Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Hickory Hardware American Diner cup pull gives cabinets a stainless steel finish look while using a zinc body, so you get the visual style of stainless with a zinc construction that suits everyday cabinet use. The 3 inch (76 mm) center to center drilling lets this cup pull line up with a common cabinet hole spacing, which helps on jobs where existing 3 inch bores are already in place. The additional 3-3/4 inch (96 mm) center to center option gives flexibility for layouts using the 96 mm drilling pattern, so one pull style can serve both measurement standards across a space. A 4-5/8 inch overall length keeps the pull proportionate to typical drawer and door widths, giving a balanced look on residential and light commercial cabinetry. The American Diner styling from the Bistro collection ties together spaces that call for a clean, curved cup profile with a consistent stainless tone.
The P2144-SS cup pull is specified with both 3 inch (76 mm) and 3-3/4 inch (96 mm) center to center dimensions, so installers can match the drilling to whichever of these two standards the cabinet layout uses. The 4-5/8 inch overall length means that once the appropriate hole spacing is selected, the pull will span beyond the bore points with a consistent reveal at each end, supporting clean visual alignment from front view. With a projection of 1-1/2 inch, the pull stands off the face of the door or drawer enough to accommodate fingers comfortably, which is important where heavier fronts or taller stack drawers are in use. The 1-1/4 inch width keeps the cup footprint moderate, letting it fit comfortably on narrower rails without overwhelming the stile dimensions.
This Hickory Hardware American Diner cup pull from the Bistro collection fits projects that call for a stainless steel finish appearance on cabinet fronts while using zinc construction. The 3 inch center to center specification aligns with many traditional framed kitchen and bath cabinets, so it suits replacements where that existing drilling is present. The additional 96 mm center to center option makes it suitable for layouts using metric spacing, which often appear in more contemporary or European-style cabinets. With a 4-5/8 inch length, the pull works well on standard-width drawers and doors, creating a proportional look along banks of base cabinets or upper runs. The 1-1/2 inch projection and 1-1/4 inch width together provide a full cup profile that is practical for everyday gripping in residential woodworking environments.
The combination of 3 inch (76 mm) and 3-3/4 inch (96 mm) center to center dimensions on this P2144-SS cup pull helps maintain consistency across mixed layouts, because one model number can be used in spaces where both drilling standards appear. The stainless steel finish on the zinc material lets installers coordinate the hardware tone across doors and drawers while working with a single finish specification, simplifying finish schedules on cabinet drawings. The 4-5/8 inch length sets a predictable span across the rail, which supports straight visual lines when multiple pulls are aligned along a bank of drawers. With a defined projection of 1-1/2 inch, installers know how far the pull will extend into walk paths, an important detail for cabinets near islands or tight corridors. The 1-1/4 inch width gives a repeatable footprint that helps maintain even margins from edges and panel profiles when laying out boring locations.
The P2144-SS cup pull has center to center measurements of 3 inch (76 mm) and 3-3/4 inch (96 mm), which lets it match either of these two common cabinet drilling standards on a project.
This Hickory Hardware American Diner cup pull is made from zinc with a stainless steel finish, giving a stainless appearance while using a zinc construction suited to decorative cabinet hardware.
The Belwith Keeler P2144-SS cabinet pull has a length of 4-5/8 inch, which spans the rail to create a balanced look on typical cabinet drawers and doors.
This stainless steel finish cup pull projects 1-1/2 inch from the cabinet face, giving space for fingers to grip while keeping the profile compact on doors and drawers.
The Hickory Hardware American Diner cup pull has a width of 1-1/4 inch, creating a compact cup profile that fits well on standard cabinet rails.
The P2144-SS cabinet pull is part of the Bistro collection, tying its American Diner styling to that coordinated decorative hardware family.
The Hickory Hardware American Diner cup pull, model P2144-SS, combines a zinc body with a stainless steel finish, so it fits projects needing that stainless look on cabinet fronts. With both 3 inch and 96 mm center to center dimensions specified, this cup pull suits layouts built on either drilling standard, supporting consistent hardware selection across kitchens, baths, and other cabinetry. The defined length, projection, and width give predictable proportions and clearance, which helps plan hole locations and visual lines along doors and drawers when specifying hardware for woodworking work through Wurth Baer Supply.
Sold In: 1 Each