Hickory Hardware Mountain Lodge cup pull gives cabinets and furniture a Windover Antique finish that supports rustic or lodge-inspired projects where consistent appearance across doors and drawers matters. The pull is part of the Mountain Lodge collection, so matching hardware can stay in the same visual family across a room or bank of cabinets. The pull uses a center to center dimension of 3-3/4 inches, or 95 mm, which aligns with many standard drill patterns labeled 96 mm center to center in cabinet layouts. The zinc die cast material forms a solid body that keeps the cup shape stable under daily use on doors or drawers. A total length of 4-1/4 inches gives fingers room to grab behind the lip of the cup, which helps when opening heavier cabinet fronts. A 1-1/8 inch projection holds hands clear of the surface, reducing wear marks around the pull footprint.
This Windover Antique cup pull is drilled on a 3-3/4 inch center to center layout, which corresponds to 95 mm or 96 mm patterns commonly used in cabinet drilling jigs. That spacing lets installers align the pull with existing holes on many cabinet upgrades, which cuts down on layout work when swapping hardware. The 4-1/4 inch overall length covers the span between holes and adds some overhang on each side, helping hide minor chipping or wear around older hole edges on replacement projects. With a projection of 1-1/8 inches, the pull stands off the door or drawer front enough to work with thicker fronts without fingers scraping the surface. The 1-1/8 inch width defines the vertical footprint of the cup, which matters when positioning above rails or within narrow drawer faces so the pull does not crowd nearby lines.
The Hickory Hardware Mountain Lodge cup pull with part number P3064-WOA suits cabinet and furniture work where the Windover Antique finish coordinates with other Mountain Lodge collection pieces. Its 3-3/4 inch center to center drilling lets it work on many base and wall cabinets that already use that spread, making it practical for refresh projects that keep existing hole locations. On new builds, the 95 mm spacing lines up with common metric drilling setups, which helps shops that run line boring or use standard templates. The 4-1/4 inch overall length sets a balanced proportion on medium-width drawers and doors, so a run of pulls can look even across banks of fronts. Because the pull projects 1-1/8 inches, it gives enough hand clearance on doors with thicker profiles or applied moldings near the edge. The 1-1/8 inch width means it can sit comfortably on narrower rails without overpowering the face, which is useful on smaller drawers or furniture pieces.
The zinc die cast construction of this Mountain Lodge cabinet pull creates consistent shapes from piece to piece, which helps installers maintain straight sight lines when mounting multiple pulls in a kitchen or office run. The fixed 3-3/4 inch center to center measurement means every pull shares the same drilling requirement, so jigs or CNC programs using 95 mm or 96 mm spacing can repeat holes efficiently. The 4-1/4 inch overall length gives a predictable coverage area that can be plotted against rail heights and drawer faces in drawings, which supports cleaner layouts with equal margins at the ends of each pull. A 1-1/8 inch projection sets a known stand-off dimension, allowing planners to consider door swing clearance near adjacent objects where hand space is limited. The 1-1/8 inch width defines a repeatable vertical footprint, which is valuable when aligning pulls to stile or rail centers. The Windover Antique finish stays standard across this part number, so replacement pulls ordered later under P3064-WOA can visually match existing hardware from the same collection.
The Hickory Hardware Mountain Lodge cup pull has a 3-3/4 inch, or 95 mm, center to center measurement, which aligns with many cabinet drilling patterns labeled 96 mm for straightforward mounting.
This Windover Antique cup pull has a total length of 4-1/4 inches, giving coverage beyond the hole centers so it can conceal minor wear or chipping around drilled holes on doors or drawers.
The Mountain Lodge cabinet pull is made from zinc die cast, providing a solid, uniform body that holds its cup shape across multiple pulls in a cabinet or furniture installation.
The P3064-WOA pull projects 1-1/8 inches from the cabinet face, offering finger clearance that helps keep hands away from the surface during regular opening and closing.
This cabinet cup pull has a width of 1-1/8 inches, defining the vertical footprint so it can be centered neatly on rails or narrower drawer fronts without overwhelming the face.
The Hickory Hardware Mountain Lodge pull uses a Windover Antique finish, giving a dark, aged metal look that coordinates with the rest of the Mountain Lodge collection.
The Hickory Hardware Mountain Lodge cup pull in Windover Antique pairs a 3-3/4 inch center to center drilling with a 4-1/4 inch overall length, making it useful for both new layouts and replacements that follow 95 mm or 96 mm spacing. Its zinc die cast construction and defined 1-1/8 inch projection and width provide consistent sizing for cabinet runs, helping installers plan hole locations and visual balance across a room. For projects needing Mountain Lodge styling and a Windover Antique finish on regularly used doors or drawers, this P3064-WOA pull offers a clear, repeatable specification to build around.
Sold In: 1 Each
