KV 1-5/16" End Cap, Anochrome, 732 ANO

KV732 Closet Rod End Caps For Closet Tubing

KV732 closet rod end caps are round end caps designed for closet tubing, so each cap finishes the open end of a closet rod and defines a clean stop point for hangers. Made by Knape and Vogt as part number 732 ANO, these end caps tie directly into their closet rods and flanges line, keeping hardware selection consistent across an installation. The 1-5/16 inch diameter sizing aligns with common closet tubing dimensions, so the cap covers the rod edge and creates a visually continuous profile. The anochrome finish provides a uniform metallic look on the exposed rod end, which helps a run of tubing match other anochrome closet components in the same opening. As a simple END CAP, this piece focuses on closing off the rod and presenting a finished face that suits residential or light commercial closet layouts.

Key Details That Support Closet Rod Runs

• The 1-5/16 inch diameter design matches typical closet tubing dimensions, so the cap seats over the rod circumference and creates a defined end without odd steps where garments rest.
• The round end cap shape follows the rod profile, which keeps hanger travel smooth up to the end of the tube instead of catching on cut tube edges.
• The anochrome finish is specified on these end caps, allowing the exposed rod ends to visually coordinate with other anochrome closet components in the same space.
• The Knape and Vogt branding and 732 ANO designation connect this END CAP to a known closet hardware family, simplifying product selection across multiple openings.
• The closet rods and flanges product class aligns these end caps with standard closet organization hardware, so they integrate into typical shelf and rod layouts without overbuilding the solution.

Closet Rod End Cap Fit And Application

These KV732 1-5/16 inch diameter closet rod end caps are specified as round end caps for closet tubing, so their primary fit consideration is matching the tubing diameter in a run. When sized to a 1-5/16 inch tube, the cap covers the raw cut edge and defines the stopping point for hangers at each end of the rod. The anochrome finish relates directly to other anochrome closet components, so installers can plan consistent color and sheen across rods, flanges, and matching hardware. As END CAP parts, they close off each rod in a system and help each opening read as a complete, intentional installation.

Using KV732 End Caps In Closet Layouts

Where These Closet Tubing End Caps Fit Best

Knape and Vogt 732 ANO END CAP pieces are intended for closet tubing within shelf, closet, and garage organization layouts. Their 1-5/16 inch diameter specification aims them at closet rods sized to that dimension, so they are suited to new projects planned around that rod size. As round end caps for closet tubing, they finish each exposed rod end within a reach-in or walk-in closet, and they also align with closet rods and flanges in other storage spaces that follow the same hardware standard. The anochrome finish allows them to sit at eye level on open rods or at higher elevations while still matching the rest of an anochrome-based hardware scheme along the wall.

Details That Help Achieve Consistent Closet Results

The KV732 closet rod end caps carry both the Knape and Vogt name and the 732 ANO part marking, so each selection ties back to a single, consistent specification across multiple openings. Because they are classified under closet rods and flanges, these END CAP components are meant to work as part of a coordinated rod system instead of as improvised finishes, which helps runs of tubing look uniform from one closet bay to the next. The 1-5/16 inch diameter measurement keeps the relationship between tube and cap predictable, giving a clean meeting point where garments ride along the rod. An anochrome finish on every exposed cap ensures the visible terminations of closet tubing align in appearance with other anochrome hardware in the project, which helps installers deliver a unified closet look using standard Knape and Vogt components.

Common Questions About KV732 Closet Rod End Caps

Select KV732 End Caps For Matching Closet Rods

The KV732 1-5/16 inch diameter closet rod end caps from Knape and Vogt give closet tubing a defined, round termination sized for 1-5/16 inch rods. With their anochrome finish and 732 ANO designation, they align with other anochrome closet components in shelf, closet, and garage organization projects. For closet runs built around that rod diameter and finish, these END CAP parts provide a consistent endpoint at each side of the opening, supporting a unified look across the installation.