Berenson Opus Series 5-1/16" (128 mm) Center to Center Satin Nickel Pull, - 7151-1015-C

Opus Pull 128mm Satin Nickel For Cabinets

Opus pull 128mm satin nickel describes a Berenson Opus Series cabinet pull with a 5-1/16 inch (128 mm) center to center hole spacing, giving installers a precise layout reference for drilling or aligning existing cabinet holes. The pull is part of the Opulence Series, so it follows a coordinated design language when matching other Berenson decorative hardware on the same project. Its satin nickel finish provides a muted metallic look that helps visually tie together hinges, knobs, and other visible hardware in a consistent way. The pull is made from zinc die cast material, which delivers a solid-feeling handle while allowing for accurate casting of the 6-3/8 inch overall length and detailed profile. A projection of 1-1/4 inch and width of 13/16 inch set how far the pull stands off the door or drawer front, affecting hand clearance and visual balance.

Key Pull Details That Support Cabinet Work

• The 5-1/16 inch (128 mm) center to center measurement sets exact hole spacing, which simplifies layout on new cabinet doors and drawers or matching an existing drilling pattern in a remodel.
• The 6-3/8 inch overall length establishes the visible span of the Berenson Opus Series 7151-1015-C pull, helping plan proportion and alignment on wider or taller fronts where handle size affects visual symmetry.
• The satin nickel finish defines the surface appearance, so the pull can coordinate with other satin nickel cabinet hardware on the job for a uniform look across a kitchen, bath, or built-in installation.
• The zinc die cast construction provides a metal body for the pull, giving it mass and shape stability that supports repeated daily use on heavily used cabinet drawers and doors.
• The 1-1/4 inch projection combined with a 13/16 inch width controls how far the pull sits off the face, which influences finger clearance and reduces interference near adjacent doors or vertical frames.
• The base diameter of 11/16 inch sets the footprint at each mounting point, helping cover typical cabinet bore marks while leaving enough flat surface for secure contact against the door or drawer.

Installation Dimensions And Mounting Interface

The 128 mm center to center spacing on this Berenson Opus Series pull defines the exact distance between mounting points, so drilling or measuring can follow a single metric dimension across all cabinets on the project. A 5-1/16 inch center to center value mirrors that same spacing in imperial units, helping when layouts or shop drawings are expressed in inches. The specified M4 x 45mm screw size describes the thread and length used to fasten the pull through the door or drawer front, which connects the handle solidly to standard cabinet panels within that thickness range. With an 11/16 inch base diameter at each mounting point, the pull contacts the surface around each screw location in a defined circle, helping distribute clamping force and visually finish the mounting area.

Using This Satin Nickel Pull In Cabinet Projects

Where The Opulence Series Pull Works Best

This Berenson Opus Series pull belongs to the Opulence Series, so it fits projects where matching decorative hardware is used on multiple cabinets, such as full kitchen runs or coordinated bath suites. The satin nickel finish suits cabinets where a softer metallic tone is preferred, allowing the hardware to blend with satin nickel faucets, hinges, and other trim. With a 6-3/8 inch overall length and 5-1/16 inch center to center, the pull scales well on standard drawers and doors that benefit from a handle spanning a larger portion of the front. The 1-1/4 inch projection positions the grip forward from the cabinet face, giving room for fingers to wrap behind the pull on thicker drawer fronts or door rails.

Details That Support Consistent Layout And Feel

The defined 128 mm center to center spacing lets installers repeat the same drilling template across all doors and drawers, which speeds production and keeps every pull lined up straight along cabinet runs. The 13/16 inch width gives the handle a steady gripping surface, so hands contact a broad, smooth area instead of thin edges when opening heavier drawers. Zinc die cast construction allows the 7151-1015-C pull to maintain its cast shape while carrying the weight of loaded cabinet storage behind it. The 11/16 inch base diameter around each mounting point covers typical hole edges, presenting a finished look at the contact point and aligning neatly around the screw centers. The satin nickel finish also defines the surface sheen, which affects how fingerprints show and how the pull visually ties together multiple fronts under varying light.

Common Questions About This Berenson Cabinet Pull

Selecting This Pull For Satin Nickel Cabinets

The Berenson Opus Series 5-1/16 inch (128 mm) center to center satin nickel pull brings a zinc die cast body, 6-3/8 inch overall length, and a defined 1-1/4 inch projection to cabinet projects, giving a consistent mounting pattern and hand feel across doors and drawers. The Opulence Series styling and satin nickel finish align with other satin nickel cabinet hardware, supporting a unified appearance in kitchens, baths, or built-ins. For projects calling for this exact 128 mm center to center spacing and satin nickel finish, this 7151-1015-C pull is suited to be specified as the handle choice.