Berenson Virtuoso Pull 128mm Center To Center Use

Berenson Virtuoso pull 128mm center to center gives you a defined handle spacing that helps lay out cabinet doors and drawers in a consistent run. The Virtuoso Series identity ties this pull to a coordinated decorative hardware family, useful when matching across a project. The Verona Bronze finish provides a specific bronze tone that sets a predictable visual target when pairing with hinges or other trim. Zinc die cast material forms the body of the pull, creating a solid metal part for everyday cabinet handling. A 5-1/16 inch center to center dimension, also expressed as 128 mm, lets you work in either imperial or metric layouts during drilling and replacement. The 6-3/8 inch overall length establishes the visible footprint on the cabinet face, helping you plan proportions on wider or narrower fronts.

Virtuoso Verona Bronze Pull Details That Matter

• The Virtuoso Series designation groups this pull with matching Berenson decorative hardware, helping keep style consistent across cabinet runs when selecting handles.
• The Verona Bronze finish establishes a defined color and sheen, which supports visual coordination with other bronze-toned components on the same installation.
• Zinc die cast construction creates a formed metal pull body, providing a stable gripping surface for opening and closing frequently used cabinet fronts.
• The 5-1/16 inch, or 128 mm, center to center dimension sets the mounting hole spacing, simplifying drilling layouts and direct replacements using that standard.
• The 6-3/8 inch stated length describes the overall span of the pull, allowing you to balance handle size against drawer width for your chosen design look.
• A projection of 15/16 inch defines how far the pull stands off the cabinet face, giving finger clearance while controlling how far hardware extends into the working area.
• The 13/16 inch width indicates the front profile of the pull, helping you judge how it will read visually on narrower rails or wider drawer fronts.
• A 3/8 inch base diameter sets the footprint at each mounting point, guiding layout around narrow frame members and decorative edge details.

Cabinet Pull Mounting And Size Planning

The 5-1/16 inch, or 128 mm, center to center value drives drilling locations, so cabinet fronts can be marked and bored using that fixed spacing for repeatable alignment. The 6-3/8 inch overall length then shows how much handle span will sit across the panel, informing positioning on small doors versus large drawers. A 15/16 inch projection defines how far the handhold stands off the front, giving working clearance while keeping the pull relatively close to the face. The 13/16 inch width helps you position the pull on narrow stiles without crowding edges. With a 3/8 inch base diameter at each end, you can evaluate how the mounting pads sit on flat rails or raised-panel areas. Zinc die cast material means the mounting area, grip, and bases are formed as a solid metal piece.

Using This Virtuoso Series Verona Bronze Pull

Where This Berenson Virtuoso Pull Fits Best

The Berenson Virtuoso Series pull with 5-1/16 inch, or 128 mm, center to center spacing fits layouts built around that common drilling pattern on cabinet doors and drawers. The 6-3/8 inch overall length suits many standard kitchen and bath cabinet widths, giving a visible handle span without overpowering typical fronts. With a Verona Bronze finish, this pull aligns with projects calling for a bronze-toned accent across face frames and panels. The 13/16 inch width keeps the profile compact so it works on both narrow door rails and broader drawer fronts. Zinc die cast material supports use on frequently accessed cabinets, where a solid metal handle is needed for everyday operation.

Details That Support Consistent Cabinet Results

The defined 5-1/16 inch, or 128 mm, center to center dimension allows repeated drilling along a run of cabinets, supporting straight alignment from door to door. A 15/16 inch projection from the cabinet face gives space for fingers behind the pull, helping users grasp the handle without scraping against the front surface. The 3/8 inch base diameter focuses the contact area around each mounting point, which helps visually anchor the pull on the face. The 6-3/8 inch length and 13/16 inch width together define a consistent handle footprint, making it easier to maintain the same visual weight across upper and lower cabinets. Zinc die cast construction forms a uniform part from grip to bases, which supports a consistent feel from one handle to the next in the same installation.

Common Questions About This Verona Bronze Pull

Select This Virtuoso Pull For 128mm Layouts

The Berenson Virtuoso Series pull with 5-1/16 inch, or 128 mm, center to center spacing, Verona Bronze finish, and zinc die cast construction offers defined dimensions for planned cabinet layouts. The 6-3/8 inch overall length, 15/16 inch projection, 13/16 inch width, and 3/8 inch base diameter provide clear sizing information for aligning this handle with your cabinet door and drawer designs when ordering from Wurth Baer Supply.