Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Lattice 96mm distressed brass pull is a zinc die-cast handle from Amerock Corporation designed for decorative cabinet and furniture applications, so it serves both as a working grip and as a visual focal point on doors or drawers. The 3-3/4 inch (96 mm) center-to-center mounting dimension sets the hole spacing, which matters when matching existing drill patterns or laying out new runs consistently. Its overall length of 4-3/8 inch defines the footprint on the face, helping lay out pulls in proportion to stile and rail widths. A 1-1/4 inch projection sets how far the pull stands off the surface, which affects finger clearance and how comfortably the hand engages the handle. The 7/8 inch width establishes the visual weight on the front, which influences how the lattice design reads against varying door styles.
This Amerock Lattice cabinet pull uses a 3-3/4 inch (96 mm) center-to-center mounting layout, which aligns with a common drill standard for cabinet hardware and streamlines layout work across multiple fronts. The overall length of 4-3/8 inch means the handle extends slightly beyond the hole centers, which matters when checking edge distances on narrow rails or smaller drawer faces. A projection of 1-1/4 inch from the mounting surface provides working space for fingers behind the grip, which helps when opening heavier drawers or full-height pantry doors. With a width of 7/8 inch across the front, the pull presents a defined but not oversized profile, which supports balanced spacing when installed side by side on multi-drawer banks.
The Amerock Lattice 96mm distressed brass pull comes from the Lattice collection, which is inspired by woven details and interlocking ornaments, so it suits cabinets and furniture that benefit from decorative metalwork on the face. Its classification as decorative hardware in handles and pulls positions it for use on cabinet doors and drawers rather than structural joinery, focusing its role on access and aesthetics. The distressed brass finish brings a warm metal tone with aged character, which supports pairing with stained woods and painted finishes that echo traditional or classic themes. As part of Amerock decorative hardware and moldings, the pull integrates into projects where a consistent brand and series across multiple handles helps tie together kitchens, baths, or built-ins visually. The 96 mm center-to-center spacing further fits many cabinet layouts that follow metric-based drilling systems for doors and drawer fronts.
The defined 3-3/4 inch (96 mm) center-to-center dimension on this Amerock BP24235DBS pull establishes a fixed drilling pattern, which simplifies replacing existing 96 mm pulls without altering door or drawer fronts. Its 4-3/8 inch overall length means that, once holes are set to the center-to-center dimension, the handle will consistently overhang the holes by the same amount, which helps keep visual reveals uniform across a run. A projection of 1-1/4 inch gives repeatable clearance from the surface, which matters when aligning multiple rows where handles should stand off the face by the same distance. The 7/8 inch width repeats the same front profile, which helps installers maintain straight visual lines when several Lattice pulls are mounted on stacked drawers. The Amerock Corporation part number BP24235DBS identifies this exact lattice design, material, and distressed brass finish, which aids future matching or expansion of an installed project.
The Amerock BP24235DBS pull has a 3-3/4 inch (96 mm) center-to-center size, so existing holes at that spacing line up and new layouts can follow this standard measurement.
The Amerock Lattice 96mm distressed brass pull has an overall length of 4-3/8 inch, which defines how much handle length sits across the front of the cabinet.
This zinc die-cast cabinet pull projects 1-1/4 inch from the mounting surface, providing finger clearance between the pull and the cabinet face.
The Amerock Lattice series handle has a front width of 7/8 inch, giving a defined profile that influences spacing on narrower rails and drawer fronts.
The Amerock BP24235DBS lattice pull is made from zinc die-cast material, providing a solid metal construction with detailed styling.
This Lattice collection cabinet pull uses a distressed brass finish, giving the metal a warmed, aged brass appearance for traditional cabinet designs.
The Amerock Lattice 96mm distressed brass pull combines a 3-3/4 inch center-to-center layout, 4-3/8 inch overall length, and 1-1/4 inch projection, so it supports coordinated drilling, comfortable grip depth, and balanced visual proportion across cabinets. The zinc die-cast construction and distressed brass finish link performance and style within the Lattice collection, allowing multiple doors and drawers to share the same woven-inspired detail. For projects calling for Amerock decorative handles in this exact size and finish, this pull aligns dimensions and appearance under a single BP24235DBS part reference.
Sold In: 1 Each