Berenson Virtuoso Series 5-1/16" (128 mm) Center to Center Rubbed Bronze Pull, - 7137-1010-C

Berenson Virtuoso Series Pull For Cabinet Projects

Berenson Virtuoso Series pull identifies this handle as part of Berenson Corporations Virtuoso Series decorative hardware, which gives cabinet and millwork runs a consistent design language when multiple pieces from the same series are used across a job. The pull is categorized as a handles and pulls product from Berenson, so it is intended for use as functional cabinet hardware where a reliable grip is needed on doors or drawers. This model is described as a rubbed bronze pull, so it presents a rubbed bronze finish that supports warm-toned kitchen, bath, or built-in cabinetry schemes without introducing reflective glare. The pull is made from zinc die cast material, which provides a solid metal body suited to regular opening and closing cycles on residential or light commercial cabinet installations.

Key Virtuoso Pull Details That Support Your Work

• The center to center dimension is 5-1/16 inches, or 128 mm, giving a predictable drilling layout that aligns with common 128 mm cabinet boring patterns and aids straightforward replacement on existing fronts.
• The overall length is listed as 6-3/8 inches, so the handle extends beyond the mounting hole spread, providing finger clearance at both ends that helps users grip the pull comfortably on wider drawer faces.
• The pull width is 13/16 inch, which defines how much rail height the handle occupies on a door or drawer, helping installers visually balance hardware scale against stile and rail dimensions during layout.
• The projection is 15/16 inch, setting how far the front of the pull stands off the cabinet surface, which affects both knuckle clearance and how easily hands can wrap behind the pull on doors and drawers.
• The base diameter is 3/8 inch, which tells you the footprint size at each contact point, helping with decisions about overlay near panel details and how the pull will sit on narrow rails without overhanging edges.

Installation Dimensions For Accurate Pull Layout

The stated 5-1/16 inch center to center measurement defines the exact distance between mounting points, so shop drawings and onsite drilling jigs can be set to 128 mm spacing for consistent hole placement across cabinet runs. The 6-3/8 inch overall length gives the total span of the pull, allowing installers to see how close the ends will come to panel edges or adjacent hardware when planning layouts on smaller doors. With a projection of 15/16 inch from the cabinet face, the pull provides a modest stand-off that is useful for maintaining clearance in tight galley kitchens or utility areas where doors swing near obstacles.

How This Rubbed Bronze Pull Fits Cabinet Use

Where The 128 Mm Virtuoso Pull Works Best

The Virtuoso Series 5-1/16 inch, or 128 mm, center to center rubbed bronze pull is identified for decorative hardware and moldings applications, so it is suited to cabinet doors and drawers where a coordinated appearance with other decorative components matters. The rubbed bronze finish defines its visual character, supporting designs that call for a darker, muted metal tone rather than bright plated hardware on stained wood or painted fronts. Because the pull is part of the Berenson Virtuoso Series, it fits projects where installers want to repeat the same design theme from base cabinets to uppers or built-ins, helping runs of cabinetry look intentionally planned rather than mixed. The handles and pulls product class from Berenson also signals that this piece is sized and shaped to function as everyday cabinet hardware on occupied spaces.

Why The Dimensions Support Repeatable Results

The 128 mm center to center measurement on this zinc die cast cabinet pull means installers can rely on a standard metric boring pattern, which simplifies template setup and supports quick change-outs when refreshing existing cabinets drilled on that spread. The 6-3/8 inch listed length gives a fixed outer span, helping shops keep consistent visual margins from door edges across multiple cabinet sizes, which reduces layout guesswork from piece to piece. With the projection set at 15/16 inch, the pull provides a defined stand-off that helps users grasp the handle without the pull protruding excessively into walkways, which is useful in compact installations. The 13/16 inch width, combined with the 3/8 inch base diameter, defines the contact footprint and face coverage so installers can align the pull cleanly on narrow rails or thicker drawer fronts while maintaining a balanced appearance.

Common Questions About This Berenson Cabinet Pull

Select This Virtuoso Pull For 128 Mm Layouts

The Berenson Virtuoso Series 5-1/16 inch center to center rubbed bronze pull, part number 7137-1010-C, combines a 128 mm mounting spread with a 6-3/8 inch overall length for straightforward cabinet drilling and replacement work. Its zinc die cast construction and rubbed bronze finish align with decorative hardware and moldings applications where consistent design and functional grip both matter. For projects built around 128 mm layouts, this pull provides fixed, documented dimensions that support efficient shop preparation and precise field installation.