Berenson Opus Series 3-3/4" (95 mm) Center to Center Satin Nickel Pull, - 7147-1015-C

Berenson Opus Satin Nickel Pull For Cabinets

Berenson Opus Series satin nickel pull is a 3-3/4 inch center to center cabinet handle designed for consistent alignment across doors and drawers. The pull is part of the Opulence Series, so it follows a coordinated design language that keeps hardware style uniform on a job. Its zinc die cast construction creates a solid-feeling grip that supports repeated daily use on kitchen, bath, and built-in cabinetry. The satin nickel finish diffuses light across the surface, which helps fingerprints and minor marks stand out less in typical residential lighting. With an overall length of 5-1/16 inch, the pull spans beyond the fastener points to give hands a clear, comfortable grab area. The 5/8 inch width provides a defined edge for fingers, which helps users open heavier drawers without slipping off the handle.

Key Berenson Opus Pull Details For Projects

• The 3-3/4 inch center to center dimension establishes a standard drilling pattern, which simplifies layout when repeating this pull across multiple cabinet fronts.
• The 5-1/16 inch overall length provides extra bar beyond the mounting points, giving users a centered gripping area that feels balanced on drawer faces and doors.
• The 1-7/16 inch projection sets the pull off the cabinet face, creating finger clearance that supports a comfortable grip even on thicker door edges.
• The 5/8 inch width defines a narrow, easy-to-wrap profile, which helps users hook fingertips securely when operating smaller fronts or tight spaces.
• The zinc die cast material delivers a solid, uniform body, which supports a consistent feel from pull to pull across an entire installation.
• The satin nickel finish offers a muted metallic sheen, which coordinates with many hinge and appliance finishes in kitchen and bath environments.

Opus Pull Mounting And Fit Considerations

The Opus pull 96mm center to center layout directly corresponds to the 3-3/4 inch drilling dimension, allowing installers to work with either metric or imperial marking tools on site. The M4 x 45mm screw size specification sets the thread and length standard for fastening, which aligns with common cabinet door and drawer front thickness ranges. The base diameter of 9/16 inch at each end of the pull defines the footprint against the cabinet surface, helping installers evaluate how the pull will sit on narrow rails or stile faces. The 1-7/16 inch projection keeps the gripping point away from the door face, which helps users get fingers behind the pull without contacting the cabinet finish every time they open a door.

Using This Berenson 7147-1015-C Cabinet Pull

Where This Satin Nickel Pull Works Best

This satin nickel cabinet drawer pull fits well on cabinet doors and drawer fronts that are drilled on a 3-3/4 inch center to center pattern, supporting straightforward use in standard face frame or frameless layouts. The Opulence Series designation ties this pull to a broader hardware family, which helps maintain one visual style across kitchens, baths, or office built-ins that share the same line. Its 5-1/16 inch length suits both base and wall cabinets, giving a proportional look on typical widths while still leaving space at the ends of narrower drawer fronts. The 5/8 inch wide grip provides enough surface for fingertips without looking oversized on smaller doors, making it adaptable across banks of drawers and mixed cabinet runs. The satin nickel finish coordinates with many common satin nickel appliances and hinges, which helps projects look cohesive when different components meet on the same elevation.

Details That Support Consistent Cabinet Results

The defined 96mm center to center spec lets installers repeat hole locations accurately, which reduces layout variation and keeps handle rows straight across long runs of cabinetry. The 1-7/16 inch projection sets a predictable offset from the face, which helps avoid knuckle contact with the cabinet when users pull, especially on heavier drawers. The 9/16 inch base diameter at each mounting point concentrates the pull footprint, which is useful when aligning the hardware onto narrow rails without overhanging edges. The zinc die cast construction produces a uniform casting, so each pull in a project has the same profile and feel, limiting visual and tactile inconsistencies. The M4 x 45mm screw specification provides a clear fastener standard, which supports efficient installation planning for typical cabinet material thicknesses. Together, these defined measurements help installers repeat drilling, alignment, and operation performance from one cabinet section to the next.

Common Questions About This Opus Cabinet Pull

Selecting This Pull For Cabinet Projects

The satin nickel cabinet drawer pull from the Berenson Opus Series combines a 3-3/4 inch center to center layout, 5-1/16 inch overall length, and 1-7/16 inch projection to support consistent cabinet installations. Its zinc die cast construction and Opulence Series design alignment give projects a unified look and feel from one cabinet run to the next. For work that calls for a satin nickel handle with defined dimensions and an established M4 x 45mm mounting standard, this pull fits straightforward cabinet and drawer applications.