Berenson Opus Series 3-3/4" (95 mm) Center to Center Rustic Tin Pull, - 7148-10RT-C
Description
Berenson Opus Series Rustic Tin Cabinet Pull
Berenson Opus Series rustic tin pull gives cabinets a defined 3-3/4 inch center to center grip, creating a consistent hand feel across doors and drawers. The zinc die cast material forms a solid pull body that supports everyday use in cabinet installations. A 5-1/16 inch overall length spans the cabinet face enough to balance visual weight on typical door and drawer widths. The 1-7/16 inch projection sets the hand clearance off the front, helping fingers grab the pull without rubbing the surface. A 5/8 inch width concentrates the grip so the pull feels secure without crowding smaller fronts. The 9/16 inch base diameter transitions the pull to the cabinet face, helping the pull sit with a defined footprint. The Rustic Tin finish defines the visual tone as a textured, aged metal look for traditional or rustic cabinet layouts.
Key Opus Series Pull Details For Projects
- The 3-3/4 inch (95 mm) center to center dimension sets precise hole spacing, which supports straightforward drilling layouts and repeatable alignment across multiple cabinet fronts.
- The 5-1/16 inch overall length places the pull beyond the hole spread, helping visually center the handle while leaving edge clearances on typical cabinet doors and drawers.
- The 1-7/16 inch projection establishes working clearance from the cabinet face, which helps fingers wrap the pull comfortably when opening heavier doors or drawers.
- The 5/8 inch width focuses the gripping surface, which can aid users who prefer a narrower, defined pull profile on face frames and frameless cabinets.
- The 9/16 inch base diameter creates a compact contact area at the mounting points, helping the pull seat firmly against the cabinet surface at each end.
- The Rustic Tin finish specifies the color tone as a rustic metal look, which supports design choices where a weathered or traditional appearance is desired.
Mounting Dimensions For Straightforward Alignment
This Opulence Series 96mm cabinet pull sets its mounting pattern at 3-3/4 inches center to center, giving a clear measurement for drilling jigs and layout marks. The metric 96 mm reference aligns with many cabinet layout standards, supporting repeatable spacing across doors and drawers. The 5-1/16 inch overall length allows some margin at each side of the mounting holes, which helps fit the pull comfortably on both narrow and wider fronts. A 1-7/16 inch projection defines how far the hand position extends from the cabinet face, which matters when planning clearances near adjacent doors or appliances. With a 9/16 inch base diameter at each end, the pull meets the surface in a compact footprint, helping the installer position it accurately on flat cabinet faces.
Using This Zinc Die Cast Pull In Cabinet Work
Where This Rustic Tin Pull Fits Best
The Opus Series pull belongs to the Opulence Series collection, positioning it within a coordinated line of decorative cabinet hardware. The 3-3/4 inch center to center spacing aligns with a common cabinet pull size, fitting typical kitchen, bath, and built-in cabinet layouts that follow this standard pattern. Its 5-1/16 inch overall length allows the pull to sit well on both door rails and drawer fronts where a moderate handle span is needed. The Rustic Tin finish supports projects that call for an aged metal appearance, helping it pair with stained woods and painted finishes that lean traditional or rustic. Within the Decorative Hardware and Moldings, Handles and Pulls category, this pull serves as a primary touch point on cabinetry, making the defined size and finish useful for coordinated runs of doors and drawers.
Details That Support Repeatable Cabinet Results
The zinc die cast material gives the pull a formed metal structure, which matters when repeating the same style across an entire room of cabinets. A 1-7/16 inch projection establishes a predictable stand-off from the cabinet face, helping installers maintain consistent ergonomics across multiple elevations. The 5/8 inch width keeps the grip profile slim, which can simplify layout when multiple pulls sit close together, such as on narrow drawer stacks. The 9/16 inch base diameter defines a tight landing area at each mounting point, which helps align the pull over pre-bored holes with minimal visual overhang. The specified M4 x 45mm screw size gives a clear thread and length reference, tying this pull to common cabinet door and drawer construction thicknesses that accept metric machine screws.
Common Questions About This Opus Series Pull
What are the center to center dimensions on this pull?
The Berenson Opus Series rustic tin pull has a 3-3/4 inch (95 mm) center to center measurement, giving a clear drilling distance for consistent mounting across multiple cabinet fronts.
How long is the Berenson 7148-10RT-C pull overall?
The Berenson 7148-10RT-C pull measures 5-1/16 inches in overall length, which places the handle neatly on most cabinet doors and drawers without extending too close to the edges.
What material is this Opulence Series handle made from?
This Opulence Series handle is made from zinc die cast, giving it a solid metal construction that supports repeated cabinet use in everyday residential environments.
What is the projection of this rustic tin cabinet handle?
This rustic tin cabinet handle projects 1-7/16 inches from the cabinet face, providing hand clearance that helps users grab and pull doors or drawers comfortably.
How wide is the grip area on this cabinet pull?
The cabinet pull has a 5/8 inch width, focusing the grip into a narrower profile that suits both slim drawer fronts and standard cabinet doors.
What screw size does this Berenson cabinet pull use?
This Berenson cabinet pull uses M4 x 45mm screws, matching a common metric machine screw size used in many cabinet door and drawer constructions.
Selecting This Pull For Cabinet Installations
Berenson Opus Series rustic tin pull provides a defined 3-3/4 inch center to center layout, a 5-1/16 inch overall length, and a 1-7/16 inch projection, giving installers clear dimensions for cabinet drilling and placement. The zinc die cast construction and Rustic Tin finish align with projects that call for a metal pull in an aged tone. For runs of doors and drawers using the Opulence Series collection, this handle supplies consistent sizing, appearance, and mounting details suited to decorative cabinet hardware work.