Grand River Mission 1-3/4" x 9" Maple Corbel, KB142-M

Grand River Mission Wood Corbel For Bar Support

Grand River mission wood corbel gives you a 1-3/4 inch wide, 4-3/4 inch deep, 9 inch high maple support that works as a decorative bar bracket, so you get a compact footprint that still projects enough for typical overhang layouts. The maple construction means you are working with a hardwood body that takes machining and finishing in a predictable way, which helps keep your prep and install steps consistent across multiple pieces. Grand River Wood Products lists this corbel as part of an economy line of bar bracket corbels, so you get a mission profile suited for straightforward bar or counter runs where cost control is important on repetitive supports. The unfinished wood surface lets you sand, stain, or paint to match surrounding cabinetry or trim, which keeps color matching on site under your control.

Key Mission Corbel Details That Help Your Build

• The 1-3/4 inch width concentrates the corbel into a narrow face, which is useful when you need visual support between cabinet doors or along a bar run without taking much front width.
• The 4-3/4 inch depth gives practical projection from the mounting surface, so you have meaningful visual and structural presence under typical countertop or bar overhangs without overshooting modest depth designs.
• The 9 inch height creates a vertical element that reads as a true bracket, which helps it visually tie together upper surfaces and base cabinetry or wall structure in a mission style layout.
• The maple material aligns with common cabinet hardwoods, so routing, sanding, and edge easing behave like other maple components on the job, keeping your workflow consistent when blending parts.
• The unfinished wood surface arrives ready for your chosen finish schedule, so you can run the corbel through the same stain or paint system as doors, face frames, and trim for a uniform appearance.
• The Grand River Wood Products economy line positioning suits multi-corbel bar runs, so repeated use along a project stays budget-conscious while maintaining a consistent mission look.

Mission Corbel Size And Finish Workflow Considerations

The 1-3/4 inch by 4-3/4 inch by 9 inch sizing means layout for this mission wood corbel centers on its footprint and projection, so you can plan spacing along bars or counters with confidence that each unit occupies a known envelope. Working in maple gives you a hardwood that responds well to standard cabinet shop tooling, so cutting, light shaping, or adding edge breaks can tie the corbel into adjacent maple parts using the same passes and grits. Because the corbel is supplied as unfinished wood, its surface moves directly into your sanding and finishing sequence, letting you align color and sheen with existing or new maple cabinetry on the project.

Using This Maple Mission Corbel In Real Projects

Where This Grand River Maple Corbel Fits Best

This Grand River mission wood corbel is described as an economy line bar bracket corbel, so it lines up naturally with bar applications where multiple supports repeat along a counter. The 4-3/4 inch depth gives presence under modest bar or countertop overhangs, which suits kitchen peninsulas, service counters, or similar runs using compact projections. At 9 inches high, the corbel provides a vertical block of maple that reads cleanly in mission-influenced spaces, so it can sit beneath tops while still aligning visually with base cabinets or support panels. The maple construction keeps it in the same material family as many cabinet face frames and doors, which simplifies visual blending when corbels sit near door stiles or end panels. Because the unit is unfinished, it adapts well in remodels where stain or paint needs to track existing maple finishes, letting you tune color on site.

Why These Corbel Details Support Repeatable Results

The defined 1-3/4 inch width and 9 inch height give you reliable reference dimensions when laying out along a run, so spacing from cabinet edges or wall lines can repeat from piece to piece without guesswork. The 4-3/4 inch depth standardizes how far each mission wood corbel will project, which is useful when laying out corbel faces flush or slightly inboard of a bar edge in a drawing or cut sheet. Maple as the base material supports consistent machining outcomes, so drilling or shallow mortising into the corbel follows the same feed rates and bit choices already in use for other maple components on the job. The Grand River Wood Products economy positioning makes it practical to specify these corbels across an entire project, which keeps the mission style profile and dimensions uniform from one mounting location to the next.

Common Questions About This Mission Wood Corbel

Select This Maple Mission Corbel For Bar Runs

This Grand River mission wood corbel in maple pairs its 1-3/4 inch width, 4-3/4 inch depth, and 9 inch height with an unfinished surface and economy line positioning, so it fits bar and countertop projects that need repeatable mission styling at a controlled cost. For jobs calling for a maple bar bracket corbel that can be finished to match existing or new woodworking, this KB142-M profile supplies a straightforward, dimensionally defined choice ready to drop into your plans.