48" KV87 Super Heavy-Duty Shelf Standard, Stainless Steel Finish
Description
48 Inch KV87 Shelf Standard For Adjustable Storage
48 inch KV87 super heavy duty shelf standard from Knape and Vogt provides a vertical mounting track for adjustable shelving, so closet, garage, or shop shelves can be positioned where they are needed along the wall. The KV standard model KV87 is typically used with KV186 or KV187 series brackets, so it forms a matched system that supports bracket engagement and helps keep projects consistent across multiple installations. Heavy duty 12 gauge steel construction gives this standard a strong, rigid backbone, which supports demanding storage layouts in wood projects. The stainless steel finish provides a clean, metallic appearance that coordinates with other stainless components in cabinets or utility spaces. Dimensions of 7/8 inch wide by 11/16 inch deep keep the standard relatively slim on the wall while still giving enough profile for secure bracket connection.
Key KV87 Shelf Standard Details For Projects
- The 48 inch length spans a useful vertical run on a wall, so installers can set multiple shelf heights within a single standard segment.
- Dimensions of 7/8 inch wide by 11/16 inch deep keep the standard low profile, which helps it sit close to cabinet or closet panels while still accepting brackets.
- Heavy duty 12 gauge steel material provides a solid track, which supports the bracket interface and helps the standard resist bending under typical shelf loading.
- The stainless steel finish matches other stainless components visually, which helps projects maintain a consistent look in exposed storage areas.
- BHMA Grade 2 compliance ties this standard to an established performance grade, which helps buyers select hardware that aligns with commercial-grade expectations.
- Shelf brackets are adjustable in 2 inch increments, which lets installers set shelf heights on a predictable grid for repeat layouts or paired runs of shelving.
Mounting And Fastener Layout For KV87 Standard
Screw holes spaced 12 inches apart on center along the KV87 standard give installers a regular fastening pattern into studs or panel substrates, helping distribute load along the full 48 inch length. Recommended fasteners, sold separately, are #10 flat-head wood screw, so the screw head seats flush in the standard and allows brackets to engage slots without interference. The 2 inch slot adjustment works together with the 12 inch screw spacing, so shelves can shift up or down while the main fastener pattern stays consistent. With the standard measuring 7/8 inch wide, there is room for screw placement down the center line, supporting straight, repeatable mounting.
Using The KV87 Standard In Storage Runs
Where This 48 Inch KV87 Standard Fits Best
The 48 inch KV87 super heavy duty shelf standard fits storage runs where a moderate vertical range is needed without reaching floor to ceiling, such as mid-height sections of closets or garage systems. Because the KV standard model KV87 is typically used with KV186 or KV187 series brackets, it suits projects already built around those bracket series, keeping hardware consistent across banks of shelves. The 7/8 inch wide by 11/16 inch deep profile works in cabinet interiors or on utility room walls where a slimmer standard is desired to conserve space. Available finishes for the KV87 series include anochrome, stainless steel, and white epoxy, and this version uses the stainless steel finish, which ties into projects that already feature stainless shelving supports or trim pieces.
How KV87 Details Support Repeatable Shelf Adjustment
The 2 inch slot adjustment on the KV87 standard lets shelf brackets move up or down in fixed steps, which helps installers align multiple shelves at matching heights along a run without measuring each bracket position. Shelf brackets that are adjustable in 2 inch increments also simplify changes after initial installation, because shelves can be raised or lowered while still landing on the same grid as neighboring units. Screw holes spaced 12 inches apart on center create a consistent pattern for placing #10 flat-head wood screw fasteners, supporting straight rows of standards across a wall or within a cabinet bank. Heavy duty 12 gauge steel construction gives each standard stability as brackets lock into the slots, which supports repeated adjustments over time without the track flexing excessively. BHMA Grade 2 compliance identifies this standard with a recognized performance level, which helps specifiers match it to projects that call for hardware aligned with that grade of use.
Common Questions About The KV87 Stainless Steel Standard
What type of product is the KV87 87 SS 48 standard?
The 48 inch KV87 super heavy duty shelf standard is a vertical steel track from Knape and Vogt that accepts shelf brackets, creating adjustable shelving in closets, garages, or cabinet projects.
How tall is this Knape and Vogt KV87 shelf standard?
The KV87 87 SS 48 standard has a 48 inch length, which provides a mid-height vertical run suitable for multiple shelf positions on a single standard in many storage layouts.
What are the width and depth dimensions of the KV87 standard?
The KV87 standard measures 7/8 inch wide by 11/16 inch deep, so it stays relatively slim on the mounting surface while still providing enough profile to support engaging shelf brackets.
Which brackets are typically used with the KV87 87 SS 48?
The KV standard model KV87 is typically used with KV186 or KV187 series brackets, so projects using those brackets can match this standard for consistent hardware across shelving runs.
How does the 2 inch slot adjustment affect shelf placement?
The 2 inch slot adjustment means shelf brackets move in 2 inch steps vertically, helping align multiple shelves on a predictable grid without detailed measuring at each bracket location.
What fasteners are recommended for mounting this shelf standard?
The KV87 standard uses recommended fasteners of #10 flat-head wood screw, sold separately, so the screw heads sit flush in the countersunk holes and allow brackets to seat properly.
Selecting This KV87 Standard For Your Project
The Knape and Vogt 48 inch KV87 super heavy duty shelf standard in stainless steel finish combines a 7/8 inch by 11/16 inch profile, heavy duty 12 gauge steel, and 2 inch slot adjustment to support adjustable shelving in wood or metal storage projects. Screw holes spaced 12 inches apart on center and the use of #10 flat-head wood screw fasteners provide a repeatable mounting pattern along studs or cabinet panels. For jobs built around KV186 or KV187 series brackets and BHMA Grade 2 compliant components, this 87 SS 48 model standard offers a matched vertical track ready to support those bracket series in closets, garages, and shop storage runs.
