Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
24 inch KV182 heavy-duty shelf bracket from Knape and Vogt is a 24 inch long steel bracket designed to support demanding shelf loads on upright standards. The bracket is part of the KV Model KV182 line, so it follows a proven standard bracket profile that installers recognize for closet, garage, and general shelving layouts built around standards. This specific model is noted as typically used with KV82 series standard, which gives installers a clear match when they are working within an existing KV82 standard run or planning new rows using that standard profile. A white finish on the bracket presents a clean, neutral look that visually blends against painted shelving or white standards in storage and display applications where appearance should align with typical residential and light commercial interiors.
The KV Model KV182 bracket is typically used with KV82 series standard, giving a defined interface between bracket and upright so installers can plan rows of standards knowing this model is intended to hang from that specific series. Two engagement teeth on the bracket fasten into the standard, providing a clear mechanical bite into the vertical slots and helping the bracket lock into position along the run. Two holes in the bottom of the bracket are there so the bracket can be fastened to the shelf, offering a direct metal-to-wood tie point that keeps the shelf positively located along the bracket length for day-to-day use. The 24 inch length allows the bracket to support deeper shelving along that reach, giving more usable shelf depth when the design calls for extended projection from the wall.
The KV Model KV182 is identified as typically used with KV82 series standard, so it naturally fits projects laid out around KV82 upright runs in closets, storage walls, and garage systems relying on that series. In those installations, the two engagement teeth on the bracket are shaped to fasten into the standard slots, helping the bracket hang consistently at the intended pitch across a row. The 24 inch length is suited to deeper shelf designs where extra projection is required for totes, bins, or stacked items along a wall. Because the bracket is part of a family that also offers 5, 7, 10-1/2, 12-1/2, 14-1/2, and 18-1/2 inch lengths, installers can design multi-depth layouts knowing the 24 inch option sits at the long end of that range. That range of lengths within the same model line helps maintain a consistent look and engagement style while stepping shelf depth in a controlled way across a project.
The KV182 bracket uses 16-gauge steel in the shorter 5 through 12.5 inch lengths and 14-gauge steel in the 14-1/2 through 24 inch lengths, so this 24 inch version benefits from the heavier 14-gauge material choice at the long span. Heavier gauge steel in a longer bracket helps the arm resist bending along its length when supporting distributed loads on a deep shelf. The stated weight rating of 200-425 lb per pair, based on length, gives a defined capacity band so installers can align shelf spacing and load expectations with the reach of the bracket. The two holes in the bottom of the bracket allow a direct fastened connection to the shelf surface, tying the wood or panel to the steel arm and helping reduce racking on tall items or uneven loading. Being made in USA supports dimensional consistency from one bracket to the next, which matters when rows of brackets must line up cleanly under a shared shelf in multi-bay runs.
The KV Model KV182 bracket is typically used with KV82 series standard, so it is intended to hang from that style of upright in shelving layouts planned around the KV82 profile.
The KV182 bracket in this listing is 24 inches long, giving deep shelf support for applications where extra projection from the wall is needed for storage or display.
The KV182 bracket has a weight rating of 200-425 lb per pair based on length, providing a published range for planning shelf spans and expected static loads on each pair.
The KV182 bracket uses two engagement teeth to fasten to the standards, creating a mechanical bite into the upright slots that helps keep the bracket seated under load.
The KV182 bracket has two holes in the bottom of the bracket to allow the bracket to be fastened to the shelf, tying the shelf surface directly to the steel arm.
The KV182 line uses 14-gauge steel for 14-1/2 to 24 inch lengths, and this 24 inch bracket carries a white finish, providing a strong arm with a clean, neutral appearance.
The 24 inch KV182 heavy-duty shelf bracket from Knape and Vogt combines a 24 inch length, heavy 14-gauge steel construction in this size range, and a stated 200-425 lb per pair weight rating based on length. Its typical use with KV82 series standard, plus two engagement teeth that fasten into the upright, supports consistent mounting along vertical runs. Two holes in the bottom of the bracket allow the bracket to be fastened to the shelf, tying shelf and bracket together for everyday loading. With its white finish and made in USA origin, this KV182 model 24 inch bracket offers a defined, repeatable option when you need a deep, heavy-duty bracket to match KV82 standards and plan out shelving with predictable support.
Sold In: 1 Each
