Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Hickory Hardware Mountain Lodge knob gives cabinets and furniture a Windover Antique look using a 1-3/8 inch diameter round profile. The knob is part of the Mountain Lodge collection, so it supports projects that need a coordinated rustic style across multiple doors and drawers. The zinc die cast construction provides a solid feel in the hand while keeping the profile consistent from piece to piece, which helps rows of doors line up visually. The 1 inch projection positions the grip off the face of the door or drawer front, creating finger clearance while keeping the pull point close to the surface for controlled opening. The 3/4 inch base steps down cleanly to the mounting point, which helps cover the drilled hole area and gives a finished transition from knob to cabinet face in everyday use.
This 1-3/8 inch diameter cabinet knob uses an 8-32 threaded connection, which is a common machine screw size in cabinet work and helps tie into standard drilling and boring setups. The 1 inch projection works well where doors and drawer fronts sit close together, because it keeps the grip functional without protruding excessively into walkways or work zones. The 3/4 inch base supports the knob against the face material, which helps distribute turning forces during daily opening and closing. The round shape and centered mounting point allow straightforward positioning on door stiles and drawer fronts, simplifying layout when repeating the Hickory Hardware Mountain Lodge knob across a full kitchen or built-in run.
The Mountain Lodge series identity places this P3061-WOA knob squarely in projects that call for a coordinated decorative hardware look, especially on face-frame or frameless cabinets where knob style is a visible design element. The 1-3/8 inch diameter suits standard cabinet doors and most drawer fronts, giving enough surface to grab without overpowering narrower rails. The Windover Antique finish pairs well with wood tones that have depth and variation, allowing the knob to blend into darker stains while still reading as a defined hardware point. Because the width and base are both 1-3/8 inch and 3/4 inch respectively, the knob also works where the face material has a limited flat land, such as profiled doors that still need a solid mounting zone.
The zinc die cast construction of this Belwith Keeler knob helps hold precise dimensions from piece to piece, so a row of P3061-WOA knobs lines up cleanly along upper or lower cabinets without visible variation in size. The defined 1-3/8 inch diameter and 1 inch projection give installers predictable clearances when laying out knobs near edges, adjacent doors, or appliance panels. The 3/4 inch base creates a repeatable reference area against the cabinet face, supporting drilling jigs that rely on centered mounting for consistent spacing. The Windover Antique finish applied to the zinc body maintains the Mountain Lodge appearance across multiple knobs, which is important when tying together doors, drawers, and other casework under one decorative hardware series. The 8-32 thread standard further supports repeatable installation because it aligns with familiar cabinet hardware fastening methods.
The Hickory Hardware Mountain Lodge knob has a 1-3/8 inch diameter, giving a full grip area that suits typical cabinet doors and drawer fronts in kitchens, baths, and built-ins.
The knob projects 1 inch from the cabinet face, providing finger clearance while staying compact so hardware lines remain tight in smaller spaces or along busy walk paths.
The P3061-WOA knob is zinc die cast, which supports consistent sizing and a solid feel, helping rows of knobs match visually across a cabinet installation.
This cabinet knob uses a Windover Antique finish, giving a darker, aged appearance that works well with the Mountain Lodge collection and warm wood cabinet tones.
The knob is designed for 8-32 threading, a common cabinet hardware size, which supports straightforward use with standard machine screw mounting methods.
The base of the knob measures 3/4 inch, providing a stable contact area that helps cover the drilled hole and gives a visually balanced footprint on the cabinet face.
The Hickory Hardware Mountain Lodge knob in Windover Antique, part number P3061-WOA, brings a defined 1-3/8 inch diameter, 1 inch projection, and 3/4 inch base to cabinet work. The zinc die cast body and Mountain Lodge series styling support coordinated runs of doors and drawers where consistent sizing and a warm, traditional finish matter. For jobs built around Belwith Keeler decorative hardware, these verified dimensions and the 8-32 mounting thread provide a clear, repeatable option when specifying knobs for new installations or updates.
Sold In: 1 Each
