Berenson Opus Series 3-3/4" (96 mm) Center to Center Rubbed Bronze Pull, - 7149-1010-C

Opus Pull 96mm Rubbed Bronze For Cabinets

Opus pull 96mm rubbed bronze describes a Berenson Corporation cabinet handle from the Opulence Series that uses a 3-3/4 inch center to center mounting, giving you a defined drilling layout for consistent handle placement across doors and drawers. The zinc die cast material forms a solid, uniform pull body, so each piece matches in shape and feel when you are outfitting a full run of cabinetry. Its rubbed bronze finish provides a dark, warm tone on the handle surface, supporting projects that call for bronze-colored decorative hardware. The overall 5-1/16 inch length spans more of the drawer or door front than the 3-3/4 inch mounting centers, creating a visible grip area beyond the screw holes. A 1-7/16 inch projection sets the pull out from the cabinet face, allowing finger clearance between the 5/8 inch wide grip and the door or drawer surface during everyday use.

Key Opulence Series Pull Details For Projects

• The Opulence Series designation groups this pull with matching decorative hardware, helping you keep a consistent style when selecting handles for a full kitchen, bath, or furniture piece.
• The zinc die cast construction gives the pull a formed metal body, which supports precise detailing along the handle profile for a coordinated look on multiple cabinets.
• The rubbed bronze finish provides a dark, bronze-toned surface on the pull that can visually tie into bronze hinges or other bronze-colored components on the same installation.
• The 3-3/4 inch (96 mm) center to center measurement defines hole spacing, which supports accurate template use and repeatable drilling when laying out multiple cabinet fronts.
• The 5-1/16 inch overall length gives added visual coverage on door and drawer faces, which can help proportion the handle to medium-width cabinet fronts and drawer fronts.
• The 1-7/16 inch projection holds the grip away from the cabinet face, creating functional space behind the 5/8 inch wide handle for fingers to pull doors open comfortably.

Mounting And Fit Details For This Cabinet Pull

The 3-3/4 inch center to center layout on this Berenson Opus Series pull sets the spacing for the mounting points, so once those holes are drilled, the handle sits in a fixed, repeatable position on each cabinet. The specified M4 x 45mm screw size matches the threaded inserts in the pull, guiding you toward the correct screw diameter and thread for proper engagement with the zinc die cast body. With a 5-1/16 inch overall length, the pull extends slightly beyond the mounting centers on both sides, which helps it sit balanced on faces where the drilled holes align along a centerline. The 9/16 inch base diameter at each post defines the footprint where the pull meets the door or drawer, supporting a clean transition between the rubbed bronze hardware and the cabinet surface.

Using The Opus Series Pull In Real Projects

Where This Rubbed Bronze Pull Fits Best

This Berenson Opus Series pull belongs in decorative hardware applications where a 3-3/4 inch (96 mm) center to center handle is required, aligning directly with jobs that already specify that mounting dimension. The rubbed bronze finish suits projects that call for bronze-toned handles, so it can be used on cabinet doors and drawers where other bronze-finished components are present. With a 5-1/16 inch overall length and 5/8 inch width, the pull works on cabinet faces that offer enough flat area to accommodate that footprint without crowding neighboring details. The 9/16 inch base diameter at each mounting point defines how much space the posts occupy on the surface, helping the pull sit neatly on face frames or flat-panel doors in kitchens, baths, and built-in cabinetry.

Details That Support Consistent Cabinet Results

The 96 mm center to center measurement on this zinc die cast pull supports consistent drilling patterns, because installers can rely on a single hole spacing standard across multiple doors and drawers. Using the M4 x 45mm screw size with the pull matches the hardware to its internal threading, helping the handle seat firmly against the cabinet surface without stressing the zinc die cast posts. The 1-7/16 inch projection gives a defined stand-off from the door or drawer, which keeps hands clear of the cabinet face and reduces contact with finished surfaces during repeated use. The 5/8 inch width across the grasping area balances grip surface with a slim profile, supporting a comfortable hold while keeping the handle visually proportional. Together, the Opulence Series designation, rubbed bronze finish, and consistent dimensions allow this pull to be repeated across a run of cabinetry with matching appearance and predictable mounting dimensions.

Common Questions About This Berenson Cabinet Pull

Select This Pull For 96mm Bronze Cabinet Runs

The Berenson Opus Series 3-3/4 inch (96 mm) center to center rubbed bronze pull combines a zinc die cast body, 5-1/16 inch overall length, and 1-7/16 inch projection for defined cabinet handle geometry. For projects that call for rubbed bronze decorative hardware with 96 mm mounting, this pull gives cabinetmakers and installers a consistent Opulence Series option that maintains matching dimensions and finish from one door or drawer to the next.