Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Opus Series pull gives you a 5-1/16 inch, or 128 mm, center to center grip that lines up cleanly with standard drilling patterns on many cabinet doors and drawers. The pull is part of Berenson Corporation's Opulence Series, so it keeps a consistent style with other pieces from that collection on the same job. Its zinc die cast construction creates a solid-feeling handle that supports repeated daily use on working cabinets. The rubbed bronze finish presents a dark, traditional look that pairs well with warm wood tones in kitchens, baths, and built-ins. Overall length of 6-3/8 inches leaves enough bar beyond the screw centers to grab comfortably without crowding the hand. A projection of 1-1/4 inches from the mounting surface creates clearance for fingers, reducing knuckle drag against the cabinet face during use.
This Opulence Series pull uses a 128 mm, or 5-1/16 inch, center to center screw layout, which lines up with many metric-based cabinet boring patterns and simplifies replacement where that spacing already exists. The pull is designed for M4 x 45mm screws, so the threaded interface matches common cabinet hardware setups using metric machine screws. An 11/16 inch base diameter at each mounting foot gives enough footprint to cover typical previous screw holes of similar size, helpful when updating existing fronts. With a 6-3/8 inch overall length and 1-1/4 inch projection, the handle's outer edges and stand-off can be planned around nearby edges, trim, or adjacent hardware so handles do not interfere with each other in tight runs.
The Berenson Opus Series 5-1/16 inch center to center rubbed bronze pull works well on cabinet doors and drawers laid out on a 128 mm drilling pattern, because its mounting holes match that spacing. In kitchen and bath installations, the 6-3/8 inch overall length distributes the visual mass of the handle across a reasonable section of the front, which helps doors and drawers look proportionate in banks of cabinets. The rubbed bronze finish coordinates with design schemes that favor warm metals, allowing this pull to align with faucets, lighting, or hinges in similar tones. For office or utility cabinetry, the zinc die cast construction provides a sturdy gripping point for frequent use, while the 13/16 inch width gives users a comfortable, secure grasp when opening heavier drawers.
The 128 mm center to center dimension is especially useful when swapping hardware on existing cabinets bored to that metric spacing, because it allows reuse of current hole locations instead of altering fronts. Using the specified M4 x 45mm screws maintains a consistent thread and length standard across the run, which can streamline hardware changes on multiple fronts of similar thickness. The 11/16 inch base diameter around each mounting point helps cover slight chipping or wear from older pulls, improving the finished look without extra repair steps. A projection of 1-1/4 inches offers enough stand-off so fingers clear the cabinet surface, which can reduce scuffing around the handle area over time. The Opulence Series designation ties this pull to a broader collection from Berenson Corporation, enabling coordinated hardware selection across doors and drawers within the same project.
The Berenson Opus Series pull uses a 5-1/16 inch, or 128 mm, center to center spacing, which suits cabinet work laid out on that common metric drilling pattern.
The Opus Series 7153-1010-C pull is zinc die cast, giving the handle a solid metal body that stands up to frequent cabinet door and drawer operation.
This rubbed bronze cabinet pull measures 6-3/8 inches in overall length, which provides a generous gripping span on standard cabinet doors and drawers.
The Berenson Opulence Series pull projects 1-1/4 inches from the cabinet surface, giving fingers space behind the handle for a comfortable grip during use.
This cabinet pull uses M4 x 45mm screws, so the mounting threads match common European-style cabinet hardware layouts using metric machine screws.
The pull has an 11/16 inch base diameter at each mounting point, which helps cover minor imperfections around the screw holes on cabinet fronts.
The Berenson Opus Series pull with 128 mm center to center spacing, rubbed bronze finish, and zinc die cast construction gives you defined dimensions for cabinet layout and replacement work. Its 6-3/8 inch overall length, 1-1/4 inch projection, and 13/16 inch width offer a comfortable grip that suits daily use on doors and drawers. By matching the 128 mm drilling pattern and M4 x 45mm screw specification, this pull aligns well with many metric-based cabinet systems, helping streamline installation across a run of cabinets on your next project.
Sold In: 1 Each
