tulip bun foot 3-1/4 x 4-3/4 Alder BF44-A

Tulip Bun Foot For Furniture And Cabinet Bases

Tulip bun foot from Grand River Wood Products is a shaped wood support that finishes off the bottom of cabinets or furniture while carrying vertical load. The 3-1/4 inch width gives a compact footprint that works where toe space is limited but a substantial leg is still needed. The 4-3/4 inch height lifts the casework enough for cleaning space or design reveal without pushing overall height too far for standard installations. The alder construction keeps weight manageable while matching projects built in alder stock. The carved tulip profile provides a consistent, machine-made shape that keeps multiple pieces looking uniform across a run of cabinets. As part of the Adjust-A-Trim value line, this bun foot pairs decorative shaping with straightforward installation details, so jobs move quickly once layout is set.

Key Bun Foot Details That Support Your Build

• The 3-1/4 inch wide profile concentrates support in a tight footprint, which helps when laying out legs under smaller cabinets or furniture corners without crowding adjacent components.
• The 4-3/4 inch overall height raises the unit to a predictable dimension, simplifying layout for base reveals and helping align multiple cabinets or furniture pieces on the same project.
• The alder hardwood species matches alder casework, so the foot can be finished in the same system and blend visually with doors, frames, and face material across the installation.
• The tulip bun foot shape, produced as part of the Adjust-A-Trim machine made line, keeps the profile consistent from piece to piece, which reduces layout adjustment and touch-up across longer runs.
• The 5/16 inch diameter hanger bolt provides a defined mounting interface, giving installers a clear fastener size to drill and secure into the mating cabinet or furniture base.

Mounting And Trim Details For This Bun Foot

The 4-3/4 inch high bun foot dimension sets the working elevation at each corner, so once that height is factored into planning, cabinet and furniture bases can be cut accurately to match. The 3-1/4 inch wide cross-section defines how much flat surface is required on the underside of the case for solid bearing, guiding where blocking or rails are placed. The 5/16 inch diameter hanger bolt gives a single, centered connection point, which helps when drilling pilot holes and aligning the foot square to the cabinet edge. Because this tulip bun foot is part of the Adjust-A-Trim value line, installers can expect the same dimensions and interface each time they use Grand River bun foot components on repeat jobs.

Using The Alder Tulip Bun Foot On Projects

Where This Adjust-A-Trim Bun Foot Works Best

This 3-1/4 inch wide x 4-3/4 inch high tulip bun foot fits projects that call for a compact, turned-style base detail under cabinets or furniture. The alder material keeps it aligned with alder frames, panels, or face frames on built-ins and casework, so once stained or top-coated, the foot ties visually into the rest of the piece. The tulip shaping from Grand River's machine made Adjust-A-Trim line keeps each bun foot alike, which supports use in pairs or full sets around a larger cabinet without variation in contour. The defined height lets installers plan for vacuum clearance or design shadow lines at the floor while holding to predictable overall dimensions.

Why These Bun Foot Details Support Repeatable Results

The 4-3/4 inch tall bun foot dimension allows fabricators to standardize their cut lists, knowing the base lift is fixed from job to job. The 3-1/4 inch width means corner blocks or rails can be sized to that footprint, reducing rework when positioning mounting points. The alder hardwood species means the same finishing schedule used on alder doors and face frames can be applied to the bun foot, keeping color and sheen aligned without additional products. The 5/16 inch diameter hanger bolt centralizes the attachment, which helps keep the leg seated straight and reduces the chance of misalignment that could telegraph as a twist at the cabinet corner. Being part of Grand River's Adjust-A-Trim value line also means dimensions and profiles are set by machine production, supporting repeatable outcomes when the same BF44-A part is specified on multiple orders.

Common Questions About The BF44-A Tulip Bun Foot

Select This Tulip Bun Foot For Alder Projects

This 3-1/4 inch wide x 4-3/4 inch high Grand River alder tulip bun foot gives cabinet shops and furniture builders a defined size, species, and mounting interface to plan around. Specifying the BF44-A bun foot keeps future jobs aligned to the same dimensions, profiles, and alder material, so layouts, cut lists, and finishing processes stay consistent from project to project.