Hera HO-LED2 LED puck light recess mount

Hera HO-LED2 LED Puck Light For Displays

Hera HO-LED2 LED puck light delivers a high output 3 diode LED source, providing strong illumination where higher levels of LED light are desired, which suits demanding display and showcase applications. The design is ideal for displays, large showcases, and soffits, so it supports projects ranging from retail fixtures to built-in residential features. This fixture is a recess mount only puck, creating a clean, flush look that keeps the focus on the product or surface being lit. A 30 degree beam spread directs light in a controlled cone, helping you highlight merchandise or work areas without wasting light outside the target zone. The puck uses higher quality diodes for improved color quality and bulb life, which supports consistent visual presentation over extended use in commercial or residential installations.

Key LED Puck Details That Support Your Work

• The puck uses a high output 3 diode LED light source, delivering stronger illumination that suits displays and large showcases where bright, focused light is required to properly show product or detail.
• Recess mount only construction lets the puck sit flush to the surface, giving a finished, integrated appearance that works well in cabinetry, soffits, and built-ins where low visual profile is important.
• A 30 degree beam spread focuses light into a tighter cone, helping direct light where it is needed on shelves, counters, or display items while reducing spill on surrounding surfaces.
• The housing is high quality brushed aluminum, providing a clean, modern look that coordinates with typical cabinet and fixture hardware while standing up to regular everyday use.
• This is the only LED puck capable of swiveling plus or minus 20 degrees, allowing you to aim the light toward specific products or surfaces after installation for more precise highlighting.
• Swivel and non-swivel versions are available, so you can match fixed or adjustable light to different locations in the same project while keeping a consistent visual style.
• The puck has a 79 inch connecting cable with plug-in connector, giving generous reach from the light to the driver location to support flexible routing inside cabinets or fixtures.
• The fixture operates with a 9 Watt or 18 Watt LED driver that must be purchased and installed with this LED puck, providing the required power for the high output LEDs.

Recess Mount LED Puck Installation Context

This LED puck is recess mount only, so it is intended to sit in a cutout rather than on the surface, which produces a low profile appearance that blends into cabinetry, shelving, or soffits. The 30 degree beam spread works with the recess mount design to project a focused cone of light from the cabinet or ceiling plane, helping you create defined pools of light on counters or display shelves. The plus or minus 20 degree swivel capability on the swivel version allows the puck to be aimed after it is mounted, which helps when final product placement or display layouts shift. The 79 inch connecting cable with plug-in connector offers length for routing from the recess location to the 9 Watt or 18 Watt LED driver position, supporting practical driver placement within the run.

How This HO-LED2 Puck Works In Real Projects

Using This LED Puck In Displays And Soffits

This HO-LED2 puck is described as ideal for displays, large showcases, and soffits, so it is suited to casework, wall units, and ceiling details where accent or task lighting is integrated into the millwork. The high output 3 diode LED configuration provides substantial light for illuminating products in retail cases or highlighting items in residential built-ins, supporting clear visibility of color and detail. A 30 degree beam spread narrows the light pattern, so the puck can be placed above shelves or inside showcases to wash a specific area rather than the entire room, which helps create contrast and visual focus. The recess mount only design lets the puck sit within the panel thickness, which is useful for display tops or soffit bottoms where a low-profile appearance is required. Swivel and non-swivel versions allow fixed lighting in some locations and adjustable lighting in others, maintaining flexibility across a run of cabinets or cases.

Details That Support Aiming, Layout, And Power

The only LED puck capable of swiveling plus or minus 20 degrees provides post-installation aiming, which helps fine-tune light on merchandise, signage, or work surfaces without moving the fixture cutout. Higher quality diodes improve color quality and bulb life, supporting consistent color rendering and reducing the frequency of lamp changes in busy displays or frequently used areas. The 79 inch connecting cable with plug-in connector offers enough length to route wiring within cabinets and fixtures, simplifying driver placement relative to the recess locations. This puck requires a 9 Watt or 18 Watt LED driver to operate, so the driver choice directly matches the power needs of the LED fixture while fitting into overall lighting layout and wattage planning. The high quality brushed aluminum housing complements typical hardware finishes on cabinetry and commercial fixtures, supporting a unified appearance when the puck is visible.

Common Questions About The Hera HO-LED2 Puck

Selecting This HO-LED2 Puck For Your Project

The HO-LED2 high output 3 diode LED puck from Hera Lighting L.P. pairs a 30 degree beam spread with recess mount only installation, supporting focused, built-in lighting in displays, large showcases, and soffits. The option of swivel and non-swivel versions, plus the 79 inch connecting cable with plug-in connector and required 9 Watt or 18 Watt LED driver, provides a clear path to designing targeted, integrated lighting runs. For projects that call for strong, focused LED light in a clean brushed aluminum housing, this puck offers a purpose-built solution ready to drop into your layout.