Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
KV82 heavy duty twin slot shelf standard describes a 28 inch Knape and Vogt steel standard designed for adjustable shelving runs in closets, garages, or storage walls where a twin slot system is required. The 1-1/16 inch wide profile sets a consistent track for matching brackets, helping installers line up multiple standards for straight, level shelving. At 11/16 inch deep, the standard sits close to the wall, which helps keep shelving layouts tight to studs and reduces projection into the space. Being a KV Model KV82, it is typically used with KV182 series brackets, so the bracket and standard interface is already defined for repeat jobs. The Designer Series designation and third epoxy coat finish add a finished look, letting this standard function in visible residential or light commercial locations where appearance matters as much as utility.
Screw holes spaced 10 inches apart on center define where fasteners land along the 28 inch standard, giving a clear layout for anchoring into framing or solid backing. The 1-1/16 inch width keeps the standard narrow enough to fall cleanly over a stud while still giving bracket tabs a solid bearing surface. With adjustment in 1-1/4 inch increments, each KV182 series bracket engages the twin slots at predictable heights, supporting clean vertical alignment between parallel standards. The 11/16 inch depth allows the standard to sit snug to the wall surface, which helps bracket arms project consistently and keeps overall shelf depth planning straightforward from drawing to install.
The 28 inch KV82 heavy duty twin slot shelf standard in black finish fits runs where mid-height shelving is needed without committing to full wall height lengths. In closet projects, this length supports typical hanging and upper-shelf arrangements between about waist and head height, helping keep storage reachable. In garage or utility applications, the 28 inch standard allows two or three adjustable shelves within a focused work zone, which concentrates load where it is most useful. Because the standard is 1-1/16 inch wide, it sets a repeatable spacing pattern that works well in rows, so installers can plan stud-based layouts knowing each lane occupies minimal wall width. The black epoxy coated finish lets the standard work in more finished garages, mudrooms, or open storage where exposed hardware forms part of the visual design.
Being a KV Model KV82 that is typically used with KV182 series bracket ties this standard into a defined hardware family, which supports consistent performance when repeating details across jobs. The 14-gauge steel material gives each standard enough rigidity for typical Designer Series shelf applications, so when multiple standards are installed, the overall system behaves predictably. Adjustment at 1-1/4 inch increments means shelf spacing can be tuned in small, regular steps, allowing installers to fine-tune clearances for bins, folded clothing, or labeled cartons without awkward gaps. Across a bank of standards, those fixed increments help maintain level shelves, which reduces rework and speeds up layout.
Designer Series standards and brackets with an attractive third epoxy coat finish provide a more refined surface, which helps the hardware resist scuffs during handling and keeps the appearance consistent along a full run. The black epoxy coated option gives designers one of several finishes, alongside almond and white, for matching broader trim or casework schemes on related projects. Screw holes spaced 10 inches apart on center streamline field layout, since installers can use the same measurement repeatedly when setting multiple standards, reducing layout errors. The 11/16 inch depth, combined with the twin slot profile, positions KV182 series brackets at a consistent offset from the wall, which supports accurate planning for shelf depth and clearance to doors or adjacent fixtures. Recommended fasteners are KV82SCRW, so the fastening interface is defined, tying the standard to a dedicated fastener pattern that suits the steel and hole spacing. Made in USA manufacturing offers traceable origin for projects where domestic sourcing aligns with project requirements or documentation. Available lengths from 16-1/2 inches up to 94 inches in the same KV82 series allow installers to pair this 28 inch piece with longer or shorter runs on the same wall while keeping hardware style, finish, and performance uniform.
The product is described as KV Model KV82, which identifies it as part of Knape and Vogt's KV82 Designer Series twin slot shelf standard family for use with matching brackets.
The web description states that this KV82 standard is typically used with VK182 series bracket, so the bracket and standard are intended to work together in a coordinated system.
This KV82 heavy duty twin slot shelf standard is listed at 28 inches in length, making it suited to mid-height shelving sections rather than full floor-to-ceiling installations.
The standard is described as 1-1/16 inch wide by 11/16 inch deep, which keeps it narrow on the wall while still giving enough depth for secure twin slot engagement.
The KV82 standard is adjustable in 1-1/4 inch increments, so brackets move up or down on a fixed grid, simplifying alignment of shelves across multiple standards.
This standard is made from 14-gauge steel with a black epoxy coated finish and an attractive third epoxy coat, combining structural strength with a finished Designer Series appearance.
The 28 inch KV82 heavy duty twin slot shelf standard in black finish from Knape and Vogt offers a defined combination of length, width, depth, and adjustment suited to mid-height shelving zones. With 1-1/4 inch increment adjustment, 10 inch on-center screw holes, and a twin slot configuration typically paired with KV182 series brackets, this standard supports predictable layouts on closets, garages, or storage walls. The 14-gauge steel construction and Designer Series triple-epoxy black finish align appearance and function, letting you keep hardware style and performance consistent across related projects that use other KV82 lengths and finishes.
Sold In: 1 Each
