Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Fastcap #10 x 3-inch flat head PowerHead screw is a coarse-thread wood assembly fastener built for shops and crews that move through screws fast. It pairs a broad flat head with milling nibs, a Type 17 auger point, and a #2 square drive, and ships 1,500 to the box so production runs don't slow down for restocking.
A #10 x 3-inch screw reaches deep into the joint, making it well suited for thicker assemblies: face-frame-to-box attachment, cabinet carcass joinery in 3/4-inch stock, panel-to-panel connections, and structural backing behind hardware. The coarse thread grabs quickly in softwood lumber, plywood, MDF, and melamine-faced particleboard. The Type 17 auger point starts without wandering and ejects chips as it advances, so the screw drives consistently even in dense or resinous material. The flat head with nibs countersinks cleanly without a separate drilling step in most wood-based substrates, leaving a flush, filled-ready surface on visible components.
The zinc plating on this screw provides standard galvanic protection suited to dry indoor environments: cabinet shops, millwork plants, furniture manufacturing, and interior finish carpentry. It is the right choice when you need a reliable indoor fastener and are sourcing in volume. For any work involving pressure-treated lumber, exterior exposure, or high-humidity conditions, a corrosion-rated coating is the better call.
A 1,500-piece box is sized for production use, not for the occasional one-off repair. Cabinet shops assembling runs of face-frame boxes, millwork crews fastening panel components on site, and furniture manufacturers running assembly lines all benefit from having a consistent, high-count supply of a single trusted screw size. The #2 square drive reduces the cam-out that slows a production line, and the consistent auger-point geometry means fewer mis-starts and stripped heads when drivers are cycling fast. If your work goes through fasteners by the handful rather than the handful-at-a-time, this box quantity is the right unit to stock.
The PowerHead carries an oversized flat head that is larger in diameter than a standard flat-head screw of the same gauge. The nibs on the underside mill the countersink as the head seats, so the bearing surface sits flush without a separate countersink operation in most wood substrates.
The square recess is designed to hold the screw on a correctly sized bit for one-handed placement and provides better cam-out resistance than a Phillips drive under repeated high-torque cycling. That matters on a production line where a stripped head or a dropped screw costs time.
Coarse thread is the right choice for softwood lumber, plywood, MDF, melamine particleboard, and most wood-based panel materials. It provides strong pull-out resistance in those substrates. For dense hardwood face frames where splitting is a concern, a fine-thread screw is the more appropriate specification.
This screw has a standard zinc finish suited for dry indoor work. Pressure-treated lumber and outdoor exposure call for a coating rated for ACQ compatibility, such as a hot-dip galvanized or multi-layer corrosion-resistant finish.
The Type 17 auger point has a longitudinal flute near the tip that shears and clears wood fibers as the screw advances. This reduces the torque required to drive the screw and lowers the risk of splitting near edges or in denser material compared to a plain sharp (gimlet) point.
When production demands a screw that seats flush, drives consistently, and shows up 1,500 at a time, the Fastcap #10 x 3-inch zinc PowerHead in square drive is the unit to keep on the shelf.
Sold In: 1 Box