Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Belwith Keeler Prestige Series pull gives you a solid brass handle with a 5-1/16 inch center to center drill layout, so it suits cabinet doors or drawers already set up for that standard span. The 5-3/8 inch overall length provides enough hand contact for a comfortable grip while staying compact for smaller cabinet faces. A 1 inch projection sets the pull out from the front of the cabinet, which leaves finger clearance without reaching too far into walk paths. The 5/8 inch width creates a slim front profile that works where clearances between adjacent doors matter. The Black Nickel Vibed finish puts a dark metallic look on the solid brass body, which supports visual contrast against many cabinet colors. Manufacturer part number K53-BNV identifies this exact size and finish when matching other hardware in the same space.
The 128 mm center to center measurement on this solid brass cabinet pull guides drilling or reuse of existing holes, so installers can work directly from metric shop drawings or convert from 5-1/16 inch layouts without guessing. With its 5-3/8 inch overall length, the handle covers the area around the mounting points, which helps when aligning pulls across multiple fronts. The 1 inch projection fixes the standoff from the cabinet surface, so doors can open freely without knuckles scraping paint or wood. A 5/8 inch width keeps the pull narrow across the face, which benefits layouts where vertical members or neighboring doors sit close together.
This Belwith Keeler Prestige Series pull is part of a decorative handles and pulls group, so it suits cabinet doors and drawers that call for a 5-1/16 inch center to center spacing. The 128 mm drilling span aligns with many cabinet shop standards, which supports jobs built from both metric and imperial plans. Its 5-3/8 inch overall length gives the pull a balanced footprint on typical kitchen, bath, or utility cabinet fronts, helping the handle sit proportionally between edges. With a 1 inch projection, the pull stands off the surface enough for fingers to catch the bar from above, below, or the side, which aids daily use across different cabinet positions.
The defined 5-1/16 inch center to center spacing lets installers set up a drilling jig once and repeat it across an entire run, which helps keep pull rows level and consistent. At 5-3/8 inch overall length, each handle has a small extension beyond the fixing points, giving a clear visual reference when checking alignment from cabinet to cabinet. The 1 inch projection sets a repeatable off-the-surface distance that supports uniform finger clearance, so every door or drawer equipped with this pull feels similar in use. The 5/8 inch width keeps the front profile steady across all units, which helps lines of hardware read cleanly when viewed down a bank of cabinets. The Black Nickel Vibed finish allows the same physical dimensions to present a uniform dark nickel appearance, which ties multiple cabinets together in a single visual program.
This Belwith Keeler Prestige Series pull has a 5-1/16 inch, or 128 mm, center to center spacing, so it matches cabinet fronts drilled on that common handle layout.
The pull has a 5-3/8 inch overall length, so it slightly overhangs beyond the mounting points and gives a visual margin at each end on the cabinet face.
The cabinet pull projects 1 inch from the surface, so there is consistent space for fingers behind the bar during everyday opening and closing.
The K53-BNV Belwith Keeler pull uses solid brass construction, so the handle body is metal throughout and feels substantial when operated on cabinet fronts.
This cabinet pull has a Black Nickel Vibed finish, so it shows a dark nickel appearance that works with black or nickel-themed decorative hardware schemes.
The specified screw size is 8-32 x 1 inch, so installers can match that thread and length when fastening the pull through standard cabinet door or drawer fronts.
This Black Nickel Vibed Belwith Keeler Prestige Series pull delivers solid brass construction with a 5-1/16 inch center to center layout, so it fits cabinets drilled on that pattern. Matching its 5-3/8 inch length, 1 inch projection, and 5/8 inch width across a project keeps every door and drawer operating with the same clearances and visual proportions. For work that calls for the K53-BNV part number and a consistent dark nickel look, this handle aligns dimensions and finish in one choice.
Sold In: 1 Each