickel pulls, knobs, and drawer slides. On face-frame cabinets where the hinge arm may be partly visible through an open door, the nickel finish reads as a finished detail rather than raw hardware. The self-close spring draws the door shut without slamming; this is a spring-pull mechanism, not a damped soft-close, so if a cushioned, quiet close is the goal, the BLUMOTION version of this series is the one to specify instead.
This hinge suits face-frame and frameless cabinets in kitchens, baths, laundry rooms, and mudrooms where a wider swing improves daily access. Cabinet shops running production on both frameless and framed boxes can stock a single SKU that serves both. Contractors who work on older homes without line-bored cabinets will find the screw-on plate straightforward to fit without CNC prep. For doors thicker than 22mm, a thick-door hinge is the correct choice. Standard doors in the 16 to 22mm range are the right match here.
No. The hinge clips to a Blum base plate that is sold separately. Use a Blum plate matched to this CLIP top series and your cabinet construction. Plates from other brands will not connect to this hinge.
Self-close. A spring pulls the door shut over the last few degrees of travel. It does not cushion or slow the close. For a damped, quiet close, choose the CLIP top BLUMOTION version of this series instead.
No. The screw-on plate fastens with wood screws directly into the cabinet side or stile, so it works on cabinets that are not line-bored with 5mm system holes. This is one advantage of the screw-on mount for site-built or older cabinets.
Hinge count depends on door height, width, and weight. As a general guide, doors up to about 40 inches tall use two hinges and taller doors use three or more. Consult the Blum load table for the exact count for your door.
Specify this hinge when a full overlay door needs more than the standard 110 degrees of travel and the finish needs to coordinate with nickel hardware across the room.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  BP71T5580 Mfr# 71T5580 | Blum CLIP top 120° Full Overlay Hinge Self-Closing Dowel Mount Nickel-Plated 71T5580 | ||||
Sold in: 1 Each |  BP71T558E Mfr# 71T558E | Blum CLIP top 120° Full Overlay Hinge Self-Closing EXPANDO Nickel-Plated 71T558E | ||||
Sold in: 1 Each |  BP71T5590B Mfr# 71T5590B | Blum CLIP top 120° Full Overlay Hinge Self-Closing INSERTA Nickel-Plated 71T5590B |
