
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Hickory Hardware American Diner pull describes a zinc cabinet pull from the Bistro collection with a black nickel finish, so it gives cabinet and furniture fronts a coordinated look that matches other Bistro series hardware in the same color family. The 3 inch center to center dimension defines the distance between mounting holes, which lets installers lay out drilling patterns confidently across multiple doors or drawers. The pull length of 3-7/8 inch means the grip extends slightly beyond the hole spacing, which provides enough finger clearance for everyday opening without crowding tight cabinet faces. A projection of 1-1/16 inch sets how far the pull stands off the surface, which helps buyers judge clearance near adjacent walls or trim. The width of 11/16 inch defines the front profile, which affects both hand feel and how the pull lines up visually on narrow rails or stile frames.
The 3 inch center to center pull dimension establishes the drilling layout, so installers can set up templates and repeat the same spacing across multiple cabinets for uniform alignment. The pull uses screw size 8-32 x 1 inch, which points to a common machine screw thread that works with standard cabinet door and drawer construction depths. The 3-7/8 inch overall length and 11/16 inch width define how much flat surface is needed, which matters when positioning the pull on narrow rails or near panel edges. A projection of 1-1/16 inch gives insight into hand clearance from the door face, which is helpful when planning spacing relative to nearby countertops, trim pieces, or adjacent doors.
This Belwith Keeler cabinet pull is designed for installations that use a 3 inch center to center hole spacing, so it fits layouts built around that common standard. The Bistro collection identity ties this pull to a defined design family, which serves projects where a consistent hardware theme is required on both cabinet doors and drawers. The pull length of 3-7/8 inch helps it sit comfortably on medium-width drawer fronts or typical kitchen doors, which supports balanced proportions without overwhelming smaller fronts. Its 11/16 inch width gives a modest face size, which can suit both residential cabinetry and smaller furniture pieces that benefit from a slimmer profile. The black nickel finish supports designs that call for a darker metallic tone, which can coordinate with black nickel or similar dark hardware elsewhere in the room.
The 3 inch center to center measurement and 8-32 x 1 inch screw size work together as predictable mounting details, which helps shops and installers keep drilling and fastening consistent across many cabinet openings. The 1-1/16 inch projection gives a fixed stand-off distance, which aids in planning clearances where doors swing past frames or adjacent handles. The 3-7/8 inch overall length creates a known span on the door or drawer front, which assists with setting symmetrical margins from panel edges or rail joints. The 11/16 inch width offers a defined gripping surface, which can influence how far from the panel edge the pull is placed for comfortable reach. Because it is made from zinc with a black nickel finish, the pull combines a metal core with a specific surface color, which supports projects that specify metal decorative hardware in coordinated finishes.
The 3 inch center to center size on this pull describes the distance between the two mounting holes, which guides drilling layout when positioning it on doors or drawers.
The 3-7/8 inch length sets the overall span of the pull on the surface, which helps determine how it fits visually on narrow rails or wider drawer fronts.
The pull has a projection of 1-1/16 inch, which indicates how far it stands off the cabinet face and affects hand clearance and nearby obstructions.
The P2143-BLN pull specifies screw size 8-32 x 1 inch, which aligns with a common machine thread used in many cabinet door and drawer applications.
This cabinet pull is zinc with a black nickel finish, which defines both its metal base and the dark metallic color presented on the visible surfaces.
The 11/16 inch width establishes the front profile, which affects grip feel and how the pull appears on narrow cabinet framing members.
The P2143-BLN black nickel pull from the Bistro collection combines a 3 inch center to center layout with a 3-7/8 inch overall length, so it fits projects built around that common hole spacing. Its zinc construction with a black nickel finish defines both material and color, which helps buyers match it with other dark metallic hardware on cabinets or furniture. With 1-1/16 inch projection and 11/16 inch width, the pull offers defined dimensions that support planning for clearances, layout symmetry, and consistent visual results across multiple installations.
Sold In: 1 Each