Domino DF 500 Q 5mm Cutter is a Festool carbide tipped bit designed for the Domino DF 500 Joiner FJ574307, so it matches that machine's drive and mortising system for consistent cabinet joinery. The carbide tipped construction withstands 5,000 to 14,000 joints, depending on material, which supports long service life on repetitive production runs before a cutter change is needed. Spiral flutes are engineered for clean cuts, so the bit helps clear chips and leave a smooth mortise wall for better glue contact. The cutter is internally threaded for quick, easy bit changes, which speeds up service work when swapping worn cutters. This 5mm Domino cutter creates the proper mortise width for Festool tenons, so the slot size is matched to Festool Domino joinery layouts in cabinet and furniture work.
This Domino DF 500 Q 5mm Cutter is for use with the Domino DF 500 Joiner FJ574307 only, so it is matched to that tool's spindle and plunge travel for repeatable mortise location. The 5mm sizing creates the specified mortise width for Festool tenons, which supports consistent joint geometry across rails, stiles, and panels. Spiral flutes are configured for clean cuts that help reduce tear-out inside the mortise, leaving a surface ready for adhesive. The carbide tipped edge is rated for 5,000 to 14,000 joints, depending on material, allowing extended use in production or shop settings. An internally threaded connection provides quick, easy bit changes, so changing cutters becomes a straightforward step in the maintenance routine.
The Domino DF 500 Q 5mm Cutter is specified for the Festool Domino DF 500 Joiner FJ574307, so it is intended for Domino mortising tasks handled by that joiner. The cutter creates the proper mortise width for Festool tenons, so joints follow the Domino system layout that many cabinetmakers use for case, frame, and panel construction. Spiral flutes on the bit are designed for clean cuts, so each plunge into cabinet parts or furniture components clears material efficiently and leaves a smooth mortise wall. Because the cutter is carbide tipped and rated for 5,000 to 14,000 joints depending on material, it is well suited to repeated mortises in production cabinet shops and serious DIY projects that involve many identical joints.
This Domino cutter is internally threaded for quick, easy bit changes, so swapping from a worn cutter to a fresh one can be done rapidly to keep mortise quality consistent across a project. The 5mm size is engineered to create the mortise width required for Festool tenons, which helps each Domino joint seat uniformly without excessive play. Spiral flutes along the cutter body guide chips out of the cut, so the mortise stays clear during the plunge and the resulting hole matches the Festool Domino layout for alignment. The carbide tipped construction withstands 5,000 to 14,000 joints, depending on material, so cut performance remains stable over many mortises before performance loss. Because it is for use with the Domino DF 500 Joiner FJ574307 only, the cutter maintains the system approach that the Festool Domino platform is built around.
The Domino DF 500 Q 5mm Cutter is for use with the Festool Domino DF 500 Joiner FJ574307 only, so it matches that joiner's spindle and plunge system.
The 5mm Festool Domino cutter creates the proper mortise width for Festool tenons, so the slot matches Domino system tenon dimensions for cabinet and furniture joints.
The carbide tipped Domino cutter withstands 5,000 to 14,000 joints, depending on material, which supports extended use before a cutter change is required.
The spiral flutes on the Domino cutter are designed for clean cuts, so they help clear chips and leave smoother mortise walls for consistent glue contact.
The Festool Domino cutter is internally threaded, so it allows quick, easy bit changes that limit downtime when replacing or servicing the cutter.
The 5mm cutter is specified to create the mortise width for Festool tenons, so it supports accurate, repeatable Domino joints in cabinet joinery layouts.
The Domino DF 500 Q 5mm Cutter from Festool is for use with the Domino DF 500 Joiner FJ574307, so it fits directly into existing Domino workflows. The cutter's carbide tipped construction is rated for 5,000 to 14,000 joints depending on material, providing extended service life for shop and jobsite runs. Spiral flutes deliver clean cuts so mortises are ready for Festool tenons, and the 5mm sizing creates the specified mortise width for those tenons. An internally threaded design supports quick, easy bit changes, so cutter rotation fits smoothly into regular tool maintenance between projects.
Sold In: 1 Each